CeO2-ZrO2-Y2O3对Pt-Rh型三效催化剂性能的影响

采用共沉淀法技术制备了Ce0.35Zr0.55Y0.10固溶体,并对其进行了比表面积、储氧量的测试和XRD的表征.将其用于低贵金属Pt-Rh型三效催化剂的制备,考察了CeO2-ZrO2-Y2O3对三效催化剂性能的影响.结果表明,Ce0.35Zr0.55Y0.10具有与Ce0.50Zr0.50O2相似的立方结构和相近的储氧量,经高温(1000 ℃)后仍能保持较大的比表面积(38.66 m2·g-1).和含Ce0.50Zr0.50O2的三效催化剂相比,含CeO2-ZrO2-Y2O3的三效催化剂经高温老化后,C3H8,CO,NO仍具有较高的转化率和较低的起燃温度.     

Radiation effects in the transient hot-wire technique

The transient hot-wire technique is widely used for absolute measurements of the thermal conductivity and thermal diffusivity of fluids. It is well established that fluid radiation effects significantly influence these measurements, especially those for the thermal diffusivity. Corrections for radiation effects are based on the models developed and deviations of the measured data from the ideal line source model. In this paper, the effect of fluid radiation on the measurements of the thermal conductivity of n-pentane is presented. For comparison, the influence of thermal radiation effect on measurement of transparent fluids, such as argon is also shown. The difference between the influence of natural convection and thermal radiation is also demonstrated.     

Tri-component diblock copolymers of poly(ethylene glycol)–poly(ε-caprolactone-<Emphasis Type="Italic">co</Emphasis>-lactide): synthesis,characterization and loading camptothecin

Biodegradable tri-component diblock copolymer was synthesized by bulk copolymerization of ε-caprolactone (CL) and D, L-lactide (LA) in the presence of methoxy poly(ethylene glycol) (MePEG), using stannous octoate as catalyst. Their chemical structure and physical properties were investigated by GPC, NMR, DSC, TGAand XRD. The increase of CL/LA ratio in the diblock copolymer leads to lower T _g, higher decomposition temperature and crystallinity. Nanoparticles formulated from MePEG–poly(CL-co-LA) (PCAE) possess spherical structure, which was characterized by dynamic light scattering (DLS) and transmission electron microscopy (TEM). The DLS results indicate that the particle size increased with the increase of CL/LA ratio and the hydrophobic fragment length in the copolymer. The drug encapsulation efficiency and the drug release behavior in vitro conditions of camptothecin were measured by high performance liquid chromatography (HPLC). The encapsulation efficiency can be achieved as high as 84.4% and the release behavior can be made well-controlled. MePEG–poly(CL-co-LA) nanoparticles might have a great potential as carriers for hydrophobic drugs.     

Synthetic erythropoietic proteins: tuning biological performance by site-specific polymer attachment

Chemical synthesis in combination with precision polymer modification allows the systematic exploration of the effect of protein properties, such as charge and hydrodynamic radius, on potency using defined, homogeneous conjugates. A series of polymer-modified synthetic erythropoiesis proteins were constructed that had a polypeptide chain similar to the amino acid sequence of human erythropoietin but differed significantly in the number and type of attached polymers. The analogs differed in charge from +5 to -26 at neutral pH and varied in molecular weight from 30 to 54 kDa. All were active in an in vitro cell proliferation assay. However, in vivo potency was found to be strongly dependent on overall charge and size. The trends observed in this study may serve as starting points for the construction of more potent synthetic EPO analogs in the future.     

Rb3In(H2O)Si5O13: a novel indium silicate with a CdSO4-topological-type structure

A novel indium silicate, Rb3In(H2O)Si5O13, has been synthesized using a high-temperature, high-pressure hydrothermal method and characterized by single-crystal X-ray diffraction. The structure consists of five-membered rings of corner-sharing SiO4 tetrahedra connected via corner sharing to four adjacent five-membered rings to form a 3D silicate framework that belongs to the CdSO4 topological type. The InO6 octahedron shares five of its corners with five different SiO4 tetrahedra to form a 3D frame-work that delimits two types of channels to accommodate the rubidium cations. The sixth corner of InO6 is coordinated H2O. The structure is related to that of the titanium silicate ETS-10, and these are the only two metal silicates that have the CdSO4-topological-type structure. In addition, the crystal of Rb3In(H2O)Si5O13 shows an intense second harmonic generation signal. Crystal data: H2Rb3InSi5O14, monoclinic, space group Cc (No. 9), a = 9.0697(5) A, b = 11.5456(6) A, c = 13.9266(8) A, beta = 102.300(1) degrees, V = 1424.8(1) A3, and Z = 4.     

Oxidation of nitrided si(100) by gaseous atomic and molecular oxygen

The nitridation of Si(100) by ammonia and the subsequent oxidation of the nitrided surface by both gaseous atomic and molecular oxygen was investigated under ultrahigh vacuum (UHV) conditions using X-ray photoelectron spectroscopy (XPS). Nitridation of Si(100) by the thermal decomposition of NH3 results in the formation of a subsurface nitride and a decrease in the concentration of surface dangling bond sites. On the basis of changes in the N1s spectra obtained after NH3 adsorption and decomposition, we estimate that the nitride resides about four to five layers below the vacuum-solid interface and that the concentration of surface dangling bonds after nitridation is only 59% of its value on Si(100)-(2 x 1). Oxidation of the nitrided surface is found to produce an oxide phase that remains in the outer layers of the solid and interacts only weakly with the underlying nitride for oxygen coverages up to 2.5 ML. Slight changes in the N1s spectra observed after oxidizing at 300 K are suggested to arise primarily from the introduction of strain within the nitride, and by the formation of a small amount of Si2=N-O species near the nitride-oxide interface. The nitrogen bonding environment changes negligibly after oxidizing at 800 K, which is indicative of greater phase separation at elevated surface temperature. Nitridation is also found to significantly reduce the reactivity of the Si(100) surface toward both atomic and molecular oxygen. A comparison of the oxygen uptake on the clean and nitrided surfaces shows quantitatively that the decrease in dangling bond concentration is responsible for the reduced activity of the nitrided surface toward oxidation, and therefore that dangling bonds are the initial adsorption site for both gaseous oxygen atoms and molecules. Increasing the surface temperature is found to promote the uptake of oxygen when O2 is used as the oxidant, but brings about only a small enhancement in the uptake of gaseous O-atoms. The different effects of surface temperature on the uptake of O versus O2 are interpreted in terms of the efficiency at which dangling bond pairs are regenerated on the surface at elevated temperature and the different site requirements for the adsorption of O and O2.     

‘Sacrificial’ supramolecular assembly and pressure-induced polymerization: toward sequence-defined functionalized nanothreads

Limited supramolecular strategies have been utilized to synthesize sequence-defined polymers, despite the prominence of noncovalent interactions in materials design. Herein, we illustrate the utility of ‘sacrificial’ aryl-perfluoroaryl supramolecular synthons to synthesize sp³-hybridized nanothreads from sp²-enriched reactants. Our strategy features A–B reactant pairs in the form of a phenol:pentafluorophenol co-crystal that is preorganized for an electronically-biased and sequence-defined polymerization. The polymerization, initiated at 12 GPa, affords an alternating copolymer featuring exogenous –OH functionalities. The external substitution is confirmed through IR spectroscopy. Importantly, the inclusion of the functional unit provides the first experimental glimpse at reaction mechanism: keto–enol tautomerization that can only occur during cycloaddition is observed through IR spectroscopy. Our approach realizes the first example of a functionalized nanothread and attains sequence definition through sacrificial supramolecular preorganization and presents a further approach for de novo design of complex nanothreads.

Supramolecular synthons are exploited to synthesize –OH functionalized sp³-rich sequence-defined nanothreads using pressure-induced polymerization of a phenol:pentafluorophenol co-crystal.      

Electrochemical study on the keto-enol tautomerization of p-hydroxyphenylpyruvic acid in aqueous solution

The keto-enol tautomerization of p-hydroxyphenylpyruvic acid (pHPP) in aqueous solutions and the complexation reaction between enolic pHPP and boric acid have been studied by electrochemical techniques including linear sweep voltammetry (LSV), pulse voltammetry, and cyclic voltammetry (CV), combining with UV spectrometry. Electrochemical techniques reveal that in aqueous solution, there are two tautomers of pHPP: enolic form and ketonic form; the former exists mainly in freshly prepared pHPP solution, and the latter exists mainly in equilibrium solution. Both enolic and ketonic pHPP are electroactive. The electrochemical oxidation of enolic pHPP gives rise to two anodic waves, I(a) and II(a), while the electrochemical oxidation of ketonic pHPP only results in the observation of the second wave II(a). The oxidation process I(a) is revealed to be associated with the quasi-reversible, two-electron two-proton oxidation of "C=C"group at the side chain of enolic pHPP, and the oxidation process II(a) is proposed to result from the irreversible oxidation of phenolic hydroxyl group. It is observed that in aqueous solution, enolic pHPP can quickly complex with boric acid to yield enol-borate complex that can also oxidize at a glassy carbon electrode to yield an anodic wave.     

超临界状态下炭基材料的储氢

评介了目前各种储氢方法，指出了炭基材料作为储氢材料的优势，综述了近年来纳米炭材料在储氢方面的进展，详细探讨了超临界状态下氢气在纳米孔隙中的吸附机理，并在此基础上提出了研究中的问题及进一步的研究方向。     

Determination of proteins at nanogram levels by a resonance light-scattering technique with tetra-substituted sulphonated aluminum phthalocyanine

This is the first report on the determination of proteins with tetra-substituted sulphonated aluminum phthalocyanine (AlS₄Pc) by resonance light-scattering (RLS). At pH 3.0, the weak RLS of AlS₄Pc can be enhanced by the addition of proteins. Based on this, a novel quantitative method has been developed for the determination of proteins in aqueous solutions. Under optimal conditions, the linear ranges of the calibration curves were 0.050–2.0 μg ml⁻¹ for both human serum albumin (HSA) and human r-IgG. The detection limits were 12.7 ng ml⁻¹ for HSA and 16.1 ng ml⁻¹ for human r-IgG. The method has been applied to the analysis of total protein in human serum samples collected from the hospital and the results were in good agreement with those reported by the hospital, which indicates that the method presented here is not only sensitive, simple, but also reliable and suitable for practical applications.