Single‐step multiresidue determination of ten multiclass veterinary drugs in pork,milk, and eggs using liquid chromatography with tandem mass spectrometry

A multiclass, multiresidue determination method is reported for the detection of ten veterinary drugs, including scopolamine, metoclopramide, acriflavine, berberine, tripelennamine, diphenhydramine, acrinol, triamcinolone, loperamide, and roxithromycin in pork, milk, and eggs. The method involves a simple extraction using 0.1% formic acid in acetonitrile, followed by defatting with n‐hexane, centrifugation, and filtration prior to liquid chromatography with tandem mass spectrometric analysis. As ion suppression and enhancement effects are reported, matrix‐matched calibrations are used for quantification, with determination coefficients ≥0.9765. For the majority of the tested analytes, the intra‐ and interday accuracy (expressed as recovery %) range from 70.6 to 94.6% and from 70.1 to 93.3%, respectively, and the precision (expressed as relative standard deviation) ranges from 0.5 to 19.8% and from 2.8 to 18.4% in all matrices. The limits of quantification range between 0.5 and 10 ng/g. The validated tandem mass spectrometry method is successfully applied to market samples; the target analytes are not detected in any of the tested samples. In terms of accuracy, no extract cleanup is deemed necessary. The developed method is feasible for the simultaneous detection of the tested analytes in pork, milk, and eggs.     

Independent isomeric yield ratios of 95m,gNb in the natMo(γ, pxn) and natZr(p,xn) reactions

The independent isomeric yield ratios of ^95m,gNb from the ^natMo(γ, pxn) reactions with bremsstrahlung end-point energies of 45, 50, 55, 60, and 70 MeV were determined by an activation and an off-line γ-ray spectrometric technique at the Pohang accelerator laboratory (PAL), Korea. The isomeric yield ratios of ^95m,gNb from the ^natZr(p, xn) reactions were also determined in eight different proton energies within 19.4–44.7 MeV by a stacked-foil activation and an off-line γ-ray spectrometric technique using the MC-50 cyclotron of Korea Institute of Radiological and Medical Sciences (KIRAMS), Korea. The measured isomeric yield ratios of ^95m,gNb from the present work and the literature data in the ^natMo(γ, pxn) and ^natZr(p, xn) reactions were compared with the similar literature data in the ^natMo(p, αxn) reactions. It was found that the isomeric yield ratio of ^95m,gNb increases with projectile energy, which indicate the effect of excitation energy. However, at the same excitation energy, the isomeric yield ratios of ^95m,gNb in the ^natZr(p, xn) and ^natMo(p, αxn) reactions are higher than those in the ^natMo(γ, pxn) reaction, which indicates the role of input angular momentum. The isomeric yield ratios of ^95m,gNb in the ^natMo(γ, pxn), ^natZr(p, xn), and ^natMo(p, αxn) reactions were also calculated using computer code TALYS 1.4. The calculated isomeric yield ratios of ^95m,gNb from three reactions increase with excitation energy. However, in all the three reactions, the calculated values are significantly higher than the experimental data.     

β1-integrin-dependent migration of microglia in response to neuron-released α-synuclein

Chronic neuroinflammation is an integral pathological feature of major neurodegenerative diseases. The recruitment of microglia to affected brain regions and the activation of these cells are the major events leading to disease-associated neuroinflammation. In a previous study, we showed that neuron-released α-synuclein can activate microglia through activating the Toll-like receptor 2 (TLR2) pathway, resulting in proinflammatory responses. However, it is not clear whether other signaling pathways are involved in the migration and activation of microglia in response to neuron-released α-synuclein. In the current study, we demonstrated that TLR2 activation is not sufficient for all of the changes manifested by microglia in response to neuron-released α-synuclein. Specifically, the migration of and morphological changes in microglia, triggered by neuron-released α-synuclein, did not require the activation of TLR2, whereas increased proliferation and production of cytokines were strictly under the control of TLR2. Construction of a hypothetical signaling network using computational tools and experimental validation with various peptide inhibitors showed that β1-integrin was necessary for both the morphological changes and the migration. However, neither proliferation nor cytokine production by microglia was dependent on the activation of β1-integrin. These results suggest that β1-integrin signaling is specifically responsible for the recruitment of microglia to the disease-affected brain regions, where neurons most likely release relatively high levels of α-synuclein.     

Demonstration of the Heterolytic O?O Bond Cleavage of Putative Nonheme Iron(II)?OOH(R) Complexes for Fenton and Enzymatic Reactions

One‐electron reduction of mononuclear nonheme iron(III) hydroperoxo (Fe^III OOH) and iron(III) alkylperoxo (Fe^III OOR) complexes by ferrocene (Fc) derivatives resulted in the formation of the corresponding iron(IV) oxo complexes. The conversion rates were dependent on the concentration and oxidation potentials of the electron donors, thus indicating that the reduction of the iron(III) (hydro/alkyl)peroxo complexes to their one‐electron reduced iron(II) (hydro/alkyl)peroxo species is the rate‐determining step, followed by the heterolytic O O bond cleavage of the putative iron(II) (hydro/alkyl)peroxo species to give the iron(IV) oxo complexes. Product analysis supported the heterolytic O O bond‐cleavage mechanism. The present results provide the first example showing the one‐electron reduction of iron(III) (hydro/alkyl)peroxo complexes and the heterolytic O O bond cleavage of iron(II) (hydro/alkyl)peroxo species to form iron(IV) oxo intermediates which occur in nonheme iron enzymatic and Fenton reactions.     

Effect of backbone structures on photovoltaic properties in naphthodithiophene‐based copolymers

A “zigzag” naphthodithiophene‐based copolymer, poly[4,9‐bis(2‐ethylhexyloxy)naphtho[1,2‐b:5,6‐b′]dithiophene‐2,7‐diyl‐alt‐1,3‐(5‐heptadecan‐9‐yl)‐4H‐thieno[3,4‐c]pyrrole‐4,6‐dione] (P1) is synthesized and its properties are compared to “linear” naphthodithiophene‐based copolymer, poly[4,9‐bis(2‐ethylhexyloxy)naphtho[2,3‐b:6,7‐d′]dithiophene‐2,7‐diyl‐alt‐1,3‐(5‐heptadecan‐9‐yl)‐4H‐thieno[3,4‐c]pyrrole‐4,6‐dione] (P2). The field‐effect carrier mobilities and the optical, electrochemical, and photovoltaic properties of the copolymers are systematically investigated. The results suggest that the backbone of the copolymer structure significantly influences the band gap, electronic energy levels, carrier mobilities, and photovoltaic properties of the resultant thin films. In this work, the zigzag naphtho[1,2‐b:5,6‐b′]dithiophene‐based copolymer displays a good hole mobility and a high open‐circuit voltage; however, polymer solar cells in which the linear naphtho[2,3‐b;6,7‐d′]dithiophene‐based copolymer is used as the electron donor material perform better than the cells prepared using the zigzag naphtho[1,2‐b:5,6‐b′]dithiophene‐based copolymer. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 305–312     

Novel 9,9′‐(1,3‐phenylene)bis‐9H‐carbazole‐containing copolymers as hole‐transporting and host materials for blue phosphorescent polymer light‐emitting diodes

Novel photo‐crosslinkable hole‐transport and host materials incorporated into multilayer blue phosphorescent polymer light‐emitting diodes (Ph‐PLEDs) were demonstrated in this study. The oxetane‐containing copolymers, which function as hole‐transport layers (HTL), could be cured by UV irradiation in the presence of a cationic photoinitiator. The composition of the two monomers was varied to yield three different hole‐transporting copolymers, [Poly(9,9′‐(5‐(((4‐(7‐(4‐(((3‐methyloxetan‐3‐yl)methoxy)methyl)phenyl)octan‐3‐yl)benzyl)oxy)methyl)?1,3‐phenylene)bis(9H‐carbazole)) ( P(mCP‐Ox)‐I , ‐II , and ‐III )]. In addition, monomer 1 was copolymerized with styrene to produce copolymer P(mCP‐Ph) as a host material for bis[2‐(4,6‐difluorophenyl)pyridinato‐C²,N](picolinato)iridium(III) (FIrpic), a blue‐emitting dopant. All mCP‐based copolymers displayed high glass transition temperatures (T_g) of up to 130–140 °C and triplet energies of up to 3.00 eV. The blue Ph‐PLEDs exhibited a maximum external quantum efficiency of 2.55%, in addition to a luminous efficiency of 8.75 cd A^?1 when using the device configuration of indium tin oxide/poly(3,4‐ethylenedioxythiophene):poly(styrene sulfonate)/ P(mCP‐OX)‐III / P(mCP‐Ph) :FIrpic(15 wt %)/3,3′‐[5′‐[3‐(3‐pyridinyl)phenyl][1,1′:3′,1′′‐terphenyl]‐3,3′′‐diyl]bispyridine/LiF/Al. The device bearing P(mCP‐Ox)‐III HTL, containing the highest composition of mCP unit, exhibited better performance than the other devices, which is attributed to induction of more balanced charge carriers and carrier recombination in the emissive layer. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 707–718     

On‐line Concentration and Separation of Parabens by Micellar Electrokinetic Chromatography Using Polymer Solutions

Simultaneous separation and quantification of seven parabens commonly used as preservatives in cosmetic products, by micellar electrokinetic chromatography with a stacking technique has been demonstrated. An effective on‐line concentration strategy involving a combination of sweeping and the use of polymer solutions is a key feature of the proposed method, which successfully determined individual parabens. The analysis parameters such as injection time, pH and concentration of phosphate solution, and concentration of sodium dodecyl sulphate (SDS) and poly(ethylene oxide) (PEO) were examined. The optimum conditions were found to be as follows: a 15 mM phosphate solution (pH 9.5) containing 20 mM SDS for filling the capillary, and for the separation electrolytes, 0.100% PEO (8 MDa) added to the phosphate and SDS solution of the same composition as for the capillary. The entire analysis process was completed in 13 min and a 930‐2200‐fold enhancement factor was achieved. The LODs (S/N = 3) for this approach were in the range from 4.32 to 7.78 nM. The linear range for each paraben was between 50 nM and 5.0 μM (R² > 0.990). The optimized method was then successfully applied to the determination of parabens in commercial cosmetic products.     

Development and validation of an ultra‐performance liquid chromatography method for simultaneous analysis of 20 antihistaminics in dietary supplements

The purpose of this study was to develop and validate an ultra‐performance liquid chromatography method for simultaneous analysis of 20 antihistamines (illegal additives) in dietary supplements. The limits of detection and quantitation of the method ranged from 1.5 to 2.5 µg/mL and from 20.0 to 50.0 µg/mL, respectively. The determination coefficient was >0.999, precisions were 0.2–5.1% (intra‐day) and 0.1–8.8% (inter‐day), and accuracies were 84.5–111.2% (intra‐day) and 91.9–112.0% (inter‐day). The mean recoveries of 20 targeted compounds from dietary supplements ranged from 75.4 to 119.3%. The relative standard deviations were <6.6% and complied with established international guidelines. The relative standard deviation of stability was <0.8%. Fifty‐two commercially available dietary supplements were evaluated using this method, and were found to have none of the 20 antihistamines in significant abundance. Copyright © 2014 John Wiley & Sons, Ltd.     

Development and validation of a high‐performance liquid chromatography–tandem mass spectrometric method for simultaneous determination of bupropion,quetiapine and escitalopram in human plasma

In the present study, an effective high performance liquid chromatography–tandem mass spectrometric (HPLC/MS/MS) method was developed and validated to simultaneously determine bupropion (BUP), quetiapine (QUE) and escitalopram (ESC) in human plasma using carbidopa as the internal standard. Chromatographic separation was achieved on a Waters Sun Fire C₁₈ column using reversed‐phase chromatography. The MS/MS experiment was performed in positive ion multiple reaction monitoring mode to produce product ions of m/z 240.3 → 184.2 for BUP, 384.2 → 253.1 for QUE, 325.3 → 109.3 for ESC and 227.2 → 181.2 for the internal standard. The method showed good linearity (R² ≥ 0.997), precision (relative standard deviation ≤7.5%), satisfactory intra‐ and interday accuracy (88.4–113.0%) and acceptable extraction recovery (87.2–115.0%), matrix effect (84.5.5?108.7%) and stability (92.3?103.5%). The method was successfully applied to determine the concentrations of BUP, QUE and ESC in human plasma samples. Copyright © 2014 John Wiley & Sons, Ltd.