A Spectral Method for the Electrohydrodynamic Flow in a Circular Cylindrical Conduit

This paper presents a combination of the hybrid spectral collocation technique and the spectral homotopy analysis method(SHAM for short) for solving the nonlinear boundary value problem(BVP for short) for the electrohydrodynamic flow of a fluid in an ion drag configuration in a circular cylindrical conduit. The accuracy of the present solution is found to be in excellent agreement with the previously published solution. The authors use an averaged residual error to find the optimal convergence-control parameters. Comparisons are made between SHAM generated results, results from literature and Matlab ode45 generated results, and good agreement is observed.     

Dynamic dairy facility location and supply chain planning under traffic congestion and demand uncertainty: A case study of Tehran

In this paper, dynamic dairy facility location and supply chain planning are studied through minimizing the costs of facility location, traffic congestion and transportation of raw/processed milk and dairy products under demand uncertainty. The proposed model dynamically incorporates possible changes in transportation network, facility investment costs, monetary value of time and changes in production process. In addition, the time variation and the demand uncertainty for dairy products in each period of the planning horizon is taken into account to determine the optimal facility location and the optimal production volumes. Computational results are presented for the model on a number of test problems. Also, an empirical case study is conducted in order to investigate the dynamic effects of traffic congestion and demand uncertainty on facility location design and total system costs.     

New Spectrofluorimetric Method for Determination of Cephalosporins in Pharmaceutical Formulations

Simple, accurate and sensitive spectrofluorimetric method has been proposed for the determination of three cephalosporins, namely; cefixime (cefi), cephalexine (ceph), cefotaxime sodium (cefo) in pharmaceutical formulations. The method is based on a reaction between cephalosporins with 1, 2-naphthoquinone-4-sulfonic (NQS) in alkaline medium, at pH values of 12.0 for cefi and 13.0 for ceph and cefo to give highly fluorescent derivatives extracted with chloroform and subsequently measured at 600,580 and 580 nm after excitation at 520,455 and 490 nm for cefi, ceph and cefo respectively. The optimum experimental conditions have been studied. Beer’s law is obeyed over the concentrations of 10–35 ng/mL, 10–60 ng/mL and 20–45 ng/mL for cefi,ceph and cefo, respectively. The detection limits were 2.02 ng/mL, 2.09 ng/mL and 2.30 ng/mL for cefi, ceph and cefo, respectively, with a linear regression correlation coefficient of 0.9987, 0.9995 and 0.9991 and recoveries in range from 98.5-107.04, 95.17-101.00 and 95.00-109.55% for cefi, ceph and cefo, respectively. This method is simple and can be applied for the determination of cefi, ceph and cefo in pharmaceutical formulations in quality control laboratories.     

Generalized Bessel functions: Theory and their applications

This paper presents 2 new classes of the Bessel functions on a compact domain [0,T] as generalized‐tempered Bessel functions of the first‐ and second‐kind which are denoted by GTBFs‐1 and GTBFs‐2. Two special cases corresponding to the GTBFs‐1 and GTBFs‐2 are considered. We first prove that these functions are as the solutions of 2 linear differential operators and then show that these operators are self‐adjoint on suitable domains. Some interesting properties of these sets of functions such as orthogonality, completeness, fractional derivatives and integrals, recursive relations, asymptotic formulas, and so on are proved in detail. Finally, these functions are performed to approximate some functions and also to solve 3 practical differential equations of fractionalorders.     

Fe3O4‐supported Schiff‐base copper (II) complex: A valuable heterogeneous nanocatalyst for one‐pot synthesis of new pyrano[2,3‐b]pyridine‐3‐carboxamide derivatives

A novel Cu (II) Schiff‐base complex immobilized on core‐shell magnetic Fe₃O₄ nanoparticles (Fe₃O₄@SPNC) was successfully designed and synthesized. The structural features of these nanoparticles were studied and confirmed by using various techniques including FT‐IR spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy‐dispersive X‐ray spectroscopy (EDS), vibrating sample magnetometer (VSM), X‐Ray diffraction (XRD), wavelength dispersive X‐ray spectroscopy (WDX), and inductively coupled plasma (ICP). These newly synthesized nanoparticles have been used as efficient heterogeneous catalytic system for one‐pot multicomponent synthesis of new pyrano[2,3‐b]pyridine‐3‐carboxamide derivatives. Notably, the catalyst could be easily separated from the reaction mixture by using an external magnet and reused for several successive reaction runs with no significant loss of activity or copper leaching. The present protocol benefits from a hitherto unreported MNPs‐immobilized Cu (II) Schiff‐base complex as an efficient nanocatalyst for the synthesis of newly reported derivatives of pyrano[2,3‐b]pyridine‐3‐carboxamide from one‐pot multicomponent reactions.     

Synthesis,characterization and cytotoxicity of new 2‐isonicotinoyl‐N‐phenylhydrazine‐1‐carbothioamide and its metal complexes

The reaction of the newly synthesized ligand, 2‐isonicotinoyl‐N‐phenylhydrazine‐1‐carbothioamide (H₃L), with acetate salt of Co (II), Cu (II),Ni (II) and Zn (II) led to isolation of four solid complexes. The ligand and complexes structure elucidation were based on elemental analyses, spectral analyses (IR, UV–Visible, ¹H and¹³C‐NMR, MS and ESR), TGA, molar conductivity and magnetic moments measurements. The results indicated that the ligand exists in the thioketo form, while on coordination to the metal ions; it behaves as mono‐negative bidentate chelate and exists in enol form. The optical band gap measurements of the ligand and its metal complexes are in the range 3.83–4.48 eV indicating their semi‐conducting character. The cytotoxicity examination of H₃L and its Zn (II) complex showed that the ligand have very strong cytotoxicity against both HCT‐116 and HEPG‐2 cell lines while, Zn (II) complex has moderate activity.     

Optimization of cadmium adsorption from aqueous solutions by functionalized graphene and the reversible magnetic recovery of the adsorbent using response surface methodology

Novel functionalized graphene adsorbent was prepared and characterized using different techniques. The prepared adsorbent was applied for the removal of cadmium ions from aqueous solution. A response surface methodology was used to evaluate the simple and combined effects of the various parameters, including adsorbent dosage, pH, and initial concentration. Under the optimal conditions, the cadmium removal performance of 70% was achieved. A good agreement between experimental and predicted data in this study was observed. The experimental results revealed of cadmium adsorption with high linearity follow Langmuir isotherm model with maximum adsorption capacity of 502 mg g^?1, and the adsorption data fitted well into pseudo‐second order model. Thermodynamic studies showed that adsorption process has exothermic and spontaneous nature. The recommended optimum conditions are: cadmium concentration of 970 mg L^?1, adsorbent dosage of 1 g L^?1, pH of 6.18, and T = 25 °C. The magnetic recovery of the adsorbent was performed using a magnetic surfactant to form a noncovalent magnetic functionalized graphene. After magnetic recovery of the adsorbent both components (adsorbent and magnetic surfactant) were recycled by tuning the surface charges through changing the pH of the solution. Desorption behavior studied using HNO₃ solution indicated that the adsorbent had the potential for reusability.     

Sensing and photocatalytic properties of nanosized Cu(I)CN organotin supramolecular coordination polymer based on pyrazine

Orange prismatic crystals of the supramolecular coordination polymer (SCP) _∞³[Cu(CN)₂(Me₃Sn)(Pyz)], SCP 1 , were synthesized using a self‐assembly method under ambient conditions. Nanosized 1 was obtained using the same molar ratio in water by ultrasonic irradiation. SCP 1 was characterized using single‐crystal X‐ray diffraction, elemental analysis, thermal analysis and Fourier transform infrared spectroscopy. SCP 1 and its nanosized 1 particles were also examined using powder X‐ay diffraction and scanning electron microscopy. The luminescence emission of SCP 1 was studied as well as its use as a sensor for the detection of common organic solvents and metal ions. Also, the catalytic activities of nanosized 1 towards various organic dyes were investigated under ambient conditions, UV irradiation and ultrasonic irradiation. Nanosized 1 as a heterogeneous nanoparticle catalyst exhibits high catalytic activity for the degradation of eosin‐Y and acid blue dyes. The mechanism of degradation investigated using various scavenger techniques is proposed and discussed. The catalytic oxidation process is mainly caused by ?OH radicals.     

Finely dispersed palladium on silk‐fibroin as an efficient and ligand‐free catalyst for Heck cross‐coupling reaction

A palladium–fibroin complex (Pd/Fib.) was prepared by the addition of sonicated fibroin fiber in water to palladium acetate solution. Pd (OAc)₂ was absorbed by fibroin and reduced with NaBH₄ at room temperature to the Pd(0) nanoparticles. Powder‐X‐ray diffraction, scanning electron microscopy–energy‐dispersive X‐ray spectroscopy, Fourier transform‐infrared, CHN elemental analysis and inductively coupled plasma‐atomic emission spectroscopy were carried out to characterize the Pd/Fib. catalyst. Catalytic activity of this finely dispersed palladium was examined in the Heck coupling reaction. The catalytic coupling of aryl halides (‐Cl, ‐Br, ‐I) and olefins led to the formation of the corresponding coupled products in moderate to high yields under air atmosphere. A variety of substrates, including electron‐rich and electron‐poor aryl halides, were converted smoothly to the targeted products in simple procedure. Heterogeneous supported Pd catalyst can be recycled and reused several times.