Novel poly(amide-imide)s from 2,6-bis(5-amino-1-naphthoxy) pyridine

Reaction of 5-amino-1-naphthol with 2,6-dichloropyridine resulted in preparation of 2,6-bis(5-amino-1-naphthoxy) pyridine (AN). This pyridine-based ether diamine was reacted with two moles of trimellitic anhydride (TMA) to synthesize related diimide-diacid (DIDA). Direct polycondensation reaction of DIDA with different diamines in the presence of triphenyl phosphite (TPP) afforded seven different poly(amide-imide)s. All the polymers were characterized and their physical and thermal properties were studied. The inherent viscosity of the polymers was about 0.44-0.50 dl g⁻¹ and they showed high thermal stability.     

Novel thermally stable polyimides based on flexible diamine: synthesis, characterization, and properties

A novel diamine with built-in sulfone, ether, and amide structure was prepared via three-step reactions. Nucleophilic reaction of 4-aminophenol with 4-nitrobenzoyl chloride in the presence of propylene oxide led to preparation of N-(4-hydroxy phenyl)-4-nitrobenzamide (HPNB). The nitro group of this compound was reduced with hydrazine and Pd/C to afford 4-amino-N-(4-hydroxy phenyl)benzamide (AHPB). Two moles of AHPB were reacted with bis-(4-chloro phenyl)sulfone to provide a novel sulfone ether amide diamine (SEAD). All the prepared compounds were characterized by common spectroscopic methods. The prepared diamine (SEAD) used to prepare related polyimides by reaction with different aromatic dianhydrides. The obtained poly(sulfone ether amide imide)s were characterized and their properties were studied.     

Cerium Polyoxometalate as a Reusable Catalyst for Acetylation and Formylation of Alcohols

Summary. Efficient esterification of primary and sterically-hindered secondary or tertiary alcohols with acetic anhydride was achieved in the presence of ammonium decatungestocerate(IV) icosahydrate, (NH₄)₈[CeW₁₀O₃₆]·20H₂O, as catalyst in high yields. Primary and secondary alcohols were also converted to their corresponding acetates and formates with acetic acid and ethyl formate in the presence of this catalyst. Easy work-up, non-toxicity, reusability, and stability of the catalyst are noteworthy advantages of this method.     

Electron-deficient [Ti(salophen)(OTf)2]: A new and highly efficient catalyst for the acetylation of alcohols and phenols with acetic anhydride

In the present work, a highly efficient method for acetylation of alcohols and phenols with acetic anhydride catalyzed by high-valent [Ti^IV(salophen)(OTf)₂] is reported. Under these conditions, primary, secondary and tertiary alcohols as well as phenols were acetylated with short reaction times and high yields. The catalyst was reused several times without loss of its catalytic activity.     

Electron‐deficient vanadium(IV) tetraphenylporphyrin: A new,highly efficient and reusable catalyst for chemoselective trimethylsilylation of alcohols and phenols with hexamethyldisilazane

In the present work, the application of electron‐deficient tetraphenylporphyrinatovanadium(IV) trifluoromethanesulfonate, [V^IV(TPP)(OTf)₂], in the trimethylsilylation of alcohols and phenols with hexamethydisilazane (HMDS) is reported. This new V(IV) catalyst was used as an efficient catalyst for silylation of not only primary alcohols but also sterically hindered secondary and tertiary alcohols with HMDS. Trimethylsilylation of phenols with HMDS was also performed to afford the desired Trimethylsilyl ethers (TMS) ethers. The chemoselectivity of this method was also investigated. This catalyst can be reused several times without loss of its activity. Copyright © 2011 John Wiley & Sons, Ltd.     

Polystyrene-bound electron-deficient tin(IV) porphyrin: A new, highly efficient, robust and reusable catalyst for acetylation of alcohols and phenols with acetic anhydride

In the present work, tetrakis(p-aminophenyl)porphyrinatotin(IV) trifluoromethanesulfonate, [Sn^IV(TNH₂PP)(OTf)₂], supported on chloromethylated polystyrene was prepared and characterized by elemental analysis, FT IR and diffuse reflectance UV-Vis spectroscopic methods. This new heterogenized catalyst was used for acetylation of alcohols and phenols with acetic anhydride in short reaction times and high yields. The catalyst is of high reusability and stability in the acetylation reactions and was recovered several times without loss of its initial activity and catalyst leaching.     

Developing electrodeposition techniques for preconcentration of ultra-traces of Ni, Cr and Pb prior to arc-atomic emission spectrometry determination

Electrodeposition is known to be proper for separation and preconcentration of extremely low concentrations of analytes from the bulk sample which is instrumentally very simple. In the present research, a combination of electrodeposition with arc atomic emission spectrometry (ED-AAES) method has been developed in order to improve the analytical performance of this spectrometry technique. The results show that sensitivity and detection limits by using ED-AAES were improved 1000–2000 folds over those of normal arc atomic emission spectrometry in determination of the selected elements. The detection limits for measurement of Ni, Cr and Pb were 2.56, 3.05 and 2.11 µg L^{− 1} for monodeposition and 3.31, 3.72 and 3.25 µg L^{− 1} for simultaneously deposition, respectively. The precision of determination was in the range of 2–4% RSD. Typical calibration graphs for these elements were linear up to 100 µg L^{− 1}, depending on the element and matrix.Application of this technique was also tested on determination of the studied elements in an electroplating plant's waste water. The accuracy of technique was verified by comparing the results of the waste water analysis with those of electrothermal atomic absorption spectroscopy as a reference standard method.The obtained results show that the combined technique (ED-AAES) has been progressed substantially toward the ultimate goal of direct interference-free determination of trace analysis in complex samples by AAES.     

Ab initio study of atropisomers of derivatives of 1,8-di-pyridine 9H-fluorene, dibenzo[b,d]furan, 9H-carbazole and dibenzo[b,d]thiophene

Ab initio calculation at HF/6-31G^* and MP2/6-31G^* levels of theory for geometry optimization of some syn- and anti-1,8-di-pyridine 9H-fluorene, dibenzo[b,d]furan, 9H-carbazole and Dibenzo[b,d]thiophene are reported. The rotational barrier energy, heat of formation and Gibbs energy are determined for the conversion of the anti-(syn) to the syn (anti)-isomers at 25 °C in the gas phase. The models are chosen as isomers of 9H-fluorene, dibenzo[b,d]furan, 9H-carbazole and dibenzo[b,d]thiophene as scaffold with pyridine as module. Results obtained show that (at equilibrium) for most of atropisomers the syn- is favored over the anti-isomer. Moreover, the ground state structures show that the modules are not parallel to each other but are tilted away in order to increase separation and there by minimize electrostatic repulsion. In atropisomers of 9H-carbazole the isomers are showing an attraction due to the presence of nitrogen atom. Influence of the position of nitrogen atom on the magnitude of the rotational barriers in these atropisomers is also studied.     

Synthesis,Characterization and Physicomechanical Properties of Novel Water-based Biodegradable Polyurethane Dispersion

Novel water-based biodegradable polyurethane dispersions with an aim to develop environmentally friendly materials, including medicine, various industries, have been prepared in this study. Biodegradable ionic polyurethanes (IPU) were synthesized based on polyols from renewable resources, such as castor oil (CO), in the presence of a polyester polyol and polyethylene glycol (PEG) with hydrophilic property and 1,6-hexamethylene diisocyanate. 1,4-Butanediol and dibutyltin dilaurate, were used as a chain extender and catalyst, respectively. The comprehensive investigations of the structure and properties of five types of synthesized polyurethanes demonstrated biodegradability relationship of these polyurethanes with their structure and composition. In this research effects of different types and content of polyols on biodegradability and physico mechanical properties of prepared PUDs were investigated. The structure, properties and physico mechanical and application behavior of mentioned materials were characterized by ¹H NMR, FTIR spectroscopy, thermogravimetric analysis (TG/DTG) and dynamic mechanical thermal analysis (DMTA). The adhesion properties were measured by pull off test as well. Particle size was measured by dynamic light scattering (DLS) methods. The biodegradability of prepared polyurethane dispersions was confirmed by water uptake, hydrolytic and enzymatic degradation in phosphate buffer saline (PBS) with lipase enzyme in PBS. Results showed that by the incorporation of natural components into the polymer chain, adjusting of hydrophilic and hydrolytic liability properties of soft segments and especial relevant designs, useful polyurethane can be synthesized with desirable property of biodegradability and dispersion stability. Except for one sample, other samples were decomposed totally in enzymatic media.     

Simultaneous determination of valproic acid and its main metabolite in human plasma using a small scale dispersive liquid–liquid microextraction followed by gas chromatography–flame ionization detection

A simple, sensitive, and rapid analytical method has been developed and validated for the extraction and quantification of valproic acid and its main metabolite (3-heptanone) in human plasma. Initially, the proteins of plasma were precipitated with trifluoroacetic acid. Then a very small volume of a water-immiscible extractant and acetonitrile was mixed and rapidly injected into the pre-treated plasma sample. For further turbidity (dispersion of the extractant into sample solution), the cloudy solution was vortexed. After centrifugation, the settled phase was injected into gas chromatography-flame ionization detection. The effective parameters, such as type and volume of extraction and disperser solvents, vortex time, and pH were studied and optimized. The limits of detection of valproic acid and 3-heptanone were obtained, 0.065 and 0.015 mg L^?1, respectively. An acceptable precision was obtained for a concentration of 2 mg L^?1 of each analyte (relative standard deviation?≤?8%). The average absolute recoveries (n?=?3) of valproic acid and 3-heptanone were 52?±?2 and 42?±?1%, respectively. The validated method has been successfully used in analysis of the analytes in human plasma samples.