Selbstorganisation von Chinodimethanen über kovalente Bindungen,Mitteilung III,Untersuchungen zur Herstellung von Nanostrukturen

Self‐Assembly of Quinodimethanes through Covalent Bonds. Part III. Investigations on the Preparation of Nanostructures As part of our studies on the tetramerization of quinodimethane 1 to the macrocyclic compound 2 , the influence of substituents on this reaction was investigated. It was found that a large range of substituents such as 2‐phenylethyl, 2‐(4‐methoxyphenyl)ethyl, 2‐(4‐fluorophenyl)ethyl, 2‐[4‐(tert‐butyl)phenyl]ethyl, and 2‐[4‐(2‐phenylethyl)phenyl]ethyl, attached at positions 2 and 7 of 9H‐fluorene, do not prevent the tetramerization. The key step in the formation of the macrocylic compounds 13a – e is the debromination of 12a – e with mercury to the corresponding quinodimethanes which undergo a self‐assembly forming 13a – e in high yields. To study the conjugative influence of substituents on tetramerization, the effect of the hex‐1‐ynyl groups at positions 3 and 6 of the 9H‐fluorene rings was investigated. In this case, the corresponding macrocycle 17 was generated by the reaction of diol 16a with SnCl₂. Although the expected tetramerization to 17 occurred, the yield was lower than in the case of 13a – e , due to the sensitivity of the product.     

Selbstorganisation von Molekülen über kovalente Bindungen: Selektive Tetramerisierung eines p-Chinodimethans

Self-Organization of Molecules by Covalent Bonds: Selective Tetramerization of a p -Quinodimethane A simple and efficient synthesis of paracyclophane derivatives based on self-organization of a quinodimethane is described. Treatment of dibromides 5a – d with mercury afforded in high yield the macrocyclic compounds 6a – d . Interestingly, these compounds change the color on grinding and heating, from colorless to violet. The structure of 6a – d was determined by spectroscopic analyses. Single-crystal structure analysis of 6b and 6c confirmed the proposed structure.     

Preparation and properties of polyimides and polyamide-imides from diisocyanates

Polyimides of different structures were synthesized by reaction of 1,4-phenylene diisocyanate (PPDI) and 1,5-naphthalene diisocyanate (NDI) with pyromellitic dianhydride (PMDA) and 3,3′,4,4′-benzophenonetetracarboxylic dianhydride (BTDA). Polyamide-imides were also prepared by reaction of PPDI and NDI with trimellitic anhydride. The optimized condition for polymerization reactions were obtained via the study of model compounds. All polymers and model compounds were characterized by conventional methods. Physical properties of polymers, including thermal behavior, thermal stability, solution viscosity, and solubility behavior, were also studied. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2245–2250, 1999     

Cold fiber solid-phase microextraction device based on thermoelectric cooling of metal fiber

A new cold fiber solid-phase microextraction device was designed and constructed based on thermoelectric cooling. A three-stage thermoelectric cooler (TEC) was used for cooling a copper rod coated with a poly(dimethylsiloxane) (PDMS) hollow fiber, which served as the solid-phase microextraction (SPME) fiber. The copper rod was mounted on a commercial SPME plunger and exposed to the cold surface of the TEC, which was enclosed in a small aluminum box. A heat sink and a fan were used to dissipate the generated heat at the hot side of the TEC. By applying an appropriate dc voltage to the TEC, the upper part of the copper rod, which was in contact to the cold side of the TEC, was cooled and the hollow fiber reached a lower temperature through heat transfer. A thermocouple was embedded in the cold side of the TEC for indirect measurement of the fiber temperature. The device was applied in quantitative analysis of off-flavors in a rice sample. Hexanal, nonanal, and undecanal were chosen as three off-flavors in rice. They were identified according to their retention times and analyzed by GC-flame ionization detection instrument. Headspace extraction conditions (i.e., temperature and time) were optimized. Standard addition calibration graphs were obtained at the optimized conditions and the concentrations of the three analytes were calculated. The concentration of hexanal was also measured using a conventional solvent extraction method (697+/-143ng/g) which was comparable to that obtained from the cold fiber SPME method (644+/-8). Moreover, the cold fiber SPME resulted in better reproducibility and shorter analysis time. Cold fiber SPME with TEC device can also be used as a portable device for field sampling.     

Spectrophotometric study of interaction and solubilization of procaine hydrochloride in micellar systems

The interaction of Procaine hydrochloride (PC) with cationic, anionic and non-ionic surfactants; cetyltrimethylammonium bromide (CTAB), sodium dodecyl sulfate (SDS) and triton X-100, were investigated. The effect of ionic and non-ionic micelles on solubilization of Procaine in aqueous micellar solution of SDS, CTAB and triton X-100 were studied at pH 6.8 and 29°C using absorption spectrophotometry. By using pseudo-phase model, the partition coefficient between the bulk water and micelles, K_x, was calculated. The results showed that the micelles of CTAB enhanced the solubility of Procaine higher than SDS micelles (K_x = 96 and 166 for SDS and CTAB micelles, respectively) but triton X-100 did not enhanced the solubility of drug because of weak interaction with Procaine. From the resulting binding constant for Procaine-ionic surfactants interactions (K_b = 175 and 128 for SDS and CTAB surfactants, respectively), it was concluded that both electrostatic and hydrophobic interactions affect the interaction of surfactants with cationic procaine. Electrostatic interactions have a great role in the binding and consequently distribution of Procaine in micelle/water phases. These interactions for anionic surfactant (SDS) are higher than for cationic surfactant (CTAB). Gibbs free energy of binding and distribution of procaine between the bulk water and studied surfactant micelles were calculated.      

Solving a full fuzzy linear programming using lexicography method and fuzzy approximate solution

This paper discusses full fuzzy linear programming (FFLP) problems of which all parameters and variable are triangular fuzzy numbers. We use the concept of the symmetric triangular fuzzy number and introduce an approach to defuzzify a general fuzzy quantity. For such a problem, first, the fuzzy triangular number is approximated to its nearest symmetric triangular number, with the assumption that all decision variables are symmetric triangular. An optimal solution to the above-mentioned problem is a symmetric fuzzy solution. Every FLP models turned into two crisp complex linear problems; first a problem is designed in which the center objective value will be calculated and since the center of a fuzzy number is preferred to (its) margin. With a special ranking on fuzzy numbers, the FFLP transform to multi objective linear programming (MOLP) where all variables and parameters are crisp.     

New cold-fiber headspace solid-phase microextraction device for quantitative extraction of polycyclic aromatic hydrocarbons in sediment

A new automated headspace solid-phase microextraction (HS-SPME) sampling device was developed, with the capability of heating the sample matrix and simultaneously cooling the fiber coating. The device was evaluated for the quantitative extraction of polycyclic aromatic hydrocarbons (PAHs) from solid matrices. The proposed device improves the efficiency of the release of analytes from the matrix, facilitates the mass transfer into the headspace and significantly increases the partition coefficients of the analytes, by creating a temperature gap between the cold-fiber (CF) coating and the hot headspace. The reliability and applicability of previously reported cold-fiber devices are significantly enhanced by this improvement. In addition, it can be easily adopted for full automation of extraction, enrichment and introduction of different samples using commercially available autosampling devices. Sand samples spiked with PAHs were used as solid matrices and the effect of different experimental parameters were studied, including the extraction temperature, extraction time, moisture content, and the effect of sonication and modifier under optimal experimental conditions, linear calibration curves were obtained in the range of 0.0009-1000 ng/g, with regression coefficients higher than 0.99 and detection limits that ranged from 0.3 to 3 pg/g. Reproducible, precise and high throughput extraction, monitoring and quantification of PAHs were achieved with the automated cold-fiber headspace solid-phase microextraction (CF-HS-SPME) device coupled to GC-flame ionization detection. Determination of PAHs in certified reference sediments using the proposed approach exhibited acceptable agreement with the standard values.     

Microbubble-enhanced hemorrhage control using high intensity focused ultrasound

Our objective was to investigate whether hemorrhage control can be achieved faster when high-intensity focused ultrasound (HIFU) is applied in the presence of ultrasound contrast agents (UCA) as compared to HIFU only application. Incisions (3 cm long and 0.5 cm deep) were produced in the livers of anesthetized rabbits. UCA Optison (0.18 ml/kg) was injected into the mesenteric vein. A HIFU applicator (5.5 MHz, 6800 W/cm² in situ) was scanned at a rate of 1–2 mm/s in one direction over the incision (with multiple passes if needed), until hemostasis was achieved. Hemostasis times were 59 ± 23 s (n = 21) in the presence of Optison and 70 ± 23 s (n = 29) without Optison. The presence of Optison produced on average 37% reduction in hemostasis times normalized to initial bleeding rates (p < 0.05), as well as 60% faster formation of the coagulum seal over the incision (p < 0.05). Gross and histological observations showed similar appearance of HIFU lesions produced in the presence of Optison and HIFU lesions produced without Optison. Our results suggest potential utility of UCA for increasing efficiency of HIFU-induced hemostasis of solid organ injuries.     

Mapping Multiple Components of the Residual Stress Tensor in a Large P91 Steel Pipe Girth Weld Using a Single Contour Cut

The contour method is applied in an innovative manner to measure the distribution of hoop residual stress in a large martensitic-ferritic steel pipe containing a multi-pass girth weld. First, a novel one-step wire electro-discharge machining cut is conducted to divide the pipe lengthways into two halves. The deformation of the cut halves is then measured and analysed in a way that simultaneously gives maps of hoop stress across the wall thickness on both sides of the pipe and automatically accounts for through-thickness hoop bending effects and how they may vary along the pipe. Finally the contour method results are combined with X-ray diffraction residual stress measurements using the principle of superposition to determine the distribution of the axial and radial residual stresses in the pipe. It is thereby demonstrated how the distribution of three direct components of the residual stress tensor in a welded pipe can be readily determined using a “hybrid” contour measurement approach.     

Ultra-compact all-optical phase-controlled NAND,OR, XOR,XNOR, and NOT multi-function logic gate

Optical and Quantum Electronics - A theoretical analysis of the modulational instability (MI) in a nonlinear oppositely directional coupler with one channel fabricated from nonlinear medium having...