微乳液介质—1—（2—吡啶偶氮）—2—萘酚光度法测定汽油中环烷酸铁的含量

本研究了微乳液为介质时，铁与１－（２－吡啶偶氮）－２－萘酚（ＰＡＮ）的显色反应。选择７３０ｎｍ处为测定波长，ε为１．４×１０＾４Ｌ．ｍｏｌ＾－＾１．ｃｍ＾－＾１，铁量在０－５０μｇ／２５ｍｌ范围内符合比耳定律，该法适用于汽油中环烷酸铁的测定。     

盐酸吡哆辛及其制剂的二阶导数差示脉冲极谱法定量研究

建立盐酸吡哆辛及其制剂的二阶导数差示脉冲极谱定量分析方法。盐酸吡哆辛在0.1mol/L氢氧化钠溶液-0.1moL/L磷酸二氢钾溶液-水(体积比为1.2:8.8:990)的混合溶液中,于-0.140V(vs·Ag/AgCl)处出现一良好的二阶导数差示脉冲极谱峰,盐酸吡哆辛浓度在3.6×10~(-4)～9.6×10~(-4)mol/L范围内与其峰幅值呈显著的线性关系(P<0.01),线性相关系数r=0.9997,检出限为9.0nmol/L。     

Renewable amperometric immunosensor for complement 3 assay based on the sol-gel technique

A renewable amperometric immunosensor based on the sol-gel technique has been constructed by dispersing graphite, complement 3 (C3) antiserum, and sol-gel at low temperature. The prepared immunosensor is rigid, porous, and has a renewable external surface. A competitive binding assay has been used to determine C3 in human serum with the aid of C3 labeled with horseradish peroxidase. The enzyme-labeled antigen can readily diffuse toward the encapsulated antibody, which retains its binding properties. The experimental conditions for the assay with the biocomposite, including the loading of C3 antiserum in the biocomposite, the amount of labeled C3 in incubation solution, incubation time, and temperature, have been optimized. Using C3 labeled with horseradish peroxidase, and o-AP as the substrate, amperometric detection at -150 mV (relative to the SCE) results in a linear detection range of 1.17-35.1 microg mL(-1), with a detection limit of 0.56 microg mL(-1). Serum samples have been assayed and the results demonstrate the feasibility of the proposed immunosensor for clinical analysis. The surface of the immunosensor can be renewed simply by polishing to obtain a fresh immunocomposite ready to use in a new competitive assay.     

Effect of iron-containing catalysts on thermal decomposition of cured GAP-AP propellants

The effects of various burning rate catalysts on thermal decomposition of cured glycidyl azide polymer (GAP)-ammonium perchlorate (AP) propellants have been studied by means of thermal analysis and a modified vacuum stability test (MVST). Four types of iron-containing catalysts examined in this paper are catocene, ferrocenecarboxaldehyde (FCA), ferrocene, and ferric oxide. Results of differential thermal analysis (DTA) and thermogravimetric analysis (TG) revealed that the catalysts play an important role in the decomposition of both AP and GAP. The peak decomposition temperature (T _m) of DTA curves and onset decomposition temperature (T _o) of TG patterns considerably shifted to a lower temperature as the concentration of catalysts increased in the propellants. The endothermic temperature of AP, however, is unaffected by the presence of burning rate catalysts in all cases. The activation energy of decomposition of the propellants in range of 80 to 120°C is determined, based on the MVST results.     

High pressure Raman studies of 7,7,8,8-tetracyanoquinodimethane (TCNQ) and CuTCNQ

The high-pressure Raman studies of 7,7,8,8-tetracyanoquinodimethane (TCNQ) single crystals and polycrystalline CuTCNQ are presented in this paper. TCNQ shows a phase transition at 22 kbar, a pressure higher than reported earlier. CuTCNQ undergoes a first order phase transition at 30 kbar, which is characterized by the abrupt disappearance of all the Raman bands.     

New coordination catalysts based on rare earth compounds for polymerization of 1-octene

The study of rare earth coordination catalysts for polymerization of 1-octene has been successfully carried out for the first time. Some features and kinetic behavior of polymerization of 1-octene by Nd(naph)₃–AIEt₃ catalyst system in tetrachloro-methane are described. The overall polymerization activation energy E_a measured was 74.5 kJ/mol and the rate equation could be expressed as R_p = k_p [Nd] [M] (k_p = 3.21 × 10^?3 L/mol s, at 50°C). The catalytic activity of various rare earth elements in Ln (naph)₃ and ligands in NdL₃ for the polymerization was compared. A 1-octene oligomer with double bonds was obtained. It is either a white or pale yellow waxy semi-solid. Its number-average molecular weight is about 10³ and the molecular weight distribution is less than 2.     

β-蒎烯和马来酸酐的反应及产物表征

研究了β-蒎烯和马来酸酐的烯反应、溶剂中自由基共聚反应和本体热共聚反应,得到了β-蒎烯和马来酸酐烯反应产物和共聚产物,并用IR、1H NMR、13C NMR、GPC、DSC进行表征,研究了引发剂浓度、溶剂体系、单体配比、温度等因素对产物的影响.对聚合物进行皂化改性,测量了皂化物浓度对水表面张力的影响.     

A Novel Oxidative N-Demethylation of 12-Membered Macrolide with Lead Tetraacetate

Erythromycin has been extensively used in the treatment of bacterial infections for over 50 years1. In addition to the antimicrobial effect, the quite unique antiinflammatory activity of the erythromycin derivatives has attracted much attention as new the…     

Preparation and Characterization of Mixed‐Valent Nickel Oxide/Nickel Hexacyanoferrate Hybrid Films and Their Electrocatalytic Properties

Polynuclear mixed‐valent nickel oxide and nickel hexacyanoferrate hybrid film was prepared on glassy carbon electrode by multiple scan cyclic voltammetry. The film growth was monitored using electrochemical quartz crystal microbalance (EQCM). The cyclic voltammogram of the nickel hexacyanoferrate film is characterized by single redox couple whereas nickel oxide/nickel hexacyanoferrate hybrid film exhibits two redox couples. Cyclic voltammetric features suggest that the charge transfer process in both films resembles that of surface‐confined redox species. In stronger basic solution (pH ≥9), nickel hexacyanoferrate film was gradually converted into nickel oxide film during potentiodynamic cycling. The peak potential of nickel oxide redox couple moved into more negative side with increasing pH of contacting solution whereas the peak potential of nickel hexacyanoferrate redox couple remains the same. Electrocatalytic behavior of hybrid film coated electrodes toward ascorbic acid, hydrazine and hydroxylamine was investigated using cyclic voltammetry technique. Analytical application of nickel oxide/nickel hexacyanoferrate hybrid film electrode was tested in amperometry and flow injection analysis.     

What are the pKa values of C-H bonds in aromatic heterocyclic compounds in DMSO?

A first-principle method has been successfully developed for the prediction of pK_a values of aromatic heterocyclic compounds in DMSO solution with a precision of 1.1 pK_a units. Comparison of theoretical results and experimental data (where available) also shows excellent consistency. Armed with this useful approach, the pK_a values for a series of aromatic heterocycles were calculated in DMSO. Moreover, a discussion of the relationships between hydrogen acidities and molecular structures is conducted for the first time (determinants of C-H acidities, substituent effects, and some practical use of dehydrometalation). These statistics could be useful for synthetic chemists to design proper routes for introduction of aromatic heterocyclic moiety, especially when dehydrometalation reactions are used.