Low-voltage closed loop MEMS actuators

An efficient electrostatic resonator is designed by adding a low voltage controller to an electrostatic actuator. The closed loop actuator shows stable, and bi-sable behaviors with bounded chaotic oscillations as large as 117% of the capacitor gap. The controller voltage is decreased from a previously designed resonator to less than 9?V thereby reducing the load on the controller circuit components. Bifurcation diagrams are obtained showing the frequency and magnitude of AC voltage required for chaotic oscillations to develop. The information entropy, a measure of chaotic characteristic, is calculated for the micro-resonator and is found to be 0.732.     

TiO2 nanoparticles as an effective catalyst for the synthesis of hexahydro-2-quinolinecarboxylic acids derivatives

The one-pot three-component reaction of arylmethylidenepyruvic acids,1,3-cyclohexandiones and ammonium acetate provides an economical and efficient synthetic route to 5-oxo-4-aryl-l,4,5,6,7,8-hexahydro-2-quinolinecarboxylic acid 4 under solvent-free conditions using a catalytic amount of TiO₂ nanoparticles（TiO₂ NPs） as an effective heterogeneous catalyst.     

有氧条件下聚(氯乙烯)负载Pd(Ⅱ)配合物高效催化Heck和无铜Sonogashira反应(英文)

A novel poly(vinyl chloride)-supported Pd complex was found to be a highly active catalyst for the Heck and Sonogashira reactions of aryl halides under aerobic conditions.The complex is thermally stable,and can be easily recovered and reused.The catalyst was recycled for the Heck and Sonogashira reactions for five runs without appreciable loss of its catalytic activity,and with negligible metal leaching.     

Synthesis,characterization and antioxidant activities of highly functionalized cyclopentadienes catalyzed by ZnO-nanorod as economic and efficient heterogeneous nano catalyst

A three-component condensation was applied for the preparation of cyclopentadiene derivatives through the reaction of primary amines, alkyl propiolate and dialkyl acetylenedicarboxylate in the presence of catalytic amount of ZnO-nanorods (Zn-NR) under solvent-free conditions at 50℃. The method has proved to be synthetically green, simple, and effective with high atom economy and yield. The catalyst also revealed significant reusability. Moreover, the antioxidant activity and free radical scavenging capacity of the newly synthesized derivatives 4a, 4b, 4c, and 4d was screened using free radical scavenging 2,2-diphenyl-1-picrylhydrazyl (DPPH) and ferric reducing antioxidant power (FRAP) assays and compared with hydroxytoluene (BHT) and tert-butylhydroquinone (TBHQ). These compounds do not exhibit good DPPH radical scavenging, but they have a desirable FRAP.     

Quantum Mechanical Study of Substituent Dependence on the Structure,Spectroscopic (13C, 1H NMR and UV), NBO,Hyperpolarizability and HOMO?LUMO Analysis of Ru(NHC)2Cl2(CH‐p‐C6H4X) Complexes

In this work, we have explored the structural, electronic properties, ¹³C and ¹H NMR parameters and first hyperpolarizability of Ru(NHC)₂Cl₂(CH‐p‐C₆H₄X) complexes (XH, F, Cl, Me, NH₂, OH, CN, NO₂, CHO, COOH) by mpw1pw91 quantum method. The X‐substituent effect on structural parameters, frontier orbital energies, spectroscopic (¹H and ¹³C NMR, UV) of complex was carried out. The results indicate that the substituent has played a significant role on the structures and properties of complex. ¹H and ¹³C NMR chemical shifts were calculated by using the gauge‐invariant atomic orbital (GIAO) method. Total and partial density of state (TDOS and PDOS) and also overlap population density of state (OPDOS) diagrams analysis were exhibited. In analyzing the bonding characteristics of this structure, Ru‐C_carbene and Ru‐C_NHC bonds were identified and characterized in details by Natural bond orbital (NBO) analysis.     

Diammonium hydrogen phosphate as a versatile and efficient catalyst for the one-pot synthesis of pyrano[2,3-<Emphasis Type="Italic">d</Emphasis>]pyrimidinone derivatives in aqueous media

Diammonium hydrogen phosphate, (NH(4))(2)HPO(4), was used as a catalyst for one-pot, three-component condensation reactions consisting of aromatic aldehydes, malononitrile and barbituric/thiobarbituric acid in aqueous ethanol at room temperature. This method has the advantages of a simple operation, mild reaction conditions, high yields, by using a less toxic and low cost chemical as a catalyst.     

Effect of biopolymer blends on physical and Acoustical properties of biocomposite foams

Bio‐based foams are the solution to environmental concerns raised by petrochemical‐based open cell foams used in various industries for sound absorption. While conventional petrochemical‐based polymers take centuries to degrade or may not degrade at all, bio‐based polymers decompose to biomass, water, and carbon dioxide in a matter of months when exposed to proper environment. To increase the potential of replacing current petrochemical foams, mechanical as well as acoustic characteristics of bio‐based foams need to be improved. This article studies the effect of blending two bio‐based polymers and physics of the blends on acoustic and mechanical properties of resulting polymer composite foams. Different blends of polylactide with three grades of polyhydroxyalkanoates were foamed and characterized based on acoustic and mechanical performance. Rheological properties of pure polymers as well as their blends were studied and effect of polymer blends on acoustic absorption of the resulting foams was investigated. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 1002–1013     

Rapid and mild synthesis of quinazolinones and chromeno[d]pyrimidinones using nanocrystalline copper(I) iodide under solvent-free conditions

This paper describes a very simple, efficient synthesis of quinazolinones and chromeno[d]pyrimidinones from the reaction of aryl aldehydes, urea/thiourea and active methylene compounds(dimedone/4-hydroxycoumarin) using nano-sized CuI particles under solvent-free conditions. The highlights of this new method are based on using an effective and recyclable catalyst, affording high yields of products, mild reaction conditions, facile work-up and purification.     

Preparation and properties of aromatic polyesters and copolyesters containing phenylindane unit

Aromatic polysters and copolyesters of high molecular weights with phenylindane units were prepared from combinations of 3-(4-hydroxyphenyl)-1,1,3-trimethyl-5-indanol and bisphenol A with isophthaloyl and terephthaloyl chloride by two-phase polycondensation in a nitrobenzene-water system with various phase-transfer catalysts. The phenylindane-containing polyesters and copolyesters were amorphous and readily soluble in a wide range of solvents that included chloroform, m-cresol, tetrahydrofuran, and dimethylformamide. The glass transition temperatures of the phenylindane-derived polyisophthalate and polyterephthalate were 235 and 253°C, respectively, which were higher than those of the corresponding bisphenol A analogs by some 50°C. These polymers began to lose weight around 400°C in air and nitrogen atmospheres.     

Synthesis and Dynamic NMR Spectroscopic Study of Dialkyl 4-Ethoxy-1-(1-naphthyl)-5-oxo-4,5-dihydro-1<Emphasis Type="Italic">H</Emphasis>-pyrrole-2,3-dicarboxylates

Summary. Protonation of the reactive 1:1 intermediate produced in the reaction between triphenylphosphine and dialkyl acetylenedicarboxylates with ethyl 2-(1-naphthylamino)-2-oxoacetate, leads to a vinylphosphonium salt, which undergoes intramolecular Wittig reaction to produce dialkyl 4-ethoxy-1-(1-naphthyl)-5-oxo-4,5-dihydro-1H-pyrrole-2,3-dicarboxylates in excellent yields. A dynamic NMR effect is observed in the ¹H NMR spectra of the title compounds as a result of restricted rotation around the single bond linking the naphthalene moiety and the heterocyclic system, which is attributed to the peri interaction between the pyrrole residue and the peri CH group. The free energy of activation (G ) for this process is 58±2kJmol^–1.Received December 6, 2002; accepted December 11, 2002 Published online June 12, 2003