基于形态学4子带分解金字塔的图像融合

提出了一种基于数学形态学滤波的多分辨力图像融合。这种融合方法使用了形态学开闭运算构造了低通与高通滤波器,将原始图像分解为4子带图像金字塔和4子带方向衬比度图像金字塔。然后利用方向衬比度和区域标准差进行图像融合得到融合的4子带图像金字塔,最后应用子带图像重构得到融合图像。融合实验表明,该方法优于传统的形态学金字塔图像融合,衬比度金字塔图像融合和小波分解图像融合。     

弯曲增敏型光纤曲率传感器机理的研究

近年国外出现一种直接检测弯曲的低成本光纤曲率传感器,采用弯曲增敏技术提高光纤对弯曲的灵敏度。这种传感器的线性范围宽,能区分正向弯曲和负向弯曲,在测量较大弯曲变形的场合更具优势;并且适合埋入结构内部检测,通过转换还可测量轴向应变。然而其传感机理方面的研究仍处于探索阶段。通过分析光辐射度余弦定律理论、回音壁光线理论、沟槽角度理论等国内外对该传感器机理的研究成果,并基于平面波导的光散射损耗理论,提出了光纤曲率传感器的机理。指出弯曲引起光纤敏感区表面散射损耗的改变是导致光传输损耗改变的原因;推导出损耗与光纤弯曲半径、表面特性、光纤结构参量关系的数学模型,并通过实验验证了模型的有效性。     

On locating low altitude moving targets using a planar acoustic sensor array

It is of engineering importance to locate low altitude moving targets with acoustic methods due to the blindness of the traditional radar detecting. In this paper, an algorithm for locating low altitude moving targets is put forward based on a five-element planar acoustic sensor array. The method is realized through estimations of the sensor-to-sensor time delays of the source signal generated by the low altitude moving target. The angle and range estimation performance of the proposed method are analyzed, respectively, both in theoretical and numerical sense.     

1000V可调脉动直流电源设计

本文将自耦调压器与升压变压器相结合，设计出了一种1000V可调脉动直流电源，构思独特，可广泛应用于可调高压大功率电源的设计。     

Surface free energies of electroless Ni–P based composite coatings

Surface free energy of a solid surface gives a direct measure of intermolecular interactions at interfaces and has a strong influence on adsorption and adhesion behaviour. However few data are available for the surface free energies of electroless Ni–P based composition coatings. In this paper, the electroless Ni–P, Ni–P-surfactant, Ni–Cu–P, Ni–P–PTFE and Ni–Cu–P–PTFE composite coatings were prepared under various coating conditions. The chemical compositions, surface morphology and thickness of the coatings were measured using an energy dispersive X-ray microanalysis (EDX), a scanning electron microscope (SEM) and a digital micrometer respectively. The contact angles of water, diiodomethane and ethylene glycol on the coatings were measured automatically using dataphysics OCA-20 contact angle analyser. The surface free energy of the coatings and their components (e.g. dispersion, polar or acid/base portions) were calculated using various methods. The experimental results showed that the incorporation of surfactant or PTFE particles into Ni–P matrixes has a significant influence on the surface free energy of the coatings, while the incorporation of copper into Ni–P matrixes has no significant influence on the surface free energy of the coatings.     

An approach to achieve lateral superresolution for small probe confocal measurement system and its element

A shaped annular beam superresolution approach is proposed to improve a lateral resolution of a small probe laser confocal measurement system (LCMS). The approach proposed enables lateral superresolution measurement of LCMS to be achieved by using a binary optical diffractive element to shape a He–Ne Gaussian laser beam into an annular beam with an inner diameter of 0.87 mm and an outer diameter of 1.8 mm required for superresolution measurement, and shift the beam spatial frequency from low to high. And a binary optical element (BOE) with 16 phase levels is designed and fabricated to shape a Gaussian laser beam into an annular beam. Preliminary experimental results indicate that an intensity distribution of a shaped annular beam is in agreement with simulation results, the diffractive efficiency is 87.2%; LCMS lateral and axial resolutions of 0.2 μm and 3 nm are achieved, respectively, and its measurement range is expanded nearly to double, when BOE is used in LCMS and , NA=0.85.     

Growth and optical properties of In:Nd:LiNbO3 crystals

In, Nd double-doped LiNbO₃ (LN) crystals have been grown for the first time. Their infrared (IR) transmission spectra were measured and discussed to investigate their structure and defects. The optical damage resistance of Nd:In:LiNbO₃ crystals were characterized by straightly observing transmission facula distortion method. The optical damage resistance of In (4.0 mol%):Nd:LiNbO₃ was much higher than that of Nd:LiNbO₃. The defects were discussed in this paper to explain the optical damage resistance in the In:Nd:LiNbO₃ crystals.     

甚高频等离子体增强化学气相沉积制备微晶硅太阳电池的研究

采用甚高频等离子体增强化学气相沉积技术成功地制备了不同硅烷浓度和辉光功率条件下的微晶硅电池.电池的J-V测试结果表明：在实验的硅烷浓度和功率范围内，随硅烷浓度的降低和功率的加大，对应电池的开路电压逐渐变小；硅烷浓度的不同对电池的短路电流密 度有很大的影响，但功率的影响在实验研究的范围内不是很显著.对于微晶硅电池，N层最好 是非晶硅，这是因为一方面可以降低对电流的横向收集效应，另一方面也降低了电池的漏电概率，提高了电池的填充因子. 关键词： 微晶硅太阳电池 甚高频等离子体增强化学气相沉积     

水催化脱卤反应:构建每次一个水分子的纳米化学反应体系(英文)

pacc:8240,8760E Acombinedexperimentalandtheoretical studyofthephotochemistryofCHBr3inpurewa terandinacetonitrile/watermixedsolventsisre portedthatelucidatesthereactionsandmecha nismsresponsibleforthephotochemicalconver sionofthehalogenatomsinCHBr3intothre…     

基于MEMS技术的多媒体空中鼠标

本文采用MEMS加速度传感技术,触控技术以及无线射频的多功能鼠标的电路设计方案,首先系统通过三轴陀螺仪和三轴加速度计的数据进行实时采集,将采集到的数据传送给STM32微控制器,用于计算鼠标的位移、角度、角速度等参数,并利用无线模块将数据发送到接收端,再通过USB协议发送到电脑端。针对现有空中无线鼠标通信距离、电池供电等问题的限制,本文采用通信距离更长的2.4GHZ无线电波,可循环充电利用的锂电池替代传统电池供电,并且利用USB设备通信,在接收端将大容量存储设备与鼠标设备整合复用,可实现二者之间的任意切换,提高了该鼠标系统适应实际应用环境的能力。