Novel method for bulk resistance evaluation in conductivity measurement for high-purity water

A major issue with the electrolytic conductivity measurement for pure water is the lack of standard or reference methods. A primary method traceable to SI and suitable for pure-water conductivity measurement was developed at the Physikalisch-Technische Bundesanstalt (PTB), Germany, as the base for the calibration method for the conductivity measuring devices at the low conductivity level. This paper provides a novel method to calculate the bulk resistance of pure water using impedance measured at a single frequency, which is one of the key procedures for the primary methods.     

Effect of interacting nanoparticles on the ordered morphology of block copolymer/nanoparticle mixtures

We investigated the effect of hard additives, that is, magnetic nanoparticles (NPs) and metal NPs, on the ordered morphology of block copolymers by varying the NP concentration. To characterize the structural changes of a block copolymer associated with different NP loadings, small-angle X-ray scattering and transmission electron microscopy were performed. Monodisperse maghemite (γ-Fe₂O₃) NPs (7 nm in diameter) and silver (Ag) NPs (6 nm in diameter) with surfaces modified with oleic acids were synthesized, and a cylinder-forming poly(styrene-block-isoprene) diblock copolymer was used as a structure-directing matrix for the NPs. As the NP concentration increased, domains of NP aggregates were observed for both magnetic and metal NPs. In the case of mixtures of cylinder-forming poly(styrene-block-isoprene) and Ag NPs with weak particle–particle interactions, random aggregates of Ag NPs were observed, and the ordered morphology of the block copolymer lost its long-range order with an increase in the NP concentration. However, regular, latticelike aggregates obtained with γ-Fe₂O₃ NPs, because of the strong interparticle interactions, induced an intriguing morphological transformation from hexagonal cylinders to body-centered-cubic spheres via undulated cylinders, whereas the neat block copolymer did not show such a morphological transition over a wide range of temperatures. The interplay between magnetic NPs and the block copolymer was also tested with magnetic NPs of different sizes. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3571–3579, 2006     

Syntheses and characterization of three hybrid materials based on polymeric copper complexes and saturated Keggin polyoxoanions

Three novel heteropolytungstates, [Cu(phen)₂]₄[α-SiW₁₂O₄₀] (1), [Cu₄(4,4′-bpy)₃(2,2′-bpy)₄][α-SiW₁₂O₄₀] · H₂O (2) and [Cu(4,4′-bpy)(4,4′-Hbpy)_0.5]₂[PW₁₂O₄₀] (3) (phen = 1,10-phenanthroline, 4,4′-bpy = 4,4′-bipyridine, 2,2′-bpy = 2,2′-bipyridine), have been synthesized and characterized by elemental analyses, IR, TG analyses and single-crystal X-ray diffraction. Compound (1) exhibits interesting chiral layer constructed from interperpendicular helical chains running along a crystallographic 2₁ axis in the c and a directions. Furthermore, the chiral layers are connected by the [α-SiW₁₂O₄₀]⁴⁻ anions via hydrogen bonding interactions to form a 3D superamolecular structure. The [Cu₄(4,4′-bpy)₃(2,2′-bpy)₄]⁴⁺ coordinated complexes in compound (2) are packed together via the aromatic π–π stacking interactions and exhibit an interesting 3D sandglasslike “host” network with 1D channels, in which [α-SiW₁₂O₄₀]⁴⁻ anions “guests” reside. Compound (3) has a unique 2D superamolecular network, which is composed of cationic Cu^I coordination polymer chains and discrete [PW₁₂O₄₀]³⁻ polyoxoanions as linkers. It is noteworthy that the monprotonated 4,4′-bpy ligands of (3) act as arms and connect the adjacent 2D network, generating a 3D interpenetrating superamolecular structure.     

Dual-purpose sample trap for on-line strong cation-exchange chromatography/reversed-phase liquid chromatography/tandem mass spectrometry for shotgun proteomics. Application to the human Jurkat T-cell proteome

A dual-purpose sample-trapping column is introduced for the capacity enhancement of proteome analysis in on-line two-dimensional nanoflow liquid chromatography (strong cation-exchange chromatography followed by reversed-phase liquid chromatography) and tandem mass spectrometry. A home-made dual trap is prepared by sequentially packing C18 reversed-phase (RP) particles and SCX resin in a silica capillary tubing (1.5 cm x 200 microm I.D. for SCX, 0.7 cm x 200 microm for RP) ended with a home-made frit and is connected to a nanoflow column having a pulled tip treated with an end frit. Without having a separate fraction collection and concentration process, digested peptide mixtures were loaded directly in the SCX part of the dual trap, and the SCX separation of peptides was performed with a salt step elution initiated by injecting only 8 microL of NH4HCO3 solution from the autosampler to the dual trap. The fractionated peptides at each salt step were directly transferred to the RP trap packed right next to the SCX part for desalting, and a nanoflow LC-MS-MS run was followed. During the sample loading-SCX fractionation-desalting, flow direction was set to bypass the analytical column to prevent contamination. The entire 2D-LC separation and MS-MS analysis were automated. Evaluation of the technique was made with an injection of 15 microg peptide mixtures from human Jurkat T-cell proteome, and the total seven salt step cycles followed by each RPLC run resulted in an identification of 681 proteins.     

Syntheses and properties of mixed dinuclear copper(II) complexes with heterocyclic dithiocarbamates and a cyclic octadentate tertiary amine

Five new Cu^II complexes of general formula [Cu₂(Rdtc)tpmc](ClO₄)₃, (1)–(5), where tpmc and Rdtc ^– refer to N,N,N,N-tetrakis(2-pyridylmethyl)-1,4,8,11-teraazacyclotetradecane and piperidine- (Pipdtc), 4-morpholine- (Morphdtc), 4-thiomorpholine- (Timdtc), piperazine- (Pzdtc) or N-methylpiperazine- (N-Mepzdtc) dithiocarbamates, respectively, have been prepared. Elemental analyses, conductometric and magnetic measurements, u.v./vis, i.r., e.p.r. and mass spectroscopy have been employed to characterize them. The complexes adopt an exo coordination of Cu^II ions and tpmc. The dithiocarbamate ion joins both the sulphur and the copper atoms acting as a bridging ligand The presence of different heteroatoms in the piperidine ring influences the (C=N) and (C=S) vibrations which decrease in the order of the complexes: Pipdtc>N-Mepipdtc>Pzdtc>Morphdtc>Timdtc ligands. Attention has been paid to the detailed mechanism of the mass spectral fragmentation of the complexes. The g _eff factors of the complexes have been also estimated by e.p.r. spectra. Finally, the complexes obtained demonstrate microbiologycal activity against some bacteria.     

Interaction between the antibacterial compound,oleuropein, and model membranes

Oleuropein, a secoiridoid glycoside extracted from the olive tree, Olea europaea L., has been described as showing antibacterial properties. However, the exact mechanism of these antimicrobial properties is not yet well understood. In the present study, we have studied the interaction of oleuropein with phosphatidylglycerol (PG) as a model membrane for Staphylococcus aureus (S. aureus) (Gram-positive bacteria) and phosphatidylethanolamine and Escherichia coli (E. coli) lipid extract as a model membrane for E. coli (Gram-negative bacteria). The study has been carried out using monolayers as model membranes and using kinetics at constant area and compression isotherms with Brewster angle microscopy (BAM) observations. The results show that oleuropein interacts in higher extent with PG monolayers, which is related with its stronger antibacterial effect against Gram-positive bacteria. The effects on the membrane are probably produced at the cell surface because oleuropein did not form stable mixed monolayers with the lipids assayed at the air/water interface.     

Investigation of Raman,FT-IR,EPR spectra and antimicrobial activity of 2-(5-H/Me/Cl-1<Emphasis Type="BoldItalic">H</Emphasis>-benzimidazol-2-yl)-phenol ligands and their Fe(NO<Subscript>3</Subscript>)<Subscript>3</Subscript> complexes

2-(5-H/Me/Cl-1H-benzimidazol-2-yl)-phenol ligands form 1:1 electrolytes, 5-coordinate monometallic complexes with iron(III) nitrate. The geometry of the [Fe(L)(OH)(H₂O)₂](NO₃) complexes was derived from theoretical calculation in DGauss/DFT level (DZVP basis set) on CACHE. In all of the complexes the ligands are bidentate, via one imine nitrogen atom and phenolate oxygen atom. The coordination is completed with a hydroxide ion, and two water molecules, adopting a distorted square pyramidal geometry. The structures of the compounds were confirmed on the basis of elemental analysis, molar conductivity, magnetic moment, FT-Raman, FT-IR (mid-IR, far-IR), EPR and u.v.–vis. The antimicrobial activities of the free ligands, their hydrochloride salts, and the complexes were evaluated using the disk diffusion method in dimethyl sulfoxide (DMSO) as well as the minimal inhibitory concentration (MIC) dilution method, against nine bacteria and the results are compared with several known antibiotic agents. Antifungal activities were reported for Candida albicans, Kluyveromyces fragilis, Rhodotorula rubra, Debaryomyces hansenii, Hanseniaspora guilliermondii, and the results were referenced against nystatin, ketaconazole, and clotrimazole antifungal agents. In most cases, the compounds tested showed broad-spectrum (Gram⁺ & Gram⁻ bacteria) activities that were either more active or as potent as the references.     

Synthesis of 1,2-Diphenylpyrazolidin-4-ol and its Derivatives

Summary. A synthesis of 1,2-diphenylpyrazolidin-4-ol via direct heterocyclization of 1,2-diphenylhydrazine with 1-chloro-2,3-epoxypropane, its O-epoxypropyl-, O-ethyl-, and O-benzylderivatives are described. Novel hydrazone derivatives with pyrazolidine units were also synthesized. The compounds were characterized by spectroscopic methods as well as elemental analyses.     

Synthesis of highly textured superconducting NdBa<Subscript>2</Subscript>Cu<Subscript>3</Subscript>O<Subscript>7-<Emphasis Type="Italic">y</Emphasis></Subscript> thin films by two aqueous sol-gel dip coating techniques

Today, the deposition of coated conductors on a variety of substrates is often performed using a vacuum or low pressure technique. However, obtaining uninterrupted deposition at high speed, increasing flexibility in composition and attaining independence of geometric constraints of the substrates are areas in which vacuum techniques will need sustained development in order to answer industrial demands. The development of the next generation of deposition methods, based on deposition under atmospheric environment and from aqueous precursor solutions is a real challenge. This work describes the deposition of thin NdBa₂Cu₃O_7-y layers on SrTiO₃ single crystals based on a new sol-gel dip coating process using aqueous precursor solutions. Two inorganic aqueous sol-gel routes were investigated, a metal nitrate–citric acid based and a metal acetate–triethanol amine based solution. Using detailed thermal analysis, it is shown that adjusting the different parameters during thermal treatment can be used to control the morphology of the films. Also special attention is given to the microstructure of the thin film because of its relevance to the superconducting transport properties of the coated conductor system.     

Determination of 19-norandrosterone in CCQM-P68. NIST results using an isotope dilution liquid chromatography/tandem mass spectrometry method

The US National Institute of Standards and Technology (NIST) participated in an international interlaboratory study under the auspices of the Consultative Committee for Amount of Substance (CCQM) for the determination of 19-norandrosterone (19-NA) in urine, the principal metabolite of nandrolone and certain other synthetic testosterone substitutes banned for use by the World Antidoping Agency (WADA). Prior to this study, NIST developed a candidate reference measurement procedure based upon isotope dilution liquid chromatography/tandem mass spectrometry. This method was applied to a urine sample distributed to the participants in the study by the Australian National Measurement Institute, Pymble, Australia (NMIA). The NIST results were in very good agreement with those from the other participants, all of whom used methods based upon gas chromatography/mass spectrometry. All known significant sources of uncertainty were evaluated, resulting in a relative expanded uncertainty of less than 5% (coverage factor k = 2).