Conductometric studies and application of new Schiff base ligand as carbon paste electrode modifier for mercury and cadmium determination

A new chemically modified carbon paste electrode by 2,2?-((pyridine-2,6-diylbis(azanylylidene))bis(methanylylidene))diphenol (L) ligand has been made and used as a sensor for determination of trace mercury and cadmium ions with cyclic voltammetry (CV) and differential pulse voltammetry (DPV) methods. Complexation studies of the ligand with Cu²⁺, Zn²⁺, Hg²⁺, Ni²⁺ and Cd²⁺ ions by conductometric method in acetonitrile–ethanol mixture at 25°C show that the ML complexes have formed. The formation constants of complexes were calculated from the computer fitting of the molar conductance–mole ratio data, and the stability of the resulting complexes varied in order of Cd²⁺ > Hg²⁺ > Cu²⁺ > Zn²⁺ > Ni²⁺. Then a simple and effective chemically modified carbon paste electrode with L was prepared, and the electrochemical properties and applications of the modified electrode were investigated. Under the optimal conditions, the detection limit was 0.0494 μg L^?1 and 0.0782 μg L^?1 for cadmium and mercury ions, respectively, and the linear range for both metal ions were from 1 to 100 μg L^?1. The electrode shows high sensitivity, reproducibility and low cost, and was successfully applied to determination of Cd²⁺ and Hg²⁺ ions in water samples with recovery in the range of 97–101%.     

Coating failure in the pull-out of a multiply-coated optical fiber

For fiber optic ribbon cables, stripping of the multiple coatings from the optical fiber glass is an important step in installation. During this process, failures that lead to excess residue on the fiber create extra work that is costly. In this paper, we describe a systematic experimental approach to understanding the failure mechanism observed during fiber optic ribbon stripping. The blades in the ribbon-stripping tool create compressive stresses during the fiber pull-out process. These compressive stresses, in turn, may lead to coating instability. The coating instability creates potential for stress risers and excessive wear of the innermost coating. Reducing the length of the stripping sample has been found to significantly reduce the occurrence of this failure mode.     

Single step conversion of UO2 and U3U8 into uranyl sulphate solution

A direct and simple method for the conversion of UO₂ and U₃O₈ powder into uranyl sulphate solution is described, eliminating many tedious chemical steps. UO₂ and U₃O₈ are not soluble in concentrated or dilute sulphuric acid, as uranium in lower oxidation state does not react with sulphuric acid. However, nitric acid oxidizes uranium from lower valency to higher valency state, i.e., tetravalent to the hexavalent uranyl ion in solution. Sufficient amount of sulphuric acid present in the reaction mixture makes it possible for uranyl ions, formed by oxidation of nitric acid, to react with sulphuric acid forming uranyl sulphate.     

Measurement of radon concentration and assessment of associated cancer risk in some fertilizer warehouses in the Punjab province of Pakistan

Radon concentration was measured by using ³⁹CR track etched detectors in five fertilizer warehouses in the Punjab province of Pakistan. The average concentration of radon was determined to be 20–88 Bq m⁻³. Annual effective dose (AED) and excess lifetime cancer risk (ELCR) have also been assessed using the models of UNSCEAR and ICRP. The corresponding annual dose and ELCR to the workers of warehouses have been estimated to be 0.30–1.02 mSv year⁻¹ and 0.44–1.02%, respectively.

     

有机分子三重激发态的调控与应用

对近期有机分子三重激发态调控的研究进展进行了总结评述。控制分子的三重激发态性质,可以制备多种具有新颖性质的分子,如用于可激活光动力治疗(PDT)的光敏剂、磷光分子探针与生物标识试剂,以及可控的三重态湮灭上转换等。但目前对三重态控制方面的研究相对较少,其中的规律也很不明确。近期有文献陆续报道了使用超分子方法和共价修饰法进行的三重态调控,利用的光物理过程有单重态能量转移、三重态能量转移、电子转移等等。现有研究结果表明,三重态的调控规律与单重态的调控规律有所不同,例如:发色团的单重激发态(荧光)往往可以被光诱导电子转移(PET)所猝灭,但是在多个例子中已发现,相同发色团的三重态并不能被PET所猝灭。本文总结的研究结果及所作的分析,将对该领域的分子结构设计及后续研究起到一定的促进作用。     

Synthesis and ethylene polymerization of 8‐(fluorenylarylimino)‐5,6,7‐trihydroquinolylnickel chlorides: Tailoring polyethylenes by adjusting fluorenyl position and adduct Et2Zn

A series of 8‐(arylimino)‐5,6,7‐trihydroquinolines ligand pendant fluorenyl group at N‐aryl ring, and their nickel complexes ( Ni1 ? Ni5 ) have been prepared and characterized. Once activated with Et₂AlCl, the complexes Ni1 , Ni2 , and Ni3 bearing ligands from para‐fluorenylaniline produced unimodal polyethylenes; on the contrary complexes Ni4 and Ni5 gave bimodal polyethylenes due to steric influence of ligands from ortho‐fluorenyl anilines. With a increment of Et₂Zn/ Ni4 ratio from 0 to 400, the distinct bimodel polyethylenes were obtained with molecular weights shifted from 14.3 to 57.6 kg·mol^?1; apart shiftment to higher molecular weights, the portion of low molecular weight decreased along with higher portion of high molecular weight. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 1910–1919     

Judiciously balancing steric and electronic influences on 2,3‐diiminobutane‐based Pd(II) complexes in nourishing polyethylene properties

A new series of palladium complexes ( Pd1–Pd5 ) ligated by symmetrical 2,3‐diiminobutane derivatives, 2,3‐bis[2,6‐bis{bis(4‐FC₆H₄)₂CH}₂‐4‐(alkyl)C₆H₂N]C₄H₆ (alkyl = Me L1 , Et L2 , ⁱ Pr L3 , ^t Bu L4 ) and 2,3‐bis[2,6‐bis{bis(C₆H₅)₂CH}₂‐4‐{(CH₃)₃C}C₆H₂N]C₄H₆ L5 , have been prepared and well characterized, and their catalytic scope toward ethylene polymerization have been investigated. Upon activation with MAO, all palladium complexes ( Pd1–Pd5) exhibited good activities (up to 1.44 × 10⁶ g (PE) mol^?1(Pd) h^?1) and produced higher molecular weight polyethylene in the range of 10⁵ g mol^?1 with precise molecular weight distribution (M _w/M _n = 1.37–1.77). One of the long‐standing limiting features of the Brookhart type α‐diimine Pd(II) catalysts is that they produce highly branched (ca. 100/1000 C atoms) and totally amorphous polymer. Conversely, herein Pd5 produced polymers having dramatically lower branching number (28/1000) as well as improved melting temperature up to 73.1 °C showing well‐controlled linear architecture, and very similar to polyethylene materials generated by early‐transition‐metal based catalysts. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 3214–3222     

Metal Trimethylsilylthiolates for the Synthesis of Trinuclear MnPd2 Complexes

The manganese(II)‐palladium(II)‐sulfide complex [MnCl₂(μ₃‐S)₂Pd₂(dppp)₂] ( 2 ) was prepared from the reaction of [PdCl₂(dppp)] with [Li(N,N'‐tmeda)]₂[Mn(SSiMe₃)₄] ( 2 ) in a 2:1 ratio under mild conditions. The new trimethylsilylthiolate complex [Pd(dppp)(SSiMe₃)₂] ( 3 ) was synthesized from the reaction of [Pd(dppp)(OAc)₂] with two equivalents of Li[SSiMe₃]; this was then used in a reaction with [Mn(CH₃CN)₂(OTf)₂] to form the manganese(II)‐palladium(II)‐sulfide cluster [Mn(OTf)(thf)₂(μ₃‐S)₂Pd₂(dppp)₂]OTf ( 4 ).     

Classification,Toxicity and Bioactivity of Natural Diterpenoid Alkaloids

Diterpenoid alkaloids are natural compounds having complex structural features with many stereo-centres originating from the amination of natural tetracyclic diterpenes and produced primarily from plants in the Aconitum, Delphinium, Consolida genera. Corals, Xenia, Okinawan/Clavularia, Alcyonacea (soft corals) and marine sponges are rich sources of diterpenoids, despite the difficulty to access them and the lack of availability. Researchers have long been concerned with the potential beneficial or harmful effects of diterpenoid alkaloids due to their structural complexity, which accounts for their use as pharmaceuticals as well as their lousy reputation as toxic substances. Compounds belonging to this unique and fascinating family of natural products exhibit a broad spectrum of biological activities. Some of these compounds are on the list of clinical drugs, while others act as incredibly potent neurotoxins. Despite numerous attempts to prepare synthetic products, this review only introduces the natural diterpenoid alkaloids, describing ‘compounds’ structures and classifications and their toxicity and bioactivity. The purpose of the review is to highlight some existing relationships between the presence of substituents in the structure of such molecules and their recognised bioactivity.     

Recent Advances in Inorganic Nanomaterials Synthesis Using Sonochemistry: A Comprehensive Review on Iron Oxide,Gold and Iron Oxide Coated Gold Nanoparticles

Sonochemistry uses ultrasound to improve or modify chemical reactions. Sonochemistry occurs when the ultrasound causes chemical effects on the reaction system, such as the formation of free radicals, that intensify the reaction. Many studies have investigated the synthesis of nanomaterials by the sonochemical method, but there is still very limited information on the detailed characterization of these physicochemical and morphological nanoparticles. In this comprehensive review, recent advances in the sonochemical synthesis of nanomaterials based on iron oxide nanoparticles (Fe₃O₄NP), gold nanoparticles (AuNP) and iron oxide-coated gold nanoparticles (Fe₃O₄@Au NP) are discussed. These materials are the most studied materials for various applications, such as medical and commercial uses. This review will: (1) address the simple processing and observations on the principles of sonochemistry as a starting point for understanding the fundamental mechanisms, (2) summarize and review the most relevant publications and (3) describe the typical shape of the products provided in sonochemistry. All in all, this review’s main outcome will provide a comprehensive overview of the available literature knowledge that promotes and encourages future sonochemical work.