Hollow fiber supported ionic liquid membrane microextraction for determination of sulfonamides in environmental water samples by high-performance liquid chromatography

By using ionic liquid as membrane liquid and tri-n-octylphosphine oxide (TOPO) as additive, hollow fiber supported liquid phase microextraction (HF-LPME) was developed for the determination of five sulfonamides in environmental water samples by high-performance liquid chromatography with ultraviolet detection The extraction solvent and the parameters affecting the extraction enrichment factor such as the type and amount of carrier, pH and volume ratio of donor phase and acceptor phase, extraction time, salt-out effect and matrix effect were optimized. Under the optimal extraction conditions (organic liquid membrane phase: [C₈MIM][PF₆] with 14% TOPO (w/v); donor phase: 4 mL, pH 4.5 KH₂PO₄ with 2 M Na₂SO₄; acceptor phase: 25 μL, pH 13 NaOH; extraction time: 8 h), low detection limits (0.1–0.4 μg/L, RSD ≤ 5%) and good linear range (1–2000 ng/mL, R² ≥ 0.999) were obtained for all the analytes. The presence of humic acid (0–25 mg/L dissolved organic carbon) and bovine serum albumin (0–100 μg/mL) had no significant effect on the extraction efficiency. Good spike recoveries over the range of 82.2–103.2% were obtained when applying the proposed method on five real environmental water samples. These results indicated that this present method was very sensitive and reliable with good repeatabilities and excellent clean-up in water samples. The proposed method confirmed hollow fiber supported ionic liquid membrane based LPME to be robust to monitoring trace levels of sulfadiazine, sulfamerazine, sulfamethazine, sulfadimethoxine and sulfamethoxazole in aqueous samples.     

Two chain compounds of [M(N3)2(HCOO)][(CH3)2NH2] (M = Fe and Co) with a mixed azido/formato bridge displaying metamagnetic behavior

Two new magnetic chain compounds, where the anionic [M(N3)2(HCOO)-]n chains with a 3-fold bridge of two end-on azido and one syn-syn formato ligands are isolated by the cations of [(CH3)2NH2]+, exhibit metamagnetism because of the strong intrachain ferromagnetic coupling versus the weak interchain antiferromagnetic coupling.     

Increasing structure dimensionality of copper(I) complexes by varying the flexible thioether ligand geometry and counteranions

This work focuses on the systematic investigation of the influences of pyrimidine-based thioether ligand geometries and counteranions on the overall molecular architectures. A N-containing heterocyclic dithioether ligand 2,6-bis(2-pyrimidinesulfanylmethyl)pyridine (L1) and three structurally related isomeric bis(2-pyrimidinesulfanylmethyl)benzene (L2-L4) ligands have been prepared. On the basis of the self-assembly of CuX (X = I, Br, Cl, SCN, or CN) and the four structurally related flexible dithioether ligands, we have synthesized and characterized 10 new metal-organic entities, Cu4(L1)2I4 1, Cu4(L1)2Br4 2, [Cu2(L2)2I2.CH3CN]n 3, [Cu(L3)I]n 4, [Cu(L3)Br]n 5, [Cu(L3)CN]n 6, [Cu(L4)CN]n 7, [Cu2(L4)I2]n 8, [Cu2(L4)(SCN)2]n 9, and [[Cu6I5(L4)3](BF4).H2O]n 10, by elemental analyses, IR spectroscopy, and X-ray crystallography. Single-crystal X-ray analyses show that the 10 Cu(I) complexes possess an increasing dimensionality from 0D (1 and 2) to 1D (3-5) to 2D (6-9) to 3D (10), which indicates that the ligand geometry takes an essential role in the framework formation of the Cu(I) complexes. The influence of counteranions and pi-pi weak interactions on the formation and dimensionality of these coordination polymers has also been explored. In addition, the photoluminescence properties of Cu(I) coordination polymers 4-10 in the solid state have been studied.     

Reaction mechanisms and kinetics for the oxidations of dimethyl sulfide, dimethyl disulfide, and methyl mercaptan by the nitrate radical

This study examines the initial oxidation routes of the three major reduced sulfur compounds (CH(3)SH, CH(3)SCH(3), and CH(3)SSCH(3)) by the nitrate radical using density functional and ab initio methods. Stationary points along each reaction pathway are examined using different levels of theory and basis sets to ensure the convergence of the results. Kinetics calculations follow on the determined reaction pathways to obtain the rate constants. This study shows that sulfur compounds exhibit a general trend of hydrogen abstraction following the formation of an initial sulfur-nitrate complex. The results are in agreement with experimental work on CH(3)SCH(3) and CH(3)SH, while refuting a proposal of several previous studies that oxygen addition is the dominant oxidation pathway in the case of CH(3)SSCH(3). The rate constants obtained from kinetics calculations are consistent with experimental findings and exhibit negative temperature dependence. Overall, this study confirms the importance of nitrate in the oxidation of reduced sulfur compounds in the atmosphere.     

A triptycene-based bis(crown ether) host: complexation with both paraquat derivatives and dibenzylammonium salts

[reaction: see text] A novel triptycene-based bis(crown ether) host (1) incorporating two dibenzo-24-crown-8 ether moieties has been synthesized. It can form not only a new bis[2]pseudorotaxane with dibenzylammonium salts but also stable clip-shaped complexes with paraquat derivatives. Moreover, the complexation process between 1 and the two classes of guests can be chemically controlled.     

溴化锌-季(鎓)三溴盐催化二氧化碳和环氧化合物偶联反应

研究了溴化锌-季鎓三溴盐催化二氧化碳和环氧化合物偶联反应,考察了反应温度、压力和不同金属盐对反应的影响以及催化剂的循环使用性能.结果表明,在413 K和1.0 MPa条件下,以溴化锌为催化剂,苯基三甲基三溴化铵为共催化剂,无需加入任何溶剂就可以使二氧化碳和环氧化合物发生偶联反应,并以很高的收率得到环碳酸酯.     

稀土改性L沸石在烃类催化裂化催化剂中的应用

采用离子交换的方法制备了一系列复合稀土（含La及Ce）质量分数不同的稀土改性超稳L沸石（RE-USL）,以RE USL沸石替代质量分数为5%的REUSY作为催化裂化催化剂的活性组分,用标准轻油微反活性试验（MAT）评价了其催化性能,并同单一稀土元素改性USL沸石进行了对比。结果表明,一定量的复合稀土改性USL沸石的催化性能优于单一稀土（La或Ce）改性的USL沸石,在催化裂化催化剂中加入稀土改性USL沸石,可以降低汽油产品的烯烃质量分数;可以提高汽油的辛烷值。当复合稀土在RE USL沸石中的质量分数为0.4%左右时, 与不加稀土改性USL沸石催化剂相比较,催化剂的活性指数MAT提高3.6个单位,烯烃质量分数降低1.57个单位,研究法辛烷值（RON）提高2.08个单位,产品分布更合理。     

钽离子掺杂对LiFePO4 / C物理和电化学性能的影响

采用PAM(聚丙烯酰胺)模板-溶胶凝胶法在惰性气氛下合成钽掺杂的LiFePO₄/C复合正极材料，考察了钽对目标化合物的物理和电化学性能的影响。研究结果表明，0.33C的电流下充放电时，掺杂前后第2个循环的放电容量分别为138.6 mAh·g^-1和155.5 mAh·g^-1，循环20次后容量为141 mAh·g^-1和156 mAh·g^-1。电化学交流阻抗表明，掺杂后的材料阻抗R_ct从180 Ω减小到120 Ω。振实密度比掺杂前提高0.312 g·cm^-3。     

重费米子化合物LiV2 O4电子结构的第一性原理研究

用第一性原理的FP-LMTO能带计算方法研究了重费米子化合物LiV2O4的电子结构.结果表明:费米面附近的导带是由V原子的3d电子形成的宽度为2.5eV的窄能带,是3d态在立方晶体场中具有t2g对称性的子带;它与O的2p轨道构成的能带有近1.9eV的能隙.计算得出的费米能处电子态密度和线性电子比热系数分别是11.1 states/eV f.u.和26.7 mJ/molK2.费米面处的能带色散具有电子型和空穴型两种,呈现出一种复杂的费米面结构.LSDA以及LDA+GGA计算表明, LiV2O4有一个磁矩为每个钒原子1.13μB,总能比LDA基态低约148 meV/f.u.的铁磁性基态.由目前的能带结构计算的结果无法确定这一类Kondo体系的局域磁矩的来源,表明这一化合物中的重费米子行为可能有别于在含有4f和5f稀土的重费米子合金中观察到的局域磁矩与传导电子的交换作用机制,其中存在量子相变的可能.     

三维含时量子散射研究H+ClH体系

用三维含时量子散射理论模拟了H+GlH体系在BW2,mBW2,G3势能面上的动力学行为.其计算结果表明,振动量子态对反应几率影响很大;势能面的地形对转动量子态如何影响反应几率起重要作用;反应几率表现出"黄金规则".此外,BW2,mBW2势能面上的反应几率几乎相同,而G3势能面上的反应几率较前者低,大概由于G3的势垒高的缘故.