Stereoselective Synthesis of Alkyl Z -2-(2-Amino-4-oxo-1,3-thiazol-5(4 H )-yliden)Acetates in Solventless Conditions

Tiourea reacts with dialkyl acetylenedicarboxylates in solventless conditions to form 1:1 adducts, which undergo a cyclization reaction to produce alkyl Z-2-(2-amino-4-oxo-1,3-thiazol-5(4H)-yliden)acetates in fairly good yields. The stereochemistry of the ethyl Z-2-(2-amino-4-oxo-1,3-thiazol-5(4H)-yliden)acetate was established by the use of X-ray single crystal structure analysis. The reaction is completely stereoselective.     

The Oxidation of Thiocyanate to Polythiocyanic Acid Using Peroxydisulfate in Aqueous Solution

Abstract

The oxidation of thiocyanate to polythiocyanic acid by peroxydisulfate was carried out in an aqueous solution at room temperature. The primary step is the decomposition of peroxydisulfate into sulfate-free radicals. At room temperature in the presence of peroxydisulfate as a oxidizing agent, HSCN polymerizes to (HSCN)_n. The oxidation of thiocyanate in an aqueous solution is often complicated, but here we obtained the polythiocyanic acid as a major product. The products were characterized by elemental analysis, IR, UV- visible, H-NMR spectroscopy, and X-ray powder diffraction.     

Synthesis and Characterization of Organosoluble Poly(imide-ether)s with Bulky 2,3-Diaryl Imidazole Moiety: Study Physical,Thermal and Optical Properties

Two new symmetrical diamines were designed and synthesized having different functional groups such as a pair of phenyl ether linkages, 2,3-diaryl substituted imidazole rings and CF₃ groups as pendant, and characterized by FT-IR, ¹H and ¹³C-NMR spectroscopy and elemental analysis. A series of new fluorescent poly(imide-ether)s (PIEs) was prepared by polymerization of the diamines with commercial tetracarboxylic dianhydrides such as pyromellitic dianhydride and 3,3′,4,4′-benzophenone tetracarboxylic dianhydride. The resulting PIEs were amorphous and had intrinsic viscosity [η] in the range of 0.42–0.51 dL/g. The weight average molecular weights (Mw) of these polymers were measured by GPC and were in the range of 28658–35595 g/mol with molecular weight distribution (MWD) of 2.12–2.27. These polymers were readily soluble in a variety of organic solvents and formed low-colored and flexible thin films with cut-off wavelength (λ₀) in the range of 385–420 nm, and all PIEs films exhibited high optical transparency. They also possessed good thermal stability with 10% weight loss temperatures (T_10%) in the range 486–537°C in N₂. The glass transition temperatures (T_g) of PIEs are in the range 251–324°C. These polymers showed fluorescence emission in film and in solution at 459–476 nm with the quantum yields in the range 4–12%.     

Photoelectrocatalytic degradation of 3-nitrophenol at surface of Ti/TiO2 electrode

The widely utilization of phenol and its derivatives such as 3-nitrophenol (3-NP) has led to the worldwide pollution in the environment. In this study, Ti/TiO₂ photoelectrode was prepared with anodic oxidation of Ti foil electrode and then the photoelectrocatalytic (PEC) degradation of 3-NP was performed via this electrode, comparing with photocatalytic (PC), electrooxidation and direct photolysis by ultraviolet light. A significant photoelectrochemical synergetic effect in 3-NP degradation was observed on the Ti/TiO₂ electrode and rate constant for the PEC process of Ti/TiO₂ electrode was about three times as high as its PC degradation process. 3-NP concentration monitoring was carried out with differential pulse voltammetry. Results showed that PEC degradation has highest effect on concentration decreasing of 3-NP at solution and degraded it about 38 %, while other processes degradation efficiencies were about 4, 7, and 12 % for electrooxidation, direct photolysis and photocatalytic degradation, respectively. Finally, effects of solution pH and applied potential on degradation efficiency were studied and results showed that optimum pH for degradation is equal 4.00 and optimum potential is 1.2 V vs. Ag|AgCl|KCl (3M) reference electrode.     

Organically modified montmorillonite and chitosan–phosphotungstic acid complex nanocomposites as high performance membranes for fuel cell applications

Nanocomposite membranes based on polyelectrolyte complex (PEC) of chitosan/phosphotungstic acid (PWA) and different types of montmorillonite (MMT) were prepared as alternative membranes to Nafion for direct methanol fuel cell (DMFC) applications. Fourier transform infrared spectroscopy (FTIR) revealed an electrostatically fixed PWA within the PEC membranes, which avoids a decrease in proton conductivity at practical condition. Various amounts of pristine as well as organically modified MMT (OMMT) (MMT: Cloisite Na, OMMT: Cloisite 15A, and Cloisite 30B) were introduced to the PEC membranes to decrease in methanol permeability and, thus, enhance efficiency and power density of the cells. X-ray diffraction patterns of the nanocomposite membranes proved that MMT (or OMMT) layers were exfoliated in the membranes at loading weights of lower than 3 wt.%. Moreover, the proton conductivity and the methanol permeability as well as the water uptake behavior of the manufactured nanocomposite membranes were studied. According to the selectivity parameter, ratio of proton conductivity to methanol permeability, the PEC/2 wt.% MMT 30B was identified as the optimum composition. The DMFC performance tests were carried out at 70 °C and 5 M methanol feed and the optimum membrane showed higher maximum power density as well as acceptable durability compared to Nafion 117. The obtained results indicated that owing to the relatively high selectivity and power density, the optimum nanocomposite membrane could be considered as a promising polyelectrolyte membrane (PEM) for DMFC applications.     

Non-covalently lactose imprinted polymers and recognition of saccharides in aqueous solutions

The aim of this work was to prepare lactose imprinted polymer and study of its selectivity for the recognition of different mono- and disaccharides. A series of molecularly imprinted polymers (MIPs) against lactose were synthesized and their binding properties were compared with a Blank non-imprinted polymer. Methacrylamide (MAAM) and ethylene glycol dimethacrylate were used as functional monomer and cross-linker, respectively. Dimethylsulfoxide was also applied as polymerization solvent. Different lactose:MAAM ratios were applied and optimized MIP was selected in a conventional batch adsorption study. The dissociation constant and maximum binding sites of polymer were determined using the Scatchard analysis. The selectivity of MIP for different mono- and disaccharides was also evaluated. The results indicated that the shape of cavity and orientation of functional monomers in binding sites and the spatial arrangement of hydroxyl groups in saccharide structure were responsible for the selectivity of lactose imprinted polymer.     

Fe(NO3)3·9H2O as Efficient Catalyst for One‐pot Synthesis of Highly Functionalized Piperidines

Fe(NO₃)₃·9H₂O is used as an efficient and effective catalyst for the one‐pot three‐component synthesis of highly functionalized piperidines from aromatic aldehydes, anilines and b–ketoesters in ethanol at ambient temperature. This procedure includes some important aspects like the easy work‐up, no need to column chromatography, simple and readily available precursors, and good to high yields.     

Three-Component,One-Pot Synthesis of Benzo[b][1,4]oxazines in Ionic Liquid 1-Butyl-3-methylimidazolium Bromide

Benzo[b][1,4]oxazines have been synthesized in good to excellent yields in the presence of the ionic liquid 1-butyl-3-methylimidazolium bromide [bmim]Br under relatively mild conditions without any added catalyst, The method offers the advantages of good yields and short reaction times, and the ionic liquid can be easily separated from the product and reused.     

Microwave Assisted Synthesis of Dibenzoxazepines

Dibenzo[b,f][1,4]oxazepine derivatives were synthesized in good yields and short reaction times by the reaction of 2‐chlorobenzaldehydes and 2‐aminophenoles in basic conditions under microwave irradiation.     

Highly sensitive FRET-based fluorescence immunoassay for aflatoxin B1 using cadmium telluride quantum dots

We report on a competitive immunoassay for the determination of aflatoxin B1 using fluorescence resonance energy transfer (FRET) from anti-aflatoxin B1 antibody (immobilized on the shell of CdTe quantum dots) to Rhodamine 123 (Rho 123-labeled aflatoxin B1 bound to albumin). The highly specific immunoreaction between the antibody against aflatoxin B1 on the QDs and the labeled-aflatoxin B1 brings the Rho 123 fluorophore (acting as the acceptor) and the QDs (acting as the donor) in close spatial proximity and causes FRET to occur upon photoexcitation of the QDs. In the absence of unlabeled aflatoxin B1, the antigen-antibody complex is stable, and strong emission resulting from the FRET from QDs to labeled aflatoxin B1 is observed. In the presence of aflatoxin B1, it will compete with the labeled aflatoxin B1-albumin complex for binding to the antibody-QDs conjugate so that FRET will be increasingly suppressed. The reduction in the fluorescence intensity of the acceptor correlates well with the concentration of aflatoxin B1. The feasibility of the method was established by the detection of aflatoxin B1 in spiked human serum. There is a linear relationship between the increased fluorescence intensity of Rho 123 with increasing concentration of aflatoxin B1 in spike human serum, over the range of 0.1–0.6 μmol·mL^?1. The limit of detection is 2?×?10^?11 M. This homogeneous competitive detection scheme is simple, rapid and efficient, and does not require excessive washing and separation steps.