Phase‐controlled directional switching of surface plasmon polaritons via beam interference

A novel method for switching the direction of surface plasmon polarition (SPP) launching is proposed. The principle behind the switching mechanism is based on the relative phase difference between the reference beam and the control beam. Selective guidance of the direction of SPP can be explained by the composition of the charge parity that is induced near the slit edge, which is caused by interference created by two incident beams. The switching of SPP launching direction could be implemented by simple phase modulation of the control beam when the slit parameters satisfy the specific conditions at the designed specific wavelength. An experimental demonstration, in good agreement with numerical results, shows that our configuration of SPP switching can be operated by a quite simple interaction.     

Fiber-optic pH sensor based on sol-gel film immobilized with neutral red

In this study, we developed a fiber-optic pH sensor based on a sol-gel film immobilized with neutral red (NR). A solgel film was prepared by mixing tetramethylorthosilicate (TMOS), trimethoxymethylsilane (MTMS), ethanol (EtOH), distilled water (H₂O), and NR powder. Accordingly, the thin pH sol-gel film was fabricated through a sol-gel process with a dip-coating method. The thickness and diameter of the fabricated pH sol-gel film are 0.11 and 0.6 mm, respectively. We measured the optical absorbance and the light intensity with the spectra of reflected light, which change with the color variation of the pH sol-gel film in the fiber-optic sensing probe. From the experimental results, we demonstrated that the proposed fiber-optic pH sensor has good reversibility, reproducibility, and a fast response time, in which the optical properties of the NR-based pH sol-gel film change with the pH value.     

Nucleophilic substitution reactions promoted by oligoethylene glycols: a mechanistic study of ion‐pair SN2 processes facilitated by Lewis base

We present a mechanistic study for nucleophilic substitution (S_N2) reactions facilitated by multifunctional n‐oligoethylene glycols (n‐oligoEGs) using alkali metal salts MX (M⁺ = Cs⁺, K⁺, X^– = F^–, Br^–, I^–, CN^–) as nucleophilic agents. Density functional theory method is employed to elucidate the underlying mechanism of the S_N2 reaction. We found that the nucleophiles react as ion pairs, whose metal cation is ‘coordinated’ by the oxygen atoms in oligoEGs acting as Lewis base to reduce the unfavorable electrostatic effects of M⁺ on X^–. The two terminal hydroxyl (?OH) function as ‘anchors’ to collect the nucleophile and the substrate in an ideal configuration for the reaction. Calculated barriers of the reactions are in excellent agreement with all experimentally observed trends of S_N2 yields obtained by using various metal cations, nucleophiles and oligoEGs. The reaction barriers are calculated to decrease from triEG to pentaEG, in agreement with the experimentally observed order of efficiency (triEG < tetraEG < pentaEG). The observed relative efficiency of the metal cations Cs⁺ versus K⁺ is also nicely demonstrated (larger [better] barrier [efficiency] for Cs⁺ than for K⁺). We also examine the effects of the nucleophiles (F^–, Br^–, I^–, CN^–), finding that the magnitudes of reaction barriers are F^– > CN^– > Br^– > I^–, elucidating the observation that the yield was lowest for F^–. It is suggested that the role of oxygen atoms in the promoters is equivalent to that of –OH group in bulky alcohols (tert‐butyl or amyl‐alcohol) for S_N2 fluorination reactions previously studied in our lab. Copyright © 2012 John Wiley & Sons, Ltd.     

Tailor-made hexaethylene glycolic ionic liquids as organic catalysts for specific chemical reactions

Hexaethylene glycol substituted imidazolium based ionic liquids (hexaEGILs) were designed and prepared well-tailored to a specific organic reaction using alkali-metal fluorides (MFs) as multifunctional organic catalysts. These hexaEGIL catalysts could significantly enhance the reactivity of MF, even KF. Furthermore, the hexaEGIL systems showed tremendous efficiency in the nucleophilic fluorination of base-sensitive substrates.     

Photo-activated 5-hydroxyindole-3-acetic acid induces apoptosis of prostate and bladder cancer cells

5-Hydroxyindole-3-acetic acid (5-HIAA), an indole derivative, is the main metabolite of serotonin in the human body. We determined whether or not ultraviolet B (UVB)-activated 5-HIAA (5-HIAA(UVB)) affects the viability of human prostate (LnCaP and PC-3) and bladder cancer cells (TCCSUP). While 5-HIAA alone had no cytotoxic effect at <1mM, 5-HIAA(UVB) induced LnCaP, PC-3, and TCCSUP cell death in a time- and dose-dependent manner. Cell cycle analysis showed that 5-HIAA(UVB) markedly increased the sub-G(0)/G(1) phase and resulted in cell cycle disruption. To elucidate the death mechanism by 5-HIAA(UVB), we examined the signal transduction pathways related to apoptosis using Western blot analysis. 5-HIAA(UVB) led to phosphorylation of stress-activated signaling proteins, such as c-Jun N-terminal kinase (JNK) and/or p38 mitogen-activated protein kinase (MAPK). Furthermore, 5-HIAA(UVB) activated caspase-8, -9, and -3 and cleaved poly(ADP-ribose) polymerase (PARP), which are indicators of apoptosis. From these findings, the present study demonstrated that 5-HIAA(UVB) induces apoptotic cell death of prostate and bladder cancer cells via stress-mediated signaling and apoptotic pathways. Therefore, we suggest that 5-HIAA might be used as a new photosensitizer for photodynamic cancer therapy.     

Classical Cys2His2 zinc finger peptides are rapidly oxidized by either H2O2 or O2 irrespective of metal coordination

ZIF268, a member of the classical zinc finger protein family, contains three Cys(2)His(2) zinc binding domains that together recognize the DNA sequence 5'-AGCGTGGGCGT-3'. These domains can be fused to an endonuclease to make a chimeric protein to target and cleave specific DNA sequences. A peptide corresponding to these domains, named ZIF268-3D, has been prepared to determine if the zinc finger domain itself can promote DNA cleavage when a redox active metal ion, Fe(II), is coordinated. The UV-vis absorption spectrum of Fe(II)-ZIF268-3D is indicative of Fe(II) coordination. Using fluorescence anisotropy, we demonstrate that Fe(II)-ZIF268-3D binds selectively to its target DNA in the same manner as Zn(II)-ZIF268-3D. In the presence of added oxidant, H(2)O(2) or O(2), DNA cleavage is not observed by Fe(II)-ZIF268-3D. Instead, the peptide itself is rapidly oxidized. Similarly, Zn(II)-ZIF268-3D and apo-ZIF268-3D are rapidly oxidized by H(2)O(2) or O(2), and we propose that ZIF268-3D is highly susceptible to oxidation.     

Primary, secondary, and tertiary amines for CO2 capture: designing for mesoporous CO2 adsorbents

CO(2) emissions, from fossil-fuel-burning power plants, the breathing, etc., influence the global worming on large scale and the man's work efficiency on small scale. The reversible capture of CO(2) is a prominent feature of CO(2) organic-inorganic hybrid adsorbent to sequester CO(2). Herein, (3-aminopropyl) trimethoxysilane (APTMS), [3-(methylamino)propyl] trimethoxysilane (MAPTMS), and [3-(diethylamino) propyl] trimethoxysilane (DEAPTMS) are immobilized on highly ordered mesoporous silicas (SBA-15) to catch CO(2) as primary, secondary, and tertiary aminosilica adsorbents. X-ray photoelectron spectroscopy was used to analyze the immobilized APTMS, MAPTMS, and DEAPTMS on the SBA-15. We report an interesting discovery that the CO(2) adsorption and desorption on the adsorbent depend on the amine type of the aminosilica adsorbent. The adsorbed CO(2) was easily desorbed from the adsorbent with the low energy consumption in the order of tertiary, secondary, and primary amino-adsorbents while the adsorption amount and the bonding-affinity increased in the reverse order. The effectiveness of amino-functionalized (1(o), 2(o), and 3(o) amines) SBA-15s as a CO(2) capturing agent was investigated in terms of adsorption capacity, adsorption-desorption kinetics, and thermodynamics. This work demonstrates apt amine types to catch CO(2) and regenerate the adsorbent, which may open new avenues to designing "CO(2) basket".     

Quantification of lurasidone, an atypical antipsychotic drug, in rat plasma with high-performance liquid chromatography with tandem mass spectrometry

A liquid chromatography–tandem mass spectrometric (LC/MS/MS) method was developed for the determination of an atypical antipsychotic drug, lurasidone, in rat plasma. The method involves the addition of acetonitrile and ziprasidone (internal standard) solution to plasma samples, followed by centrifugation. An aliquot of the supernatant was diluted with water and directly injected into the LC/MS/MS system. The separations were performed on a column packed with octadecylsilica (5 μm, 2.0 × 50 mm) with 0.1% formic acid and 0.1% formic acid in acetonitrile as mobile phase and the detection was performed using tandem mass spectrometry by multiple‐reaction monitoring via an electrospray ionization source. The standard curve was linear (r = 0.9982) over the concentration range 0.002–1 μg/mL. The intra‐ and inter‐assay precisions were 1.7 and 8.6%, respectively. The accuracy range was from 90.3 to 101.8%. The lower limit of quantification was 2.0 ng/mL using 50 μL of rat plasma sample. The developed analytical method was successfully applied to the pharmacokinetic study of lurasidone in rats. Copyright © 2011 John Wiley & Sons, Ltd.     

Electronic band structures and photovoltaic properties of MWO4 (M=Zn, Mg, Ca, Sr) compounds

Divalent metal tungstates, MWO₄, with wolframite (M=Zn and Mg) and scheelite (M=Ca and Sr) structures were prepared using a conventional solid state reaction method. Their electronic band structures were investigated by a combination of electronic band structure calculations and electrochemical measurements. From these investigations, it was found that the band structures (i.e. band positions and band gaps) of the divalent metal tungstates were significantly influenced by their crystal structural environments, such as the W-O bond length. Their photovoltaic properties were evaluated by applying to the working electrodes for dye-sensitized solar cells. The dye-sensitized solar cells employing the wolframite-structured metal tungstates (ZnWO₄ and MgWO₄) exhibited better performance than those using the scheelite-structured metal tungstates (CaWO₄ and SrWO₄), which was attributed to their enhanced electron transfer resulting from their appropriate band positions.     

Rhodamine-based chemosensing monolayers on glass as a facile fluorescent “turn-on” sensing film for selective detection of Pb

Rhodamine-based chemosensors 1 and 2 were synthesized and self-assembled onto glass surfaces for the selective fluorescent sensing of Pb²⁺. The immobilized chemosensors showed fluorescent responses that were turned-on with Pb²⁺ in CH₃CN, selectively over various metal ions. The Pb²⁺-selective fluorescent switch of the immobilized chemosensors was also reversible, allowing for repeated use for Pb²⁺ detection.