Electrophoretic separation of DNA using a new matrix in uncoated capillaries

A new separation matrix, consisting of polymer poly(N-isopropylacrylamide) (PNIPAM) and small molecule additive mannitol, was used for double-stranded (ds) DNA and plasmid DNA separation by capillary electrophoresis. The matrix had a low viscosity, which made it very easy to handle. The additive mannitol dramatically enhanced the sieving performance of PNIPAM in TBE buffer. The optimal mannitol concentration 6% in polymer solution, was determined with the consideration of both speed and resolution. A resolution of 0.95 was achieved on the separation of 271/281 bp in the phiX174/HaeIII digest by using 1.5% PNIPAM + 6% mannitol, while the supercoiled, linear and nicked conformers of lambda plasmid were separated in 1% PNIPAM + 6% mannitol, demonstrating the potential use of this new matrix for effective DNA separations. The dramatic impact of mannitol on sieving performance of PNIPAM solution was investigated. pH dependent self-coating ability of PNIPAM was revealed. The presence of mannitol in TBE buffer decreased the pH of the buffer, which led to more efficient self-coating ability of PNIPAM probable due to the formation of hydrogen bonds between PNIPAM molecules and silanol groups at the silica wall.     

Asymmetric Synthesis Using Sulfinimines (N-Sulfinyl Imines)

Abstract

Sulfinimine-derived polyfunctionalized chiral building blocks, often prepared in one pot, provide efficient access, with a minimum of chemical manipulation, to enantiopure, multifunctional amine derivatives including piperidines and pyrrolidines.     

Asymmetric Synthesis XIV: TiCl(Oipr)3-Promoted Asymmetric Coupling Reaction of D-Camphor Ketimine Anion

Optically active 1, 2-Diphenylethylendiamine(9) is obtained by asymmetric oxidative coupling reaction of d-camphor ketimine anion (4). Among various oxidating agents, TiCl(Oipr)₃ is better than l₂, Br₂, CuCl₂, FeCl₃ and BrCH₂CH₂Br.     

Selective and Sequential Re‐Assembly of Patterned Block Copolymer Thin Film for Fabricating Polymeric,Inorganic, and Their Composite Nanostructured Arrays

We report that the nanostructures of poly(styrene‐block‐4‐vinylpyridine) block copolymer (PS‐b‐P4VP) thin film on a wafer substrate can be re‐assembled by sequential vapor treatment using selected solvents. Metal or other inorganic nanoparticles that were randomly pre‐loaded inside or on the surface of PS‐b‐P4VP thin film could be pulled to the rim of PS and P4VP along with the movements of PS and P4VP blocks during the treatment. As a result, the patterned polymeric or inorganic/polymer composite nanoisland and nanoring arrays were fabricated.

     

Structure and wettability relationship of coelectrospun poly (L‐lactic acid)/gelatin composite fibrous mats

Coelectrospun polylactide(PLA)/gelatin (GE) composite fibrous matrixes have been identified to exhibit much improved performances compared to the respective components; however, the reasons for their water contact angles decreasing to zero at proper PLA/GE ratios remain unclear. To get a deep understanding of the phenomenon, PLA and GE were coelectrospun with different PLA/GE ratios in this study. Although the resulting composite fibers were homogeneous in appearance, they were detected different microscopic structures by transmission electron mircroscope (TEM) and via morphological observations after selective removal of either PLA or GE component. Together with the results of degradation study in phosphate buffered solution, a kind of cocontinuous phase separation microstructure could be identified for the PLA(50 wt%)/GE(50 wt%) composite fibers, which also showed the water contact angle of 0°. This value was far lower than those of electrospun PLA (～123°) and GE (～42°) fibrous matrixes. The X‐ray photoelectron spectrometry (XPS) data revealed that the polar side groups of protein macromolecules have moved toward composite fiber surface with solvent evaporation during electrospinning, due to the hydrophobic interaction between PLA and GE. Then the excellent hydrophilicity of PLA(50 wt%)/GE(50 wt%) composite fibers could be suggested as the consequence of: (1) the cocontinuous phase separation structure could provide more interface and void for water molecules penetrating; and (2) the accumulation of polar groups on composite fiber surface significantly increased the surface wettability. Copyright © 2010 John Wiley & Sons, Ltd.     

Low band gap copolymers consisting of porphyrins,thiophenes, and 2,1,3‐benzothiadiazole moieties for bulk heterojunction solar cells

Two novel low band gap conjugated copolymers containing porphyrins, thiophenes, and 2,1,3‐benzothiadiazole ( BTZ ) moieties were synthesized and applied in bulk heterojunction solar cells. The thermal, optical, electrochemical, and photovoltaic properties of the two copolymers were examined to investigate the effect of the introduction of BTZ moiety in the backbone of the porphyrin polymers. The copolymers exhibited good thermal stability and film‐forming ability. The absorption spectra indicated that the BTZ moiety has significant influence on the UV–visible region spectra of the copolymers: with increasing the molar amount of BTZ moieties in conjugated main chain, the absorption in the range of 450–700 nm is largely broadened and red‐shifted compared to the similar polymers without BTZ moiety, and the optical band gaps of copolymers were narrowed to ～1.50 eV. The photoluminescence spectra showed that there is effective charge transfer in the whole conjugated main chain. Cyclic voltammetry displayed that the band gaps were reduced effectively by the introduction of the BTZ moieties. The bulk heterojunction solar cells were fabricated based on the blend of the copolymers and [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester (PC₆₁BM) in a 1:2 weight ratio. The maximum power conversion efficiency of 0.91% was obtained by using P2 as the electron donor under the illumination of AM 1.5, 100 mW/cm². © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Convenient Synthesis of 3,5‐Biscarbamoyl‐pyridine Derivatives

An efficient and convenient method for synthesis of 3,5‐bis‐carbamoyl‐2,6‐dimethylpyridine derivatives was achieved in good to excellent yields by reaction of anilines with 3,5‐bis(3′,5′‐dimethyl‐1′‐pyrazolyl‐carbonyl)‐2,6‐dimethylpyridine, in which pyrazoles served as leaving groups. The structures of products were confirmed by spectra data and microanalysis.     

Phase transformation and negative thermal expansion in TaVO5

Two phase transformations of TaVO(5) were observed by DSC and/or dilatometry measurements in the studied temperature range. X-ray diffraction and neutron powder diffraction structure refinements indicated a phase transformation at -14 °C from a monoclinic symmetry with space group P2(1)/c to an orthorhombic symmetry with space group Pnma above this temperature. The rigid TaO(6) octahedron in orthorhombic phase becomes nonregular at -14 °C, which results in the transition from Pnma to P2(1)/c. TaVO(5) was found to be a negative thermal expansion material above room temperature. The calculated volumetric thermal expansion coefficients (TECs) are -8.92 × 10(-6) °C(-1) in the range of 20-600 °C, and -2.19 × 10(-5) °C(-1) above 600 °C, respectively. The negative thermal expansion behavior is accounted for by the tilt of the TaO(6) and VO(4) polyhedra, where the shrinkage of the VO(4) tetrahedra result in the increase of Ta-O-V angles on heating, while the angle of Ta-O1-Ta maintains at 180° in the framework.