Matrix-assisted laser desorption/ionisation time-of-flight mass spectrometry. A comparison of fragmentation patterns of linear dextran obtained by in-source decay, post-source decay and collision-induced dissociation and the stability of linear and cyclic glucans studied by in-source decay

In the first part of this study fragmentation patterns from a range of dextran oligomers (containing 4-20 anhydroglucose units) were compared in three different methods of analysis coupled with matrix-assisted laser desorption/ionisation (MALDI) mass spectrometry. Collision-induced-dissociation (CID), prompt in-source decay (ISD) and post-source decay (PSD) all caused cleavage of the glycosidic bonds. Both CID and to a lesser extent ISD caused further cleavage of pyranose rings of the individual sugar residues. There was very little cleavage of pyranose rings detected in the PSD spectrum. Derivatisation of the reducing end-groups of the oligodextrans with 1-phenyl-3-methyl-5-pyrazolone (PMP) restricted cleavage in the MALDI mass spectrometer to the non-reducing end, and further it enabled the saccharides to be separated by HPLC so that a single chain length could be examined as a standard. Maltoheptaose was also used as a standard. In the second part of the study prompt ISD-MALDI mass spectrometry was used to compare the fragmentation of three oligoglucans, dextran, maltodextrin and gamma cyclodextrin, that have different linkages and different secondary structure. The results showed that the degree of fragmentation correlated with the degree of freedom in the saccharide chains in solution determined by NMR. Dextran the most random conformation was fragmented most whereas there was little evidence of any fragments, not even glycosidic bond breakage from cyclodextrin, even when the laser power was increased considerably. The fragmentation pattern of maltodextrin was intermediate. The patterns of fragmentation produced by MALDI mass spectrometry, particularly where standards are available to calibrate the spectrum and the energy of the laser is controlled, can be used to predict the type of linkage present.     

Transport of99mTc across TBP-kerosene oil supported liquid membranes

Transport of^99mTc across tri-n-butylphosphate (TBP) kerosene oil supported liquid membranes (SLM) has been studied under various conditions. Presence of dichromate ions helps avoid activity scavenging effects. Concentration increase of TBP, the complexing carrier used in the present study has a positive effect on flux (J) and permeability (P) of these ions, as up to 2.87M there is an increase in J and P values. HCl concentration in the feed solution increases J and P with their maximum values at 2.5–3.0M HCl in the feed. Above this concentration there is a decrease in flux and permeability of^99mTc(VII) ions. The given ions are stripped with LiCl or NaCl solutions but more with NaOH. The optimum conditions of transport of the given ions are 2.5M HCl concentration in the feed, 2.87M TBP concentration in the membrane and 1M NaOH concentration in the strip solution. Equations have been developed to indicate the relation between flux, J, viscosity, of TBP in organic membrane phase, temperature, T, [H⁺], in the aqueous feed solutions and Tc ion concentration in the feed solution. Based on P, the values determined from liquid membrane experiments, the quantitative flux values of Tc(VII) ions were also determined as a function of TBP concentration in the membranes, and HCl and Tc concentration in the feed solution using the given equations. This experimental technique provides quantitative results from trace level activity transfer experiments.     

A cluster of many small holes with negative imaginary surface impedances may generate a negative refraction index

We deal with the scattering of an acoustic medium modeled by an index of refraction n varying in a bounded region Ω of and equal to unity outside Ω. This region is perforated with an extremely large number of small holes D_m's of maximum radius a, a << 1, modeled by surface impedance functions. Precisely, we are in the regime described by the number of holes of the order M:=O(a^{β ? 2}), the minimum distance between the holes is d ～ a^t, and the surface impedance functions of the form λ_m～λ_m,0a^?β with β > 0 and λ_m,0 being constants and eventually complex numbers. Under some natural conditions on the parameters β,t, and λ_m,0, we characterize the equivalent medium generating approximately the same scattered waves as the original perforated acoustic medium. We give an explicit error estimate between the scattered waves generated by the perforated medium and the equivalent one, respectively, as a→0. As applications of these results, we discuss the following findings:

相似文献   

On a reaction diffusion equation with nonlinear time‐nonlocal source term

In this article, we prove the local existence of a unique solution to a nonlocal in time and space evolution equation with a time nonlocal nonlinearity of exponential growth. Moreover, under some suitable conditions on the initial data, it is shown that local solutions experience blow‐up. The time profile of the blowing‐up solutions is also presented. Copyright © 2015 John Wiley & Sons, Ltd.     

Atomically Precise Defective Copper Nanocluster Catalysts for Highly Selective C−C Cross-Coupling Reactions

Point defects in nanoparticles have long been hypothesized to play an important role in governing the particle's electronic structure and physicochemical properties. However, single point defects in material systems usually exist with other heterogeneities, obscuring the chemical role of the effects. Herein, we report the synthesis of novel atomically precise, copper hydride nanoclusters (NCs), [Cu₂₈H₁₀(C₇H₇S)₁₈(TPP)₃] ( Cu₂₈ ; TPP: triphenylphosphine; C₇H₇S: o-thiocresol) with a defined defect in the gram scale via a one-pot reduction method. The Cu₂₈ acts as a highly selective catalyst for C−C cross-couplings. The work highlights the potential of defective NCs as model systems for investigating individual defects, correlating defects with physiochemical properties, and rationally designing new nanoparticle catalysts.     

'Living cantilever arrays' for characterization of mass of single live cells in fluids

The size of a cell is a fundamental physiological property and is closely regulated by various environmental and genetic factors. Optical or confocal microscopy can be used to measure the dimensions of adherent cells, and Coulter counter or flow cytometry (forward scattering light intensity) can be used to estimate the volume of single cells in a flow. Although these methods could be used to obtain the mass of single live cells, no method suitable for directly measuring the mass of single adherent cells without detaching them from the surface is currently available. We report the design, fabrication, and testing of 'living cantilever arrays', an approach to measure the mass of single adherent live cells in fluid using silicon cantilever mass sensor. HeLa cells were injected into microfluidic channels with a linear array of functionalized silicon cantilevers and the cells were subsequently captured on the cantilevers with positive dielectrophoresis. The captured cells were then cultured on the cantilevers in a microfluidic environment and the resonant frequencies of the cantilevers were measured. The mass of a single HeLa cell was extracted from the resonance frequency shift of the cantilever and was found to be close to the mass value calculated from the cell density from the literature and the cell volume obtained from confocal microscopy. This approach can provide a new method for mass measurement of a single adherent cell in its physiological condition in a non-invasive manner, as well as optical observations of the same cell. We believe this technology would be very valuable for single cell time-course studies of adherent live cells.     

Synthesis of trisubstituted imidazoles by palladium-catalyzed cyclization of O-pentafluorobenzoylamidoximes: application to amino acid mimetics with a C-terminal imidazole

1-Benzyl-4-methylimidazoles with a range of substituents at the 2-position are prepared from O-pentafluorobenzoylamidoximes on treatment with catalytic amounts of Pd(PPh3)4 and triethylamine. The sequence provides access to optically active amino acid mimetics with a C-terminal imidazole. [structure: see text]     

Reactions of [Mn2(μ-pyS)2(CO)6] with bidentate phosphines: X-ray structure of [Mn(η2-pyS) (η2-dppp)(CO)2] [dppp = Ph2P(CH2)3PPh2, pySH = pyridine-2-thiol]

The dimeric complex [Mn₂(-pyS)₂(CO)₆] (1) reacted with 2 molar equivalents of Ph₂P(CH₂)₃PPh₂ (dppp) and Ph₂P(CH₂)₂PPh₂ (dppe) to give the respective monomeric chelate complexes [Mn(²-pyS)(²-dppp)(CO)₂] (2) and [Mn(²-pyS)(²-dppe)(CO)₂] (3). In contrast, with 2 molar equivalents of Ph₂P(CH₂)₅PPh₂ (dpppe), 1 gave the highly insoluble polymeric complex [Mn(²-pyS)(-dpppe)(CO)₂]n (4). An X-ray structure determination shows that 2 crystallizes in the monoclinic space group P2₁/n with a = 10.721(2) Å, b = 19.712(5) Å, c = 14.846(4) Å, = 109.06(2)°, V = 2965.5(14) ų, and Z = 4. The complex has a distorted octahedral geometry with the dppp ligand, one CO group and the N atom of the chelating pyS ligand occupying equatorial sites, and one CO group and the S atom of the pyS ligand lying in the axial positions.     

Reactions of [Mn2(μ-pyS)2(CO)6] (pySH=pyridine-2-thiol) with triphenylphosphine (PPh3), diphenylphosphine (PHPh2) and bis(diphenylphosphino)methane (dppm): X-ray crystal structure of [Mn(pyS)(η1-dppm)2(CO)2]

The dimeric complex [Mn₂(-pyS)₂(CO)₆] (1) reacted with 2 M equivalents of both PPh₃ and PHPh₂ to give the respective monomeric phosphine complexes [Mn(pyS)(L)(CO)₃][L = PPh₃ (2) and PHPh₂ (3)]; with 4 M equivalents of dppm, it yielded the complex [Mn(pyS)(¹-dppm)₂(CO)₂](4). An X-ray structure determination of 4 shows that it crystallizes in the monoclinic space group P2₁/n with a = 11.027(3), b = 24.984(7), c = 18.379(5) Å, = 99.870(8)°, V = 4988(2) ų, and Z = 4. The complex has an octahedral geometry with the chelating pyS ligand and two CO groups occupying the equatorial sites and the two monodentate dppm ligands lying in the trans positions.     

Chemical Constituents from the Fruits of Madhuca latifolia

From the fruit coats of the medicinal plant Madhuca latifolia were isolated three new compounds, the triterpenoid madhucic acid (=3β‐(octanoyloxy)‐11‐oxoolean‐12‐en‐28‐oic acid; 1 ), the untypical isoflavone madhushazone (=9‐methoxy‐7‐(2,3,6‐trimethoxyphenyl)‐[1,3]dioxolo[4,5‐g][1]benzopyran‐8(8H)‐one; 2 ), and a bis(isoflavone) named madhusalmone (=5,14‐dimethoxy‐3,12‐bis(3,4,5‐trimethoxyphenyl)‐1,6,8,10,15,17‐hexaoxanaphtho[2′,3′: 6,7]cyclodeca[1,2‐b]naphthalene‐4,13(4H,13H)‐dione; 3 ), as well as eight known constituents, and their structures were elucidated by spectral analysis, including 2D‐NMR techniques.