Highly sensitive bend sensor with hybrid long-period and tilted fiber Bragg grating

We demonstrate a new type of fiber optic bend sensor with a hybrid structure made up of a long period grating (LPG) and a tilted fiber Bragg grating (TFBG). The sensing mechanism is based on the spectrum of power transfers between the core and cladding modes from a TFBG located downstream from a LPG. We show that the curvature of a beam can be determined by the reflected power difference between the core mode and the recoupled cladding modes. We further provide design rules for the LPG and TFBG to optimize and linearize the sensor response. In addition, the temperature cross-sensitivities of this configuration are also investigated for two different types of fiber.     

The epoxy-siloxane/Al composite coatings with low infrared emissivity for high temperature applications

Low infrared emissivity coatings with good thermal resistance were prepared by using epoxy-siloxane and aluminum as adhesive and pigment, respectively. The influence of chemical composition, surface texture, roughness and thickness on the infrared emissivity was systematically investigated. The detailed results of experimental investigation indicate that the cured composite coatings could possess low emissivity value. Due to reducing infrared absorption and forming uniform and compact char construction, the infrared emissivity decreases obviously. Both the surface roughness and thickness have a critical value, respectively. Too large roughness or thickness would not contribute to the decrease of the emissivity. Moreover, the composite coatings were tested for thermal stability in air to explore the effect of high-temperature environment on the emissivity. The results indicate that the composite coatings, still possessing low emissivity after the test, exhibit favorable thermal ageing and thermal shock resistance.     

Graded index broadband antireflection coating prepared by glancing angle deposition for a high-power laser system

This paper reports that SiO₂ is selected to fabricate broadband antireflection (AR) coatings on fused silica substrate by using glancing angle deposition and physical vapour deposition. Through accurate control of the graded index of the SiO₂ layer, transmittance of the graded broadband AR coating can achieve an average value of 98% across a spectral range of 300--1850~nm. Moreover, a laser-induced damage threshold measurement of the fabricated AR coating is performed by using a one-on-one protocol according to ISO11254-1, resulting in an average damage threshold of 17.2~J/cm$^{2}$.     

Synthesis and Properties of a Novel FRET-Based Ratiometric Fluorescent Sensor for Cu<Superscript>2+</Superscript>

A novel FRET-based probe LS3 was designed and synthesized. As expected, it exhibited high selectivity and sensitivity for detecting Cu²⁺ over other commonly coexistent metal ions. The detection limit was measured to be 0.0423 μM for Cu²⁺, which can meet the selective requirements for practical application. In addition, the newly synthesized compound 3a/b have potential value of further synthesizing more analogous FRET-based probes.     

基于渥拉斯顿棱镜的单路实时偏振成像系统设计

针对非实时成像中动态场景偏振探测产生的虚假偏振信息问题,充分利用渥拉斯顿棱镜的分光特性,设计了一种新型实时偏振成像系统.采用像方远心望远透镜系统、准直透镜系统并设计匹配的成像镜系统,在单探测器阵列上同时获取偏振态相互垂直的两幅偏振图像.通过全系统联动设计与优化,系统的调制传递函数在截止频率处不小于0.55,全系统弥散斑均方根半径小于5.3μm,即小于探测器像元尺寸,满足成像设计要求.仿真结果证明该成像系统可有效解决传统分振幅偏振成像系统的实时性差的不足,分孔径偏振成像系统的能量利用率和分辨率低的问题以及偏振焦平面方法中光路串扰的缺陷,应用前景广阔.     

Influence of core property on multi-electron process in slow collisions of isocharged sequence ions with neon

Influence of core property on multi-electron process in the collisions of q=6-9 and 11 isocharged sequence ions with Ne is investigated in the keV/u region.The cross-section ratios of double-,triple-,quadruple-and total multi-electron processes to the single electron capture process as well as the partial ratios of different reaction channels to the relevant multi-electron process are measured by using position-sensitive and time-of-flight techniques.The experimental data are compared with the theoretical predictions including the extended classical over-barrier model,the molecular Columbic barrier model and the semi-empirical scaling law.Results show a core effect on multi-electron process of isocharge ions colliding with Neon,which is consistent with the results of Helium we obtained previously.     

单晶Cu(001)薄膜塑性变形的分子动力学模拟

使用分子动力学方法,模拟研究了单晶Cu(001)薄膜在双向等轴拉伸应变下的塑性变形行为.当应变超过一定值时,样品通过产生位错、层错及孪晶而发生塑性变形.当应变相对较低时,不全位错首先在薄膜表面形核并在密排面上滑移,留下堆积层错;当应变增加时,位错在表面与内部同时成核生长,层错数量也随之增加.分析了相邻滑移面上的位错之间相互作用形成孪晶的微观过程.材料内部形成大量堆积层错及孪晶后,较大孪晶的密排面上的原子也会发生滑移,形成孪晶内部的层错结构以释放残余应力.     

交叉色关联噪声驱动的单模激光系统统计性质研究

采用交叉色关联的加性色噪声和乘性色噪声驱动的单模激光立方模型,通过诺维科夫理论和福克斯近似以及斯特拉托诺维奇近似,得到反映激光统计性质的强度关联函数C的表达式;研究关联时间τ、净增益系数a₀和交叉关联强度λ对强度关联函数C的影响.数值模拟发现,在阈值以上（a₀>0）时,关联函数C随关联时间τ的增大而增大;在阈值以下（a₀<0）时,关联函数C随关联时间τ的增大而减小.无论在阈值以上还是阈值以下,关联函数C均随交叉关联强度λ的增大而减小.在C-a₀曲线上存在单峰. 关键词： 单模激光 交叉关联 强度涨落 强度关联函数     

金属Al表面熔化各向异性的分子动力学模拟

采用嵌入原子势,使用分子动力学方法对金属Al不同低指数晶面的表面熔化现象分别进行了模拟.分析了熔化过程中样品结构组态的变化.模拟结果表明对于不同的自由表面,表面熔化呈现出明显的各向异性行为.Al（110）面在低于熔点的温度之下发生预熔化;（111）与（001）面都出现过热现象.与（111）面不同,（001）面发生过热现象时表面原子层为类液层,而（111）面仍然保持很好的晶格结构,即预熔化的Al（001）面在高于熔点的温度下,仍可以在很长的时间内处于相对稳定的亚稳态.由模拟得到Al的热力学熔点为950 K左右,与实验值基本符合. 关键词： 分子动力学 表面熔化 过热     

Role of interference between localized and propagating surface waves on the extraordinary optical transmission through a subwavelength-aperture array

We report in this Letter that when radiation is incident on a metal surface perforated with an array of ring-shaped subwavelength apertures, the phase difference between the propagating surface Bloch wave and the localized surface wave can be tailored by the geometrical parameters of the array so as to affect the shape of the transmission spectrum. Above the resonant frequency of the aperture, interference between the two kinds of surface waves leads to a minimum in the transmission spectrum, whereas below it, the interference leads to a maximum. We suggest that this feature provides flexibility in engineering surface-wave-based all-optical devices.