Catalytic one-pot synthesis of N-phenyl alkyl amides from alkene and aniline in the presence of cobalt on charcoal under carbon monoxide

N-Phenyl alkyl amides were synthesized by the cobalt on charcoal-catalyzed one-pot reaction of alkene and aniline under carbon monoxide; this is the first heterogeneous catalytic formation of N-phenyl alkyl amides.     

Photonic crystal fiber coupler

Fiber couplers made with photonic crystal fibers (PCF) are reported. Two types of PCF were fabricated by means of stacking a group of silica tubes around a silica rod and drawing them. The fiber couplers were made by use of the fused biconical tapered method. With a fiber that had five hexagonally stacked layers of air holes, a 33/67 coupling ratio was obtained, and with a one-layer four-hole fiber, a 48/52 coupling ratio was obtained. The fabrication processes and the characteristics of the PCFs and the PCF couplers are presented.     

An Iron-Free Magnetron-Injection-Gun for a 28GHz, 200kW Gyroklystron Amplifier

A design study of a double-anode magnetron-injection-gun is performed to incorporate the electron gun into a high power 28GHz gyroklystron amplifier operating at 70kV and 8.2A. The electron gun is designed to be used in a tapered magnetic field in the cathode region produced from an iron-free superconducting magnet. An electron trajectory code predicts a beam axial velocity spread of 5.9% at = 1.5, 70kV, 8.2A and 10.4kG, which is a high quality electron beam suitable for the high gain, high efficiency, five-cavity gyroklystron amplifier. The successful design of the high quality electron gun is attributed to a longer gap between the modulating anode and the grounded anode compared with the case of the first 28GHz electron gun built with an iron enclosed electromagnet.     

Origin of cathodic degradation and new phase formation at the La0.9Sr0.1MnO3/YSZ interface

New phase formation at the La_0.9Sr_0.1MnO₃/YSZ interface and its effects on the cathodic performances were studied at 900 °C in air. The resistance caused by the interfacial product layer kept increasing with time to reach up to 40% of the total resistance after 500 h. The interfacial product was identified as La₂Zr₂O₇ by XRD measurement. The electrical conductivity of La₂Zr₂O₇ (2.4 × 10⁻⁵ S cm⁻¹ at 1000 °C), measured by AC impedance and current interruption methods, was 4 to 7 orders of magnitude smaller than those of La_0.9Sr_0.1MnO₃ electrode or YSZ electrolyte. Either the electronic conductivity or the electrochemical O₂ reduction activity of La₂Zr₂O₇ was negligible. Combining these results, a conclusion was made that the cathodic degradation comes mainly from the growth of interfacial product layer and its contribution to the cell resistance increment is ohmic in nature.     

Nanomanipulator-assisted fabrication and characterization of carbon nanotubes inside scanning electron microscope

We have installed two nanomanipulators, which can travel about 20mm with a minimum increment of 1 nm, for manipulation of nanostructured materials inside field-emission scanning electron microscope (FE-SEM). Both manipulators render motions in x, y, and z directions, providing various manipulation freedoms such as moving, bending, cutting, and biasing. In addition, we have conducted in situ characterization of the electrical breakdown of multi-walled carbon nanotubes (MWCNTs). Our results demonstrate the possibility that MWCNTs can be used as a gas sensor.     

Release of N(2) from the carbon nanotubes via high-temperature annealing

Nitrogen (N)-doped carbon nanotubes (CNTs) were heated to 1000 degrees C under an ultrahigh vacuum. X-ray photoelectron spectroscopy (XPS) and X-ray absorption near-edge structure (XANES) reveal three different N structures; graphitelike, pyridine-like, and molecular N(2). The vibrationally resolved XANES peaks of N(2) were first observed, suggesting the existence of molecular N(2) as intercalated and trapped forms. The annealing process can decrease the average N content from 6.3 at. % to 3.3 at. %, mainly by releasing molecular N(2). Electron energy-loss spectroscopy (EELS) confirms that the annealing releases molecular N(2) from the CNTs.     

2,6-Bis[4-(p-dihexylaminostyryl)styryl]anthracene derivatives with large two-photon cross sections

[Structure: see text] Anthracene derivatives with a variety of donor-acceptor substituents have been synthesized and shown to exhibit large two-photon cross sections over a wide range of wavelengths.     

Torsional wave experiments with a new magnetostrictive transducer configuration

For the efficient long-range nondestructive structural health inspection of pipes, guided waves have become widely used. Among the various guided wave modes, the torsional wave is most preferred since its first branch is nondispersive. Our objective in this work is to develop a new magnetostrictive transducer configuration to transmit and receive torsional waves in cylindrical waveguides. The conventional magnetostrictive transducer for the generation and measurement of torsional waves consists of solenoid coils and a nickel strip bonded circumferentially to test pipes. The strip must be premagnetized by a permanent magnet before actual measurements. Because of the premagnetization, the transducer is not suitable for the long-term on-line monitoring of pipes buried underground. To avoid the cumbersome premagnetization and to improve the transduction efficiency, we propose a new transducer configuration using several pieces of nickel strips installed at 45 degrees with respect to the pipe axis. If a static bias magnetic field is also applied, the transducer output can be substantially increased. Several experiments were conducted to study the performance of the proposed transducer configuration. The proposed transducer configuration was also applied for damage detection in an aluminum pipe.     

Single-mode plane-polarized ytterbium-doped large-core fiber laser with 633-W continuous-wave output power

We demonstrate a cladding-pumped single-mode plane-polarized ytterbium-doped fiber laser generating 633 W of continuous-wave output power at 1.1 microm with 67% slope efficiency and a polarization extinction ratio better than 16 dB. The laser is end pumped through both fiber ends and shows no evidence of roll-over, even at the highest output power, which is limited only by the available pump power.