Influence of solvents on the formation of ultrathin uniform poly(vinyl pyrrolidone) nanofibers with electrospinning

Although there have been many reports on the preparation and applications of various polymer nanofibers with the electrospinning technique, the understanding of synthetic parameters in electrospinning remains limited. In this article, we investigate experimentally the influence of solvents on the morphology of the poly(vinyl pyrrolidone) (PVP) micro/nanofibers prepared by electrospinning PVP solution in different solvents, including ethanol, dichloromethane (MC) and N,N‐dimethylformamide (DMF). Using 4 wt % PVP solutions, the PVP fibers prepared from MC and DMF solvents had a shape like a bead‐on‐a‐string. In contrast, smooth PVP nanofibers were obtained with ethanol as a solvent although the size distribution of the fibers was somewhat broadened. In an effort to prepare PVP nanofibers with small diameters and narrow size distributions, we developed a strategy of using mixed solvents. The experimental results showed that when the ratio of DMF to ethanol was 50:50 (w/w), regular cylindrical PVP nanofibers with a diameter of 20 nm were successfully prepared. The formation of these thinnest nanofibers could be attributed to the combined effects of ethanol and DMF solvents that optimize the solution viscosity and charge density of the polymer jet. In addition, an interesting helical‐shaped fiber was obtained from 20 wt % PVP solution in a 50:50 (w/w) mixed ethanol/DMF solvent. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3721–3726, 2004     

Preparation and characterization of rigid poly(vinyl chloride)/MMT nanocomposites. II. XRD,morphological and mechanical characteristics

A Haake torque rheometer equipped with an internal mixer is used to study the influence of the amount of sodium montmorillonite (Na⁺‐MMT) and organically modified MMT (O‐MMT) on X‐ray diffraction (XRD), morphology, and mechanical characteristics of rigid poly (vinyl chloride) (PVC)/Na⁺‐MMT and PVC/O‐MMT nanocomposites, respectively. Results of XRD and transmission electron microscopy (TEM) indicate that MMT is partially encapsulated and intercalated in the rigid PVC/Na⁺‐MMT nanocomposites. However, results of XRD and TEM show MMT is partially intercalated and exfoliated in the rigid PVC/O‐MMT nanocomposites. Tensile strength, yield strength, and elongation at break of the rigid PVC/MMT nanocomposites were improved simultaneously with adding 1–3 wt % Na⁺‐MMT or O‐MMT with respect to that of pristine PVC. However, the addition of Na⁺‐MMT or O‐MMT should be kept as not more than 3 wt % to optimize the mechanical properties and the processing stability of the rigid PVC/MMT nanocomposites. SEM micrographs of the fractured surfaces of the rigid PVC/Na⁺‐MMT and PVC/O‐MMT nanocomposites both before and after tensile tests were also illustrated and compared. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2145–2154, 2006     

The stereochemistry of bicyclo[3.2.1]-octane—XII The photohalogenation of bicyclo[3.2.1]octene-2 derivatives

The light-initiated halogenation of bicyclo[3.2.1]octene-2, its 3-phenyl and 3-bromo derivatives with N-bromosuccinimide and t-butyl hypochlorite resulted in the exclusive formation of the exo-4-halobicyclo[3.2.1]octene-2-derivatives.     

Thermal Studies on Rare Earth Metal Ion Chelates of 8-Hydroxyquinoline, 8-Hydroxyquinaldine and Their Derivatives

The thermal behaviors of chelates of oxine, 8-hydroxyquinaldine and their derivatives (DCQ, 5, 7-dichloro-8-hydroxyquinoline; DCQ', 5, 7-dichloro-8-hydroxyquinaldine) in an air atmosphere have been studied. The order of heat stability of chelates, decreased with decreasing basicity of the ligand, i.e. oxine<DCQ<DCQ'. The presence of water or proton-containing compounds in the chelates seemed to lower heat stabilities,     

Fumigant Activity of Bacterial Volatile Organic Compounds against the Nematodes Caenorhabditis elegans and Meloidogyne incognita

Plant-parasitic nematodes infect a diversity of crops, resulting in severe economic losses in agriculture. Microbial volatile organic compounds (VOCs) are potential agents to control plant-parasitic nematodes and other pests. In this study, VOCs emitted by a dozen bacterial strains were analyzed using solid-phase microextraction followed by gas chromatography–mass spectrometry. Fumigant toxicity of selected VOCs, including dimethyl disulfide (DMDS), 2-butanone, 2-pentanone, 2-nonanone, 2-undecanone, anisole, 2,5-dimethylfuran, glyoxylic acid, and S-methyl thioacetate (MTA) was then tested against Caenorhabditis elegans. DMDS and MTA exhibited much stronger fumigant toxicity than the others. Probit analysis suggested that the values of LC₅₀ were 8.57 and 1.43 μg/cm³ air for DMDS and MTA, respectively. MTA also showed stronger fumigant toxicity than DMDS against the root-knot nematode Meloidogyne incognita, suggesting the application potential of MTA.     

Inducing anisotropy in bulk Nd-Fe-Co-Al-B nanocrystalline alloys by quenching in magnetic field

We have observed magnetic anisotropy in bulk Nd_55−xCo_xFe₃₀Al₁₀B₅ (x=10, 15 and 20) alloys prepared by copper mold suction casting method with a presence of external magnetic field (quenching field) μ₀H=0.25 T. By changing direction of the measuring field from perpendicular to parallel one in comparison with that of the quenching field, coercive force of the alloys slightly decreases while remanent magnetization and squareness of hysteresis loop increase more clearly. It is also found that the higher Co-concentration in the alloys the larger magnetic anisotropy is induced. The structure analyses manifest nanocrystalline particles embedded in residual amorphous matrix of the alloys. The size of the particles is in range of 10-30 nm and their crystalline phases consist of Nd₂(Fe,Co)₁₄B, Nd₃Co, Nd₃Al, NdAl₂ and Nd.     

Crack-free micromachining on glass substrates by visible LIBWE using liquid metallic absorbers

Laser induced backside wet etching (LIBWE) is a promising laser direct-write technique for etching transparent materials and for producing high precision and near-optical quality surfaces. In this study, visible LIBWE using gallium and eutectic indium/gallium as absorbers was used for crack-free microfabrication of sodalime and quartz. Eutectic indium/gallium (In/Ga) has a melting temperature lower than metallic gallium does and the etching rate by using In/Ga was found to be similar to that by gallium for visible LIBWE. When using the gallium absorber, the etching threshold of quartz by visible LIBWE was about one-third of that by UV LIBWE. The heat-affected zone of the quartz etching was negligible at the trench rim in the visible LIBWE process. The wettability of the metallic absorbers on the substrates affects aspect ratio and is a new important factor for LIBWE. In addition, etching rate decreased when repetition rate was increased.     

Thin TiO2 grown by metal–organic chemical vapor deposition on (NH4)2S x -treated InP

The electrical characteristics of thin TiO₂ films prepared by metal–organic chemical vapor deposition grown on a p-type InP substrate were studied. For a TiO₂ film of 4.7 nm on InP without and with ammonium sulfide treatment, the leakage currents are 8.8×10⁻² and 1.1×10⁻⁴ A/cm² at +2 V bias and 1.6×10⁻¹ and 8.3×10⁻⁴ A/cm² at −2 V bias. The lower leakage currents of TiO₂ with ammonium sulfide treatment arise from the improvement of interface quality. The dielectric constant and effective oxide charge number density are 33 and 2.5×10¹³ cm², respectively. The lowest mid-gap interface state density is around 7.6×10¹¹ cm⁻² eV⁻¹. The equivalent oxide thickness is 0.52 nm. The breakdown electric field increases with decreasing thickness in the range of 2.5 to 7.6 nm and reaches 9.3 MV/cm at 2.5 nm.