Determination of adsorptive properties of clay/water system: methylene blue sorption

In this study, adsorption of methylene blue onto clay was investigated. The effect of adsorption time and temperature on the adsorption process was studied. To reveal the adsorptive characteristics of the clay studied, porosity and BET surface area measurements were made. It was observed that the adsorption capacity decreases with increasing temperature, and adsorption equilibrium was attained within 1 h. It was found that the data fit well to Langmuir, Halsey, Henderson, and Harkins-Jura models but experimental data deviate significantly from BET and Freundlich models at especially high concentrations. Furthermore, isosteric adsorption enthalpy and entropy are calculated as -7.99 kJ mol(-1) and 25.41 JK(-1)mol(-1), respectively.     

DNA Hydrolysis by Homo- and Heteronuclear Cu(II)–Ni(II) Complexes of Two Diester-type Ligands

Nucleolytic activities of novel mononuclear Cu(II), homo- and heterodinuclear Cu(II)–Ni(II) complexes with two diester-type ligands were investigated on pCYTEXP by neutral agarose gel electrophoresis. The analyses of the cleavage products obtained electrophoretically indicate that the examined complexes induce very similar conformational changes on supercoiled DNA by converting supercoiled form to nicked form. At concentrations greater than 100M, the complexes possessed effective nucleolytic activities for 10min of incubation time. However, their nucleolytic activities did not increase significantly with longer periods of incubation. The pH-nucleolytic activity profiles of the complexes differed significantly. Metal complex induced DNA cleavage was also tested for inhibition by various radical scavengers. It could be proposed from the data that diffusible intermediate oxidants are not involved in these reactions or they are not necessary for DNA cleavage since none of antioxidants inhibited DNA cleaving activities of the complexes.     

Thermosensitive mucoadhesive gel formulation loaded with 5-Fu: cyclodextrin complex for HPV-induced cervical cancer

Human Papilloma Virus (HPV) infections are the major cause of cervical cancers. To achieve a better therapeutic efficacy and patient compliance in the treatment for HPV-induced cervical cancers, anticancer agent 5-fluorouracil has been formulated in a vaginal gel using the thermosensitive polymer Pluronic^® F127 together with alternative mucoadhesive polymers e.g., hyaluronic acid, Carbopol 934 and hydroxypropylmethylcellulose. To increase its aqueous solubility and to achieve the complete release of 5-FU from the gel, the drug was incorporated as its inclusion complex with 1:1 molar ratio with either β-cyclodextrin or hydroxypropyl-β-cyclodextrin. Following the characterization of drug:CD complexes, thermosensitive gel formulations containing different mucoadhesive polymers and the drug in free or complexed form were characterized in vitro by determining the gelation temperature and the rheological behavior of different formulations along with the in vitro release profiles of these formulations in pH 5.5 citrate buffer. It was observed that complexation with cyclodextrin accelerated the release of 5-FU with the exception of formulation containing Carbopol 934 as mucoadhesive polymer. As far as rheological properties are concerned, favorable thermosensitive in situ gelling properties were obtained with formulations containing HPMC as mucoadhesive polymer. Complete release of 5-FU from gels were obtained with both complexes of β-CD and HP-β-CD and cytotoxicity studies against HeLa human cervical carcinoma cells demonstrated that 1% 5-FU:CD complexes were equally effective as 1% free 5-FU indicating better therapeutic efficacy with lower dose.     

Are oxygen rings (On) and their negative ions (O) unstable?

Oxygen clusters of the equilateral ring types O_n and their negative ions O are studied by the recently developed pictorial-topological quantum chemistry method, VIF (valency interaction formulas), of this author. The species are found to be of high energy relative to separated oxygen atoms, the cause being evident from the VIF pictures. The odd n rings should be at local minima but are not likely to have observable negative ions. The even n rings have distortional instabilities, yet their negative ions are more likely to be observed as transients in beam experiments.     

New liquid chromatographic-chemometric approach for the determination of sunset yellow and tartrazine in commercial preparation

A new liquid chromatographic (LC)-chemometric approach was developed for the determination of sunset yellow (SUN) and tartrazine (TAR) in commercial preparations. This approach uses LC and chemometric calibration methods, i.e., classical least-squares (CLS), principal component regression (PCR), and partial-least squares (PLS), simultaneously. The combined LC-chemometric approaches, denoted as LC-CLS, LC-PCR, and LC-PLS, are based on photodiode array (PDA) detection at multiple wavelengths. Optimum chromatographic separation of SUN and TAR with allura red as the internal standard (IS) was obtained by using a Waters Symmetry C18 column, 5 microm, 4.6 x 250 mm, and 0.2 M acetate buffer (pH 5)-acetonitrile-methano-bidistilled water (55 + 20 + 15 + 10, v/v) as the mobile phase at a flow rate of 1.9 mL/min. The LC data sets consisting of the ratios of analyte peak areas to the IS peak area were obtained by using PDA detection at 5 wavelengths (465, 470, 475, 480, and 485 nm). LC-chemometric calibrations for SUN and TAR were separately constructed by using the relationship between the peak-area ratio and the training sets for each colorant. LC-chemometric approaches were tested for different synthetic mixtures containing SUN and TAR in the presence of the IS. These LC-chemometric calibrations were applied to a commercial preparation of the 2 colorants. The experimental results of the LC-chemometric approaches were compared with those obtained by a developed classical LC method using single-wavelength detection.     

新试剂N-苯基-N′-(氨基对苯磺酸钠)硫脲的合成及其在微量金(Ⅲ)测定中的应用

介绍了新试剂N 苯基 N′ (氨基对苯磺酸钠 )硫脲 (PPT)的合成方法。并研究了与金的显色条件 ,建立了光度法测定微量金的新方法。在pH 5 .0～ 5 8的HAc NaAc缓冲体系中 ,在溴化十六烷基三甲胺 (CTMAB)存在下 ,Au(Ⅲ )与PPT形成组成比 1∶3的黄色水溶性络合物 ,其最大吸收峰位于 31 7.0nm ,表观摩尔吸光系数ε=3.68× 1 0 4 L/mol·cm ,Au(Ⅲ )含量在 0～ 80 μg/2 5mL范围内服从比尔定律。     

Surface properties of Reactive Yellow 2 immobilised pHEMA and HEMA/chitosan membranes: characterisation of their selectivity to different proteins

Poly(hydroxyethyl methacrylate), pHEMA, and a composite pHEMA/chitosan networks were synthesized in the membrane form via UV initiated photo-polymerisation in the presence of an initiator ,′-azoisobutyronitrile. Reactive Yellow 2 (RY-2) was covalently immobilised as a dye–ligand onto both membranes. The polarity and surface energy of the investigated membranes were determined by contact angle measurement. The incorporation of chitosan in the pHEMA networks produced more hydrophilic surface, as indicated by contact angle analysis. The binding characteristics of lysozyme, γ-globulins, human serum albumin (HSA) and bovine serum albumin (BSA) to pHEMA-RY-2 and pHEMA/chitosan-RY-2 affinity membranes have been investigated from aqueous solution and their dye–ligand free forms were used as control systems. When chitosan was incorporated in the pHEMA network as a cationic polymer led to higher adsorption capacity for the lysozyme. Selective adsorption behaviour was also observed in the case of pHEMA/chitosan-RY-2 membrane for the lysozyme. The non-specific adsorptions of the lysozyme on the pHEMA and pHEMA/chitosan membranes were about 1.9 and 7.2 mg/ml, respectively. These were negligible for all others investigated proteins. The lysozyme adsorption data was analysed using the first-order and the second-order models. The first-order equation in both affinity membrane systems is the most appropriate equation to predict the adsorption capacities of the adsorbents. The adsorption isotherms well fitted the combined Langmuir–Freundlich model. A theoretical analysis has been conducted to estimate the thermodynamic contributions (changes in enthalpy, entropy and Gibbs free energy) for the adsorption of lysozyme to both dye–ligand immobilised membranes. The adsorption capacities of both dye–ligand immobilised membranes increased with increasing the temperature while decreased with increasing the NaCl concentration. Both affinity membranes are stable when subjected to sanitization with sodium hydroxide after repeated separation–elution cycles.     

Characterization of glucoamylase immobilized on celite

Immobilization of glucoamylase (EC 3.2.1.3) on Celite R649 bio-catalyst carrier for hydrolysis of maltose and maltodextrin has been investigated in both packed bed and recirculated batch reactors. The kinetics parameters on the hydrolysis of maltose were estimated from the packed bed reactor. It is found that this immobilized enzyme is as efficient as the soluble enzyme in catalyzing hydrolysis of maltose. However, it is less efficient than the soluble enzyme in hydrolyzing 30% (w/v) maltodextrin, giving a maximum dextrose equivalent (DE) value of 96.0% instead of 98.2%.     

Preconcentration and speciation of chromium using a melamine based polymeric sequestering succinic acid resin: its application for Cr(VI) and Cr(III) determination in wastewater

A new melamine based polymeric sequestering resin was prepared for preconcentration and separation of hexavalent chromium from water, and its sequestering action was investigated. The water-insoluble, cross-linked sequestering resin was formed by reaction with bromosuccinic acid and cross-linking of melamine. The active sequestering group on the resin is NH-(Succinic acid) or salt thereof. The resulting chelating resin was characterized by infrared spectra. The newly prepared resin quantitatively retained Cr(VI) at pH 2.0-4.0 when the flow rate was maintained between 1 and 5 ml min⁻¹. The retained Cr(VI) was instantaneously eluted with 25 ml of 0.1 M NaOH. The chromium species were determined by a flame atomic absorption spectrometer. The limits of detection for Cr(VI) and Cr(III) were found to be 5.3 and 4.2 μg l⁻¹, respectively. The precision and accuracy of the proposed procedure was checked by the use synthetic and reference steel samples. The established preconcentration method was successfully applied to the determination and selective separation of Cr(VI) in electroplating industry wastewater. Total concentrations determined by the spectrophotometric method (110.3±0.6 g l⁻¹ Cr(VI) and 1.2±0.3 g l⁻¹ Cr(III)) are compared with those found by FAAS and the obtained results (110.4±1.8 g l⁻¹ Cr(VI) and 1.4±0.5 g l⁻¹ Cr(III)) show good agreement.     

The synthesis and characterization of a new (<Emphasis Type="Italic">E,E</Emphasis>)-dioxime containing 13-membered dithiadiazamacrocyclic moieties and its mononuclear complexes

A new (E,E)-dioxime, (6Z,7Z)-15,16-dihydro-14H-dibenzo[b,h][1,10,4, 7]dithiadiazacyclotride-cine-6,7(5H,8H)-dionedioxime (H ₂ L) has been synthesized by reacting cyanogen-di-N-oxide (2) with 2,2′-[propane-1,3-diylbis(thio)]dianiline (1). Mononuclear complexes (4) and (5) of this ligand have been synthesized by reacting the vic-dioxime (H₂L) with NiCl₂ · 6H₂O and CoCl₂ · 6H₂O, respectively. The BF ₂ ⁺ capped Ni(II) and Co(III) complexes (6) and (7) of the dioxime have been synthesized from (4) and (5). The new compounds were characterized by a combination of elemental analysis, ¹H- and ¹³C-n.m.r, i.r. and m.s. spectral data.