Random vortex-street model for a self-similar plane turbulent jet

We ask what determines the (small) angle of turbulent jets. To answer this question we first construct a deterministic vortex-street model representing the large-scale structure in a self-similar plane turbulent jet. Without adjustable parameters the model reproduces the mean velocity profiles and the transverse positions of the large-scale structures, including their mean sweeping velocities, in a quantitative agreement with experiments. Nevertheless, the exact self-similar arrangement of the vortices (or any other deterministic model) necessarily leads to a collapse of the jet angle. The observed (small) angle results from a competition between vortex sweeping tending to strongly collapse the jet and randomness in the vortex structure, with the latter resulting in a weak spreading of the jet.     

Predicting the Mechanical Properties of Binary Blends of Immiscible Polymers

We couple a morphological study of an immiscible binary AB mixture with a micromechanical simulation to determine how the spatial distribution of the A and B domains and the interfacial region (interphase) affects the mechanical behavior of the blend. The morphological studies are conducted through a three-dimensional Cahn-Hilliard (CH) simulation. Through the CH calculations, we obtain the size and structure of the domains for different blend compositions. The output of the CH model serves as the input to the Lattice Spring Model (LSM), which consists of a three-dimensional network of springs. In particular, the location of the different phases is mapped onto the LSM lattice and the appropriate force constants are assigned to the LSM sites. A stress is applied to the LSM lattice and we calculate the elastic response of the material. We find that the local stress and strain fields are highly dependent on the morphology of the system. By integrating the morphological and mechanical models, we can isolate how modifications in the composition of the mixture affect the macroscopic behavior. Thus, we can establish how choices made in the components affect the ultimate performance of the material.     

Design and electro-optical characterization of Si-based resonant cavity light emitting devices at 850 nm

We report on the fabrication and characterization of Si/SiO₂ Fabry-Perot microcavities. These structures are used to enhance the external quantum efficiency along the cavity axis and the spectral purity of emission from silicon rich oxide films that are used as active media to fabricate a Si based RCLED (resonant cavity light emitting devices). A new structure to electrically pump the active media in the resonant cavity has been designed. These structures are fabricated by chemical vapour deposition on a silicon substrate. The microcavities are tuned at 850 nm and present a quality factor ranging from 17 to 150 depending on the number of pairs constituting the dielectric mirrors. An enhancement of the electro and photoluminescence (PL) signal of 20 times is achieved for the selected emission wavelength. These cavities are characterized by TEM analysis to evaluate film uniformity, thicknesses and the densification after annealing processes for temperature ranging from 800 to 1100 °C. The electrical properties of the active media are analyzed. The electroluminescence spectral features are compared with PL spectra correlated with the quality factor of the cavities. The photometric diagram shows also a high directionality of the emitted light within a 30° cone from the sample normal.     

Comparison of three techniques for cryopreservation and reestablishment of long-term Gentiana tibetica suspension culture

Cryogenic storage of cell suspensions allows long-term maintenance of cultures. The main purpose of the study was to develop a successful cryogenic protocol for 10-year-old embryogenic cell suspensions of G. tibetica. We examined three techniques of freezing: (I) controlled-rate cooling with various cryoprotectants (0.1-0.5 M DMSO, 0.5-1.0 M sucrose, 0.5-1.0 M glycerol, 0.25-1.0 M proline) or preculture with 0.4 M sorbitol and cryoprotectants (0.065-0.1 M DMSO, 0.2-0.8 M proline), (II) vitrification (PVS2) and (III) encapsulation. Cell viability was assessed by the TTC test and biomass increase. After controlled-rate cooling the majority of cells were lethally damaged, with only 3% viability observed. Vitrification and encapsulation approaches were more effective, assuring high levels of post-thaw viability ca. 85% and 7%, respectively. The encapsulation procedure gave faster recovery of the culture suspension than did vitrification, and ensured culture homogeneity and embryogenic competence.     

Pulsed laser treatment of gold and black gold thin films fabricated by thermal evaporation

The effect of pulsed laser treatment of metal, and metal blacks, was studied. Gold and black gold thin films were fabricated by thermal evaporation of gold in a vacuum and nitrogen atmosphere respectively. Black gold films were grown in a nitrogen atmosphere at pressures of 200 Pa and 300 Pa. UV pulsed laser radiation (λ = 266 nm, τ = 4 ns), with fluence ranging from 1 mJ·cm⁻² to 250 mJ·cm⁻² was used for the film treatment in a vacuum and nitrogen atmosphere. The nitrogen pressure was varied up to 100 kPa. Surface structure modifications were analyzed by optical microscopy, atomic force microscopy (AFM) and scanning electron microscopy (SEM). Energy dispersive X-ray spectroscopy (EDX) was used for chemical characterization of the samples. A significant dependence of the film optical and structural properties on laser treatment conditions (laser fluence, ambient pressure and number of applied pulses) was found. The threshold for observable damage and initiation of changes of morphology for gold and black gold surfaces was determined. Distinct modifications were observed for fluences greater than 106 mJ·cm⁻² and 3.5 mJ·cm⁻² for the gold and black gold films respectively. Absorbtivity of the black gold film is found to decrease with an increase in the number of laser pulses. Microstructural and nanostructural modifications after laser treatment of the black gold film were observed. EDX analysis revealed that no impurities were introduced into the samples during both the deposition and laser treatment.