Modified form of binary and ternary 3-point subdivision schemes

Binary 3-point scheme, developed by Hormann and Sabin [Hormann, K. and Sabin, Malcolm A., 2008, A family of subdivision schemes with cubic precision, Computer Aided Geometric Design, 25, 41-52], has been modified by introducing a tension parameter which generates a family of C¹ limiting curves for certain range of tension parameter. Ternary 3-point scheme, introduced by Siddiqi and Rehan [Siddiqi, Shahid S. and Rehan, K., 2009, A ternary three point scheme for curve designing, International Journal of Computer Mathematics, In Press, DOI: 10.1080/00207160802428220], has also been modified by introducing a tension parameter which generates family of C¹ and C² limiting curves for certain range of tension parameter. Laurent polynomial method is used to investigate the continuity of the subdivision schemes. The performance of modified schemes has been demonstrated by considering different examples along with its comparison with the established subdivision schemes.     

Synthesis,characterization and biological activities of organotin(IV) complexes with l-lysine monohydrate

Russian Journal of General Chemistry - The new organotin(IV) complexes have been synthesized by the reaction of l-lysine monohydrate with CS2 and R2SnCl2/R3SnCl. The organotin(IV) complexes and the...     

Abeliaside,a new phenolic glucoside from Abelia triflora

A new phenolic glucoside, abeliaside, along with four known compounds, 5,6,7,4′-tetrahydroxy flavones, caffeic acid, 4-O-caffeoylquinic acid and caffeic acid glucoside, was isolated from the leaves of Abelia triflora R. Br. (Caprifoliaceae). The structure of the new compound was elucidated by different spectroscopic techniques. Compounds 1–5 were assayed for their anticancer activities against two cancerous human cell lines, MCF-7 and PC-3 cells, and normal Vero cell line using the crystal violet staining method. From the results it could be seen that caffeic acid possessed the highest anticancer effect against MCF-7 (IC₅₀: 17 μg/mL) and PC-3 (IC₅₀: 20.1 μg/mL) compared to vinblastine sulphate as reference drug (IC₅₀: 4.6, 2.8 μg/mL). The other compounds showed weak anticancer activity on both cell lines.     

Diorganotin(IV) Complexes with Monohydrate Disodium Salt of Iminodiacetic Acid: Synthesis,Characterization, Crystal Structure and Biological Activities

Diorganotin(IV) derivatives have been synthesized by the reaction of R₂SnL₂ (R=n‐Bu 1 , Ph 2 ) with monohydrate disodium salt of iminodiacetic acid ( Na₂L ) in 1 : 1 M/L ratio under reflux conditions. The compounds have been characterized by FT‐IR, NMR (¹H and ¹³C) spectoscopy, electron ionization mass spectrometry (EIMS), thermogravimetric analyses (TGA) and single crystal XRD. FTIR data indicates a mono‐dentate binding mode of the carboxylic acid group as well as participation of the amino nitrogen and aqua oxygen in coordination with organotin(IV) moieties. NMR data demonstrates a tetra‐coordinated environment around tin(IV) in solution. Mass spectrometric and thermogravimetric analyses verify the close similarities between the molecular structures of both complexes. The thermal stability of diphenyltin(IV) derivative ( 2 ) was found slightly higher than that of the free ligand ( Na₂L ). Single crystal X‐ray analysis of the complex 1 have shown a hexa‐coordinated geometry around Sn(IV) with trans configuration. There are evidences for the existence of intermolecular hydrogen bonding in the structure of the complexes. The products displayed significant antibacterial and antifungal activities in contrast to the biologically inactive ligand precursor. However, the hemolytic cytoxicity of the complexes was comparatively high than the free ligand.     

Highly stable cooperative distortion in a weak Jahn-Teller d2 cation: perovskite-type ScVO3 obtained by high-pressure and high-temperature transformation from bixbyite

A novel ScVO(3) perovskite phase has been synthesized at 8 GPa and 1073 K from the cation-disordered bixbyite-type ScVO(3). The new perovskite has orthorhombic symmetry at room temperature, space group Pnma, and lattice parameters a = 5.4006(2) ?, b = 7.5011(2) ?, and c = 5.0706(1) ? with Sc(3+) and V(3+) ions fully ordered on the A and B sites of the perovskite cell. The vanadium oxygen octahedra [V-O(6)] display cooperative Jahn-Teller (JT) type distortions, with predominance of the tetragonal Q(3) over the orthorhombic Q(2) JT modes. The orthorhombic perovskite shows Arrhenius-type electrical conductivity and undergoes a transition to triclinic symmetry space group P-1 close to 90 K. Below 60 K, the magnetic moments of the 4 nonequivalent vanadium ions undergo magnetic long-range ordering, resulting in a magnetic superstructure of the perovskite cell with propagation vector (0.5, 0, 0.5). The magnetic moments are confined to the xz plane and establish a close to zigzag antiferromagnetic mode.     

Simultaneous determination of perfluoroalkyl phosphonates, carboxylates, and sulfonates in drinking water

A trace analytical method based on high performance liquid chromatography coupled to quadrupole time-of-flight high resolution mass spectrometry was developed for simultaneous determination of perfluoroalkyl phosphonates (PFPAs, carbon chain lengths C6,8,10), perfluoroalkyl carboxylates (PFCAs, C5-12), and perfluoroalkyl sulfonates (PFSAs, C4,6,8,10) in drinking water (tap water). Analytes were enriched on a mixed mode co-polymeric sorbent (C8+quaternary amine) using solid phase extraction. Chromatographic separation was achieved on a Zorbax Extend C18 reversed phase column using a mobile phase gradient consisting of water, methanol, and acetonitrile containing 2mM ammonium acetate and 5 mM 1-methyl piperidine. The mass spectrometer was operated in electrospray negative ion mode. Use of 1-methyl piperidine in the mobile phase resulted in a significant increase in instrument sensitivity for PFPAs through improved chromatographic resolution, background suppression, and increased ionization efficiency. Method detection limits for extraction of 500 mL tap water were in the ranges of 0.095-0.17 ng/L, 0.027-0.17 ng/L, and 0.014-0.052 ng/L for PFPAs, PFCAs, and PFSAs, respectively. Whole method recoveries at a spiking level of 0.5 ng/L to 500 mL HPLC grade water were 40-56%, 56-97%, and 55-77% for PFPAs, PFCAs, and PFSAs, respectively. A matrix effect (signal enhancement) was observed in the detection of PFPAs in tap water extracts, leading to calculated recoveries of 249-297% at a 0.5 ng/L spiking level. This effect resulted in an additional improvement of method sensitivity for PFPAs. To compensate for the matrix effect, PFPAs in tap water were quantified using matrix-matched and extracted calibration standards. The method was successfully applied to the analysis of drinking water collected from six European countries. PFPAs were not detected except for perfluorooctyl phosphonate (PFOPA) at close to the detection limit of 0.095 ng/L in two water samples from Amsterdam, the Netherlands. Highest levels were found for perfluorobutane sulfonate (PFBS, 18.8 ng/L) and perfluorooctanoate (PFOA, 8.6 ng/L) in samples from Amsterdam as well as for perfluorooctane sulfonate (PFOS, 8.8 ng/L) in tap water from Stockholm, Sweden.     

Fluorescent zinc(II) complex exhibiting "on-off-on" switching toward Cu2+ and Ag+ ions

Binuclear zinc(II) and copper(II) complexes based on a new Schiff base ligand N,N'-bis(2-hydroxybenzilidene)-2,4,6-trimethylbenzene-1,3-diamine (H(2)L) have been synthesized. The ligand H(2)L and complexes under investigation have been characterized by elemental analyses, spectral (FT-IR, (1)H, (13)C NMR, ESI-MS, electronic absorption, emission), and electrochemical studies. The structures of H(2)L and complexes [{Zn(C(23)H(18)N(2)O(2))}(2)] (1) and [{Cu(C(23)H(18)N(2)O(2))}(2)]·H(2)O (2) have been determined crystallographically. Selective "On-Off-On" switching behavior of the fluorescent complex 1 has been studied. The fluorescence intensity of 1 quenches (turns-off) upon addition of Cu(2+), while enhances (turns-on) in the presence of Ag(+) ions. The mechanisms of "On-Off-On" signaling have been supported by (1)H NMR, ESI-MS, electronic absorption, and emission spectral studies. Job's plot analysis supported 1:1 and 1:2 stoichiometries for Cu(2+) and Ag(+) ions, respectively. Association and quenching constants have been estimated by the Benesi-Hildebrand method and Stern-Volmer plot. Moreover, 1 mimics a molecular keypad lock that follows correct chemical input order to give maximum output signal.     

A novel single source precursor: [bis(N,N-diethyl-N'-naphthoyl-selenoureato)palladium(II)] for palladium selenide thin films and nanoparticles

We describe for the first time the use of a single source precursor to deposit thin films and nanocrystals of palladium selenide.     

Effects of exponential volume fraction law on the natural frequencies of FGM cylindrical shells under various boundary conditions

In the present work, vibration characteristics of thin functionally graded cylindrical shells are studied under the influence of various boundary conditions. Fabrication of FGM cylindrical shell is carried out by using exponential volume fraction law. Strain- and curvature-displacements relationships are taken from Love’s thin shell theory. The frequency equation in the form of eigenvalue problem is obtained by adapting the Rayleigh-Ritz method. Characteristic beam functions are assumed to approximate the axial modal dependence. Effects of exponential volume fraction law on the natural frequencies of the FGM cylindrical shells for various boundary conditions are studied against circumferential wave number, length to radius ratio and thickness to radius ratio for different values of power law exponents. Results evaluated show good agreement with those available in the literature.     

The growth of nanoscale periodic and dot-like structures on the surface of stainless steel with femtosecond laser pulses in the dry and wet ambient environment

The present work deals with growth of nanoscale periodic and dot-like structures on the surface of stainless steel (SS) by the irradiation of femtosecond laser pulses. For this purpose Ti: Sapphire femtosecond laser pulses (wavelength of 800 nm, pulse length of 25 fs and pulse repetition rate of 1 kHz) were employed in a dry (air) and liquid confined (deionized water and ethanol) environments. The targets were exposed to 1000 succeeding pulses for various fluences ranging from 50 to 150 mJ?cm^?2. Nanoscale structures including ripples, and dots were observed by SEM analysis. The growth and dependence of structure-formation on the ambient environment and laser fluence in both central as well as peripheral ablated areas is systematically investigated. The development of nanostructures and nanoripples is correlated with structural analysis carried out by micro Raman spectroscopy.