HPLC post column derivatization of aromatic amines usingN-methyl-9-chloroacridinium triflate

An HPLC post column chemical derivatization procedure based on the interaction between an acridinium triflate and amines to form highly colored derivatives on-line is described for the determination of aromatic amines. Benzocaine and butesin, local anesthetic agents that contain the aromatic amine group, were used as model compounds. Reversed-phase HPLC conditions were developed for both the separation of analytes and the reaction between analytes and the acridinium triflate in the system. Three-dimensional knitted teflon shape coils and the internal diameter and length of the coils were important parameters in reducing band broadening and background noise.N-Methyl-9-chloroacridinium triflate was shown to be applicable to the determination of primary aromatic amines, selected secondary aromatic amines, hydrazides, and hydrazines. Application of the on-line chemical derivatization procedure to the analysis of pharmaceutical dosage forms containing procainamide (primary aromatic amine), isoniazid (hydrazide), and hydralazine (hydrazine) is also described.     

Synthesis of directly linked zinc(II) porphyrin-imide dyads and energy gap dependence of intramolecular electron transfer reactions

A series of zinc(II) porphyrin-imide dyads (ZP-Im), in which an electron donating ZP moiety is directly connected to an electron accepting imide moiety in the meso position, have been prepared for the examination of energy gap dependence of intramolecular electron transfer reactions with large electronic coupling. The nearly perpendicular conformation of the imide moiety towards the porphyrin plane has been revealed by Xray crystal structures. The energy gap for charge separation, 1ZP* - Im --> ZP+ - Im-, is varied by changing the electron accepting imide moiety to cover a range of about 0.8 eV in DMF. Definitive evidence for electron transfer has been obtained in three solvents (toluene, THF, and DMF) through picosecond-femtosecond transient absorption studies, which have allowed us to determine the rates of photoinduced charge separation, 1ZP* - Im --> ZP+ - Im-, and subsequent thermal charge recombination ZP+ - Im- --> ZP - Im. The free-energy gap dependence (energy gap law) has been probed from the normal to the nearly top region for the charge separation rate alone, and only the inverted region for the charge recombination rate. Although both of the energy gap dependencies can be approximately reproduced by means of the simplified semiclassical equation, when we take into consideration the effect of the high frequency vibrations replaced by one mode of averaged frequency, many features, including the effects of solvent polarity and the electron tunneling matrix element on the energy gap law, differ considerably from those of the previously studied porphyrin-quinone systems, which have weaker interchromophore electronic interactions.     

High levels of soluble herpes virus entry mediator in sera of patients with allergic and autoimmune diseases

Herpes virus entry mediator (HVEM) is a newly discovered member of the tumor necrosis factor receptor (TNFR) superfamily that has a role in herpes simplex virus entry, in T cell activation and in tumor immunity. We generated mAb against HVEM and detected soluble HVEM (SHVEM) in the sera of patients with various autoimmune diseases. HVEM was constitutively expressed on CD4(+) and CD8(+) T cells, CD19(+) B cells, CD14(+) monocytes, neutrophils and dendritic cells. In three-way MLR, mAb 122 and 139 were agonists and mAb 108 had blocking activity. An ELISA was developed to detect sHVEM in patient sera. sHVEM levels were elevated in sera of patients with allergic asthma, atopic dermatitis and rheumatoid arthritis. The mAbs discussed here may be useful for studies of the role of HVEM in immune responses. Detection of soluble HVEM might have diagnostic and prognostic value in certain immunological disorders.     

Profiling and screening analysis of 27 aromatic amino acids by capillary electrophoresis in dual modes

An efficient capillary electrophoretic (CE) profiling and screening system based on dual modes of capillary zone electrophoresis (CZE) and micellar electrokinetic capillary chromatography (MEKC) was developed for the simultaneous determination of 23 nonprotein amino acids (NPAAs) and 4 protein amino acids with aromatic moiety. It involves separation by an uncoated fused-silica capillary under phosphoric acid buffer in CZE mode and by another uncoated fused-silica capillary under neutral sodium dihydrogen phosphate buffer containing sodium dodecyl sulfate in MEKC mode. Migration orders of the amino acids studied on the two separation modes under each optimum condition were very different. The repeatability of migration times measured by the CZE and MEKC was found to be better than 4.8 and 3.4%, respectively, thereby enabling to cross-check the identification of each amino acid. The method linearity and limit of detection of the CZE for each amino acid were found to be adequate for the assay of aromatic amino acids. When the present CE profiling and screening analysis in dual modes was applied to plant seeds, NPAAs such as mimosine from Mimosa pudica Linné, and 2-phenylglycine from Lindera erythrocarpa Makino were positively detected along with tryptophan, phenylalanine and tyrosine.     

Formation of photo-functional spiroxazine monolayers and their dielectric constant determination using surface plasmon resonance

Spiroxazine are of considerable interest as photochromic materials because of their application. On the other hand, surface plasmon resonance (SPR) is a well-known optical method for measuring optical constants of thin film. In this study, photochromic materials were used as self-assembled monolayers (SAMs) of newly synthesized spiroxazine derivatives. We used Fresnel equation (four-layer model) to determine the precise dielectric constant () of the photochromic monolayers. Structure changes of spiroxazine derivatives under UV-light irradiation resulted in the change of optical constants, the dielectric constant and thickness. The obtained results indicated that the ring opening of photochromic spiroxazine can lead to the decrease in the dielectric constant and thickness.     

Determination of Glimepiride in Human Plasma by LC-MS-MS and Comparison of Sample Preparation Methods for Glimepiride

A sensitive and selective method for quantitation of glimepiride in human plasma was established using liquid chromatography-electrospray ionization tandem mass spectrometry. Three different methods for the sample preparation of glimepiride and an internal standard were investigated (liquid-liquid extraction, solid-phase extraction and protein precipitation). Glipizide was used as an internal standard. Compounds were separated on a C₁₈ column with 80% acetonitrile and 20% deionized water (adjusted to pH 3.5 with acetic acid), as mobile phase at a flow rate of 200 L min^–1. By use of multiple reaction monitoring mode in MS-MS with liquid-liquid extraction and solid-phase extraction, glimepiride and glipizide were detected without severe interference from the human plasma matrix. Glimepiride produced a protonated precursor ion ([M+H]⁺) at m/z 491 and a corresponding product ion at m/z 352, and the internal standard produced a protonated precursor ion ([M+H]⁺) at m/z 446 and a corresponding product ion at m/z 321. The limit of quantitation was 0.1 ng mL^–1, 0.5 ng mL^–1 and 1.0 ng mL^–1 when using liquid-liquid extraction, solid-phase extraction and protein precipitation, respectively. The validation, reproducibility, stability, and recovery of the different sample preparation methods were comparable and all the methods gave reliable results. The method has been successfully applied to pharmacokinetic study of glimepiride in human plasma.     

Isolation of a potent anti-MRSA sesquiterpenoid quinone from Ulmus davidiana var. japonica

A highly potent anti-MRSA sesquiterpenoid has been isolated from Ulmus davidiana var. japonica, which has been traditionally used to treat infectious diseases in Korea. This naturally occurring antibiotic was identified as mansonone F (1). This compound has been found to be highly active specifically against MRSA and showed an MIC range of 0.39-3.13 microg/ml which is comparable to that of vancomycin.     

Sample preparation for the analysis of flavors and off-flavors in foods

Off-flavors in foods may originate from environmental pollutants, the growth of microorganisms, oxidation of lipids, or endogenous enzymatic decomposition in the foods. The chromatographic analysis of flavors and off-flavors in foods usually requires that the samples first be processed to remove as many interfering compounds as possible. For analysis of foods by gas chromatography (GC), sample preparation may include mincing, homogenation, centrifugation, distillation, simple solvent extraction, supercritical fluid extraction, pressurized-fluid extraction, microwave-assisted extraction, Soxhlet extraction, or methylation. For high-performance liquid chromatography of amines in fish, cheese, sausage and olive oil or aldehydes in fruit juice, sample preparation may include solvent extraction and derivatization. Headspace GC analysis of orange juice, fish, dehydrated potatoes, and milk requires almost no sample preparation. Purge-and-trap GC analysis of dairy products, seafoods, and garlic may require heating, microwave-mediated distillation, purging the sample with inert gases and trapping the analytes with Tenax or C18, thermal desorption, cryofocusing, or elution with ethyl acetate. Solid-phase microextraction GC analysis of spices, milk and fish can involve microwave-mediated distillation, and usually requires adsorption on poly(dimethyl)siloxane or electrodeposition on fibers followed by thermal desorption. For short-path thermal desorption GC analysis of spices, herbs, coffee, peanuts, candy, mushrooms, beverages, olive oil, honey, and milk, samples are placed in a glass-lined stainless steel thermal desorption tube, which is purged with helium and then heated gradually to desorb the volatiles for analysis. Few of the methods that are available for analysis of food flavors and off-flavors can be described simultaneously as cheap, easy and good.     

Biocompatible polymers for antibody support on gold surfaces

The elimination or minimization of non-specific protein adsorption from serum is critical for the use of surface plasmon resonance (SPR) sensors for in vitro and in vivo analysis of complex biological solutions. The ultimate goals in this application are to minimize non-specific adsorption of protein and to maximize analyte signal. A reduction of the non-specific protein adsorption from serum of up to 73% compared to carboxymethylated-dextran 500 kDa (CM-dextran) was achieved following a survey of eight biocompatible polymers and 10 molecular weights of CM-dextran. These coatings minimize non-specific adsorption on the sensor while also serving as immobilization matrices for antibody fixation to the probes. Polymers including polysaccharides: CM-dextrans, CM-hyaluronic acid, hyaluronic acid, and alginic acid were investigated. Humic acid, polylactic acid, polyacrylic acid, orthopyridyldisuldfide–polyethyleneglycol–N-hydroxysuccinimide (OPSS–PEG–NHS), and a synthesized polymer; polymethacrylic-acid-co-vinyl-acetate (PMAVA) were also used. The non-specific protein adsorption reduction was measured over a 14 day period at 0 °C for each polymer. Calibration curves using some of these polymers were constructed to show the performance and low detection limit possibilities of these new antibody supports. For many of the polymers, this is the first demonstration of employment as an antibody support for an optical or surface active sensor. CM-dextran is the polymer offering the largest signal for the antigen detection. However, the biocompatible polymers demonstrate a greater stability to non-specific binding in serum. These biocompatible polymers offer different alternatives for CM-dextran.     

Efficient chemoselective deprotection of silyl ethers using catalytic 1-chloroethyl chloroformate in methanol

Fast and chemoselective desilylation of silyl-protected alcohols was achieved using a catalytic amount of 1-chloroethyl chloroformate in methanol. With a minimal amount of 1-chloroethyl chloroformate as the source for anhydrous HCl, extremely efficient cleavage of silyl ethers of primary and secondary alcohols was accomplished, and chemoselective deprotection of one silyl ether in the presence of another silyl or other acid-labile group was possible through controlling the amount of the chloroformate and reaction time.