Extraction and quantitation of furanic compounds dissolved in oils

There is often a need to calculate isotopic uranium activities from total uranium mass or gamma spectrometry measurement data. This calculation is based on a model of the relationship of the²³⁴U activity to that of²³⁵U since both are enriched together in the normal gaseous diffusion enrichment process. This paper presents equations for calculating these activities that have been developed from several sources of data. These equations have been used for several characterization studies and have produced very good results when compared to results from actual isotopic uranium analyses. However, because the variability in the model causes significant uncertainty in the calculated results, alpha-spectrometry is recommended for critical applications.     

Titrimetric and spectrophotometric methods for the determination of cerium(IV) in aqueous solution

A titrimetric and spectrophotometric methods for cerium(IV) determination have worked out. The first method relies upon the treatment of cerium(IV) solution with an excessive amount of iodide; the liberated iodine is extracted into chloroform, then reduced to iodide. The latter is iodometrically determined after 6- or 36-fold amplification. The spectropho-tometric finish is based upon the reaction of the titled ion with iron(II), in the presence of hexacyanoferrate(II), to form an intense prussian blue color suitable for the trace determination of cerium(IV) ion.     

Synthesis of jasplakinolide analogues containing a novel omega-amino acid

The synthesis of the omega-amino acid 4 is described utilizing a two-dimensional synthesis strategy combined with an enzymatic differentiation of homotopic ester groups. The amino acid 4 features two non-bonded interactions that result in conformational constraints on a cyclic construct. This amino acid was incorporated into the four macrolactams 17, 22, 31, and 37. The ring in 17 and 22 is 18-membered, whereas 31 and 37 have a 19-membered ring. The pairs with the same ring size differ in a N-methyl group. For the larger macrolactams (31 and 37) conformational analysis showed that the macrocyclic rings are somewhat more rigid than in the natural lead, the depsipeptide jasplakinolide. Nevertheless, their conformations are comparable to the natural product. There are no intramolecular hydrogen bonds, neither is the cis-rotamer populated in the N-methyl compound 37. Due to the increased flexibility of the smaller macrolactams 17 and 22 and signal overlap, a distinct solution structure could not be obtained for these compounds. The amino acid 4 should be useful for restricting the conformation of other small peptides.     

Pseudoguaiane-type sesquiterpenes and inhibitors on nitric oxide production from Dichrocephala integrifolia

Three new pseudoguaiane-type sesquiterpenes, dichrocepholides A-C, and two new pseudoguaiane-type sesquiterpene dimers, dichrocepholides D and E, were isolated from the aerial part of Dichrocephala integrifolia. Their stereostructures were determined on the basis of chemical and physicochemical evidence. In addition, the extract and its principal sesquiterpene constituent, parthenin, showed an inhibitory activity on nitric oxide (NO) production and on induction of inducible NO synthase.     

Hall effects and entropy generation applications for peristaltic flow of modified hybrid nanofluid with electroosmosis phenomenon

The electroosmotic peristaltic flow of modified hybrid nanofluid in presence of entropy generation has been presented in this thermal model. The Hall impact and thermal radiation with help of nonlinear relations has also been used to modify the analysis. The assumed flow is considered due to a non-uniform trapped channel. The properties of modified hybrid nanofluid model are focused with interaction of three distinct types of nanoparticles namely copper ($Cu)$, silver ($Ag$) and aluminum oxide ($A{l}_2{O}_3).$ The mathematical modeling and significances of entropy generation and Bejan number are identified. With certain flow assumptions, the governing equations are attained for optimized peristaltic electroosmotic problem. Widely used assumptions of long wave length and low Reynolds number reduced the governing equations in ordinary differential equations. The ND solver is flowed for the solution process. The physical significant of results is observed by assigning the numerical values to parameters.     

Retention of alkali,alkaline earth and transition metals on an itaconic acid cation-exchange column. Eluent pH,ionic strength and temperature effects upon selectivity

The unusual selectivity of a methylene succinic (itaconic) acid modified polymeric column was investigated for the separation of alkali, alkaline earth, transition and heavy metals employing non-chelating inorganic eluents. The retention of selected metal ions on the column was investigated with simple HNO3 eluents and eluents prepared from KNO3 and KCl salts of varying pH (adjusted using HNO3). From these studies both the effect of eluent ionic strength and pH upon retention was evaluated for the itaconic acid stationary phase. The results obtained showed that despite slow exchange kinetics causing poor efficiencies, acceptable baseline separations of selected alkaline earth and transitions could be obtained under optimum conditions (the baseline separation of Mg(II), Ca(II), Mn(II), Cd(II), Zn(II) and Co(II) was possible using a 15 mM KNO3-5 mM KCl eluent at pH 3.50 in under 25 min). The use of an simple ionic strength step gradient was shown that facilitated the addition of Pb(II) to the above group of metal ions. An investigation into the effect of temperature upon peak efficiency and retention showed increased column temperature could be used to improve the resolution of closely eluting metal ions such as Ca(II) and Sr(II) and Ca(II) and Mn(II).     

Melt drawing as a route to high performance polyethylene

Well established routes for obtaining stiff and strong polyethylene (PE) involve solid state drawing either of solution crystallized gel films or melt crystallized spherulitic PE. The aim of this work is to show the potential of melt deformation as an alternative route for obtaining highly oriented products. Our previous work on the melt deformation route showed that oriented PE fibers could be directly extruded under appropriately controlled conditions [8,9]. Here, we show that PE films (or filaments) can also be melt drawn in the temperature window 130–160 °C, thus yielding oriented products. The advantage of melt drawing over direct melt extrusion is that it allows a wider operational latitude and thus does not require such carefully controlled conditions.The morphology produced by melt deformation is different from solid state deformation and consists of extended chain fibrils with platelet overgrowths. The relative amount of fibrils and platelets depends on operating parameters. The temperature window of PE melt drawing is identified with the regime where some flow induced crystallization takes place. The conditions for melt drawability are of wider generality for crystallizable flexible chain polymers. They are: (i) adequate strain rate to overcome entropie resistance to chain extension, (ii) but not high enough to activate the elastic response of the transient networks in the entangled system, (iii) sufficient strain to fully extend the chain, (iv) appropriate temperature for flow-induced crystallization and strain hardening, and (v) cooling to freeze the oriented structure.Ultra high molecular weight PEs were not the most suitable for melt drawing due to their high recoverable elongation in the melt (melt elasticity) in addition to added limitations imposed by their nascent grain systeme. Our work suggests that an optimum molecular weight for melt drawing is¯M _w(400–900)×10³ with further possibilities for improvement through multimodal distributions.     

Flow-injection spectrophotometric determination of chloramben

Abstract

A method for the dechlorination of PCB mixtures (Aroclor formulations) to biphenyl was extended to soils. The contaminated sample was mixed with magnesium flakes, potassium hexachloropalladiate (K₂PdCl₆), propan-2-ol and water then permitted to react for up to six hours. Biphenyl, recovered by extraction into hexane, was quantified by gas chromatography with flame ionization detection. The reaction was very efficient in propan-2-ol / water (～95%), surfactant emulsion or sand mixture and virtually complete in soil provided that excess magnesium (2 g) and the K₂PdCl₆ were added to the sample prior to the addition of water. Higher PCB loadings were readily determined in field contaminated soils either by direct determination within the matrix or by standard additions. However, analyte concentrations were appreciably over-estimated in Soxhlet or sonication extracts of a certified reference material that contained sub-ppm levels of analyte. The over-estimation is considered to result from the conversion in part of natural organic matter to biphenyl.     

Spectroscopic and morphological study of laser ablated Titanium

The optical characteristics of biological tissues sampled from the anterior abdominal wall of laboratory rats are for the first time experimentally studied in a wide wavelength range (350-2500 nm). The experiments have been performed in vitro using a LAMBDA 950 (PerkinElmer, United States) spectrophotometer. Inverse Monte Carlo simulation is used to restore the spectral dependences for scattering and absorption coefficients, as well as the scattering anisotropy factor for biological tissue based on the recorded spectra of diffuse reflection and total and collimated transmissions.