Preparation and mass spectrometric study of egg yolk antibody (IgY) against rabies virus

Rabies virus was used as the antigen to immunize laying chickens. Anti-rabies virus immunoglobulin Y(IgY) was isolated from yolks of the eggs laid by these chickens using a two-step salt precipitation and one-step gel filtration protocol. The purified IgY was reduced with dithiothreitol, and heavy chains (HC) and light chains (LC) were obtained. In addition, the purified IgY was digested with pepsin and the fragment with specific antigen binding properties (Fab) was produced. Using matrix-assisted laser desorption/ionization mass spectrometry (MALDI-TOFMS), the average molecular weights of IgY, HC, LC, and Fab were determined as 167 250, 65 105, 18 660, and 45,359 Da, respectively. IgY has two structural differences compared with mammalian IgGs. First, the molecular weight of the heavy chain of IgY is larger than that of its mammalian counterpart, while the molecular weight of the light chain of IgY is smaller. Second, upon pepsin digestion, anti-rabies virus IgY is degraded into Fab, in contrast to mammalian IgG, which has been reported to be degraded into F(ab')(2) under the same conditions.     

Molecular cloning and expression of an endo-β-1,4-d-glucanase I (avicelase I) gene from Bacillus cellulyticus K-12 and characterization of the recombinant enzyme

Bacillus cellulyticus K-12 Avicelase (Avicelase I; EC 3.2.1.4) gene (ace A) has been cloned in Escherichia coli by using the vector pT7T3U19 and HindIII-HindIII libraries of the chromosomal inserts. The libraries were screened for the expression of avicelase by monitoring the immunoreaction of the antiavicelase (immunoscreening). Positive clones (Ac-3, Ac-5, and Ac-7) contained the identical 3.5-kb HindIII fragment as determined by restriction mapping and Southern hybridization, and expressed avicelase efficiently and constitutively using its own promoter in the heterologous host. From the immunoblotting analysis, a polypeptide that showed a carboxymethylcellulase (CMCase) activity with an M _r , of 64,000 was detected. The recombinant endo 1,4-β- _d -glucanase I was purified to homogeneity from an intracellular fraction of E. coli by DEAE-Toyopearl M650, Phenyl Toyoperal M650, and TSK gel HW50S chromatography. The enzyme had a monomeric structure, its relative molecular mass being 65 kDa by gel filtration and 64 kDa by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. The pI was 5.3 and the optimal pH was 4.6, and the enzyme was stable at pH 4.0–10.5. The enzyme had a temperature optimum of 50°C and was stable at 55°C for 48 h, and retained approx 20% of its activity after 30 min at 70°C. It showed high activity toward carboxymethylcellulose (CMC) as well as p-nitrophenyl-β-d-cellobioside, 4-methylumbelliferyl cellobioside, Avicel, filter paper, and some cellooligosaccharides. K _m values for CMC and Avicel were 7.6 and 85.2 mg/mL, respectively, whereas V _max values were 201 and 9.2 μmol · min⁻¹ · mg⁻¹, respectively. Cellotetraose (G4) was preferentially cleaved into cellobiose (G2) and cellopentaose (G5) was cleaved into G2 + cellotriose (G3), whereas cellohexaose (G6) was cleaved into G4 + G2 and, to a lesser extent, into G3 + G3. G3 was not cleaved at all. G2 was the main product of Avicel hydrolysis. G2 inhibited whereas Mg⁺⁺ stimulated the activity of CMCase and Avicelase. Hydrolysis of CMC took place with a rapid decrease in viscosity but a slow liberation of reducing sugars. Based on these results, it appeared that the cellulase should be regarded as endo type, although it hydrolyzed Avicel.     

Ti基IrO2＋Ta2O5阳极在H2SO4溶液中的电解时效行为

研究了450 ℃制备所得Ti/70％IrO2 30％Ta2O5（摩尔分数）高寿命阳极在H2SO4溶液电解过程中电极的物理、化学及电化学性能的时效行为.结果发现，整个电解过程可分为“活化”、“稳定”及“失效”三个阶段.在“活化”及“稳定”区内主要发生电极表面活性氧化物的溶解，涂层中IrO2金红石相的（110）、（101）晶面择优取向随电解时间延长而减弱，而（002）晶面择优增强.但是在“失效区”内，各晶面的择优程度却不随电解时间的变化而变化，这表明在“失效区”内氧化物的损失机制发生了变化.电化学阻抗谱测试表明，电极的析氧电化学反应电阻随电解时间的延长发生缓慢而连续的上升，而整个电极的物理阻抗在“失效区”内却发生突升现象.X射线衍射分析（XRD）表明，随电解时间的延长TiO2金红石相的衍射强度增大，达“失效区”时衍射强度发生突升.根据实验现象特别是“失效区”内阳极的时效行为提出高寿命Ti基氧化物涂层阳极的失效机制.     

Developing soluble polymers for high-throughput synthetic chemistry

Soluble polymers have emerged as viable alternatives to resin supports across the broad spectrum of high-throughput organic chemistry. As the application of these supports become more widespread, issues such as broad-spectrum solubility and loading are becoming limiting factors and therefore new polymers are required to overcome such limitations. This article details the approach made within our group to new soluble polymer supports and specifically focuses on parallel libraries of block copolymers, de novo poly(styrene-co-chloromethylstyrene), PEG- stealth stars, and substituted poly(norbornylene)s.     

Amperometric Glucose Biosensor Based on Glucose Oxidase Encapsulated in Carbon Nanotube–Titania–Nafion Composite Film on Platinized Glassy Carbon Electrode

A highly sensitive and selective glucose biosensor has been developed based on immobilization of glucose oxidase within mesoporous carbon nanotube–titania–Nafion composite film coated on a platinized glassy carbon electrode. Synergistic electrocatalytic activity of carbon nanotubes and electrodeposited platinum nanoparticles on electrode surface resulted in an efficient reduction of hydrogen peroxide, allowing the sensitive and selective quantitation of glucose by the direct reduction of enzymatically‐liberated hydrogen peroxide at ?0.1 V versus Ag/AgCl (3 M NaCl) without a mediator. The present biosensor responded linearly to glucose in the wide concentration range from 5.0×10^?5 to 5.0×10^?3 M with a good sensitivity of 154 mA M^?1cm^?2. Due to the mesoporous nature of CNT–titania–Nafion composite film, the present biosensor exhibited very fast response time within 2 s. In addition, the present biosensor did not show any interference from large excess of ascorbic acid and uric acid.     

Comparative characterization study of microporous carbons by HRTEM image analysis and gas adsorption

The present work presents a useful comparison of micropore size distributions (MPSDs) obtained from gas adsorption and image analysis of high-resolution transmission electron micrographs. It is shown that the MPSD obtained for a chemical activated carbon is concordant with that obtained from CO2 adsorption. In addition, this technique has allowed us to obtain the MPSD of a carbon molecular sieve (CMS) prepared in our laboratory by a copyrolysis process, which could only be characterized by CO2 adsorption at 273 K (not by N2 adsorption at 77 K due to diffusional problems). The MPSD obtained by high-resolution transmission electron microscopy (HRTEM) for the CMS is wider than that obtained by CO2 adsorption, suggesting that HRTEM is detecting the closed porosity existing in this sample, which is not accessible to gas adsorption. The existence of closed porosity in the CMS is explained considering the preparation method used. Thus, HRTEM combined with image analysis seems to be useful for structural analysis of narrow micropores including closed porosity.     

catena‐Poly[[diiodo­zinc(II)]‐μ‐4,4′‐bipyridine‐κ2N:N′]

The title compound, [ZnI₂(bipy)]_n (bipy is 4,4′‐bipyridine, C₁₀H₈N₂), has been prepared by the hydro­thermal reaction of ZnI₂ and bipy at 433 K. Each Zn atom is coordinated by two N atoms from two different bipy ligands and by two I atoms in a distorted tetra­hedral geometry, with Zn—N distances ranging from 2.068 (7) to 2.101 (8) Å and Zn—I distances ranging from 2.5471 (13) to 2.5673 (13) Å. The mol­ecular structure features a zigzag polymeric chain. Face‐to‐face π–π stacking inter­actions between adjacent bipy ligands stabilize the structure.     

Two organometallic fragments inclusioned in a 1,3-alternate calix[4]arene tetraphosphane: evidence for transition metal-arene interaction through the cavity

The preparation of an 1,3-alternate calix[4]arene tetraphosphane ligand, 25,26,27,28-tetrakis{2-(diphenylphosphino)ethoxy}calix[4]arene (4), is described. Ligand 4 is obtained in four steps in 17% overall yield. Reaction of 4 with AgBF4 produced the encapsulated two silver complex [Ag2{(P,P,P,P)-tetraphencalix[4]arene}](BF4)2. The solid-state structure shows that the encapsulated silver undergoes a substantial pi-interaction by two opposite arene rings. Rhodation of 4 employing [Rh(cot)2]BF4 yielded the encapsulated complex with a bent coordination mode. Two organometallic fragments inclusioned inside a 1,3-alternate calix[4]arene tetraphosphane was also achieved by the reaction of 4 with [PtH(PPh3)2 (thf)]+. Full characterization includes X-ray structural studies of compounds 4-6.