Bisbakuchiols A and B, novel dimeric meroterpenoids from Psoralea corylifolia

Two novel dimeric meroterpenoids, bisbakuchiols A and B, along with (S)-bakuchiol were isolated from the seeds of Psoralea corylifolia L. (Fabaceae). Bisbakuchiols A and B contain an unprecedented dimeric meroterpenoid skeleton in which two meroterpenes are linked through a dioxane bridge. All compounds were evaluated for their potential to inhibit hypoxia-inducible factor-1 (HIF-1) activation induced by hypoxia in a HIF-1-mediated reporter gene assay in AGS human gastric cancer cells. (S)-Bakuchiol inhibited hypoxic activation of HIF-1 with an IC₅₀ value of 6.1 μM.     

Bis induces growth inhibition and differentiation of HL-60 cells via up-regulation of p27

Bis (Bag-3, CAIR), a Bcl-2-interacting protein, promotes the anti-apoptotic activity of Bcl-2 and increased levels of Bis have been observed in several disease models. The involvement of Bcl-2 and some Bcl-2-binding proteins in differentiation has recently been reported. However, the relevance of Bis to cellular differentiation remains unknown. The findings herein show that Bis expression is up-regulated during the differentiation of HL-60 cells. To investigate the effect of Bis expression on differentiation, we established Bis-overexpressing HL-60 cells (HL-60-bis). HL-60-bis cells have a low nuclear: cytoplasmic ratio and indented nucleus in Wright- Giemsa staining, and an increased expression of CD11b in immunofluorescence study, indicating the promotion of differentiation. The overexpression of Bis also resulted in a retarded cell growth rate, accompanied by the accumulation of HL-60 cells at the G0/G1 phase of the cell cycle, which was sustained during the differentiation process. Western blot analysis revealed that the expression of p27, a representative inducer of cell cycle arrest at the G1 phase, was increased 2.5-fold in HL-60-bis cells compared to HL-60-neo cells. These results suggest that the Bis induced growth inhibition of HL-60 cells promotes G0/G1 phase arrest via up-regulation of p27, which seems to be a prerequisite for differentiation. Further studies will be required to define the exact roles of Bis on cellular differentiation more precisely.     

Quantitative analyses of shape-selective intercalation of isomeric mixtures of muconates into [LiAl2(OH)6]Cl.yH2O layered double hydroxide

Quantitative investigation of the shape selectivity for the competitive intercalation reaction of isomeric mixtures in the interlayer of LDH was achieved by analyzing the solid phases synthesized by the reaction of [LiAl(2)(OH)(6)]Cl.yH(2)O with various compositional mixtures of (E,E)- and (Z,Z)-muconates. The apparent partition constant K' for the anion-exchange reaction between (E,E)- and (Z,Z)-muconates was quite dependent on the mole fraction of muconates in solution. The only single phase saturated with [LiAl(2)(OH)(6)](2)[(E,E)-C(6)H(4)O(4)].zH(2)O could be obtained in the range of the initial mole fraction of (E,E)-muconate larger than 0.6 in the starting solution, while mixed phases intercalated with (E,E)- and (Z,Z)-muconates could be obtained at lower mole fractions of (E,E)-muconate. The shape selectivity for the competitive reaction of two muconates on the [LiAl(2)(OH)(6)](+) lattice could be ascribed to thermodynamic processes, and the conditions under which that pure (E,E)-muconate was efficiently separated from isomeric mixtures of two muconates were successfully evaluated.     

Application of an integrated microchip system with capillary array electrophoresis to optimization of enzymatic reactions

In this work, a combination of complementary metal-oxide semiconductor (CMOS) microchip system with capillary array electrophoresis (CAE) is demonstrated as a system for optimizing conditions for enzymatic reaction. Dimethylacridinone (DDAO)-phosphate substrate and alkaline phosphatase conjugate were selected for the enzymatic reaction, which was applicable to the enzyme-linked immunosorbent assay (ELISA) technique. Laser-induced fluorometry with a miniature semiconductor laser was used to detect the enzymatic products. The speed of the enzymatic reaction between the DDAO-phosphate and the alkaline phosphatase conjugate was investigated as a function of reaction time. The microchip-CAE detection system could determine the pH condition and the concentration of enzyme that are suitable for rapid and low-cost analysis. This result shows the feasibility of using the microchip-CAE system for application to miniaturized screening systems.     

Miniature biochip system for detection of Escherichia coli O157:H7 based on antibody-immobilized capillary reactors and enzyme-linked immunosorbent assay

In this work, we report Escherichia coli O157:H7 detection using antibody-immobilized capillary reactors, enzyme-linked immunosorbent assay (ELISA), and a biochip system. ELISA selective immunological method to detect pathogenic bacteria. ELISA is also directly adaptable to a miniature biochip system that utilizes conventional sample platforms such as polymer membranes and glass. The antibody-immobilized capillary reactor is a very attractive sample platform for ELISA because of its low cost, compactness, reuse, and ease of regeneration. Moreover, an array of capillary reactors can provide high-throughput ELISA. In this report, we describe the use of an array of antibody-immobilized capillary reactors for multiplex detection of E. coli O157:H7 in our miniature biochip system. Side-entry laser beam irradiation to an array of capillary reactors contributes significantly to miniaturized optical configuration for this biochip system. The detection limits of E. coli O157:H7 using the ELISA and Cy5 label-based immunoassays were determined to be 3 and 230 cells, respectively. This system shows capability to simultaneously monitor multifunctional immunoassay and high sensitive detection of E. coli O157:H7.     

Modeling of the Permeate Flux during Microfiltration of BSA-Adsorbed Microspheres in a Stirred Cell

A study on the variation of the permeate flux was performed in a stirred cell charged with microspheres, to investigate the effects of the stirrer speeds (300, 400, and 600 rpm) and the BSA concentration (0.1, 0.2, 0.4, and 0.8 g/L) under constant pressure. The permeate flux increased over time before the saturation point, but it began to decrease after that point. An increase of the BSA concentration and the stirrer speed resulted in the rapid increase of the permeate flux. This is contrary to the observation of the conventional filtration experiments using a stirred cell. A resistance-in-series model was employed for the modeling of the permeate flux. The cake resistance (R(c), induced by the concentration polarization of microspheres) and the fouling resistance (R(f), induced by the adsorption of BSA inside the membrane pore) must be considered simultaneously for the modeling. These modeling results were in good agreement with the experimental data. These can be applied to the special system considering both R(c) and R(f) as well as the general filtration systems using a stirred cell. Copyright 2000 Academic Press.     

Anomalies in the asymmetric hydroboration of olefins with the 11 adduct of (+)-α-pinene and BH3 · THF

The hydroboration of cis-2-butene and cis-3-hexene with pure diisopinocampheylborane (IPC₂BH) and monoisopinocampheylborane (IPCBH₂), both prepared from (+)-α-pinene, were studied. In contrast to IPC₂BH, which yielded R-(?)-2-butanol and R-(?)-3-hexanol in 98.4 and 94.5% optical purities, IPCBH₂ yielded S-(+)-2-butanol and S-(+)-3-hexanol in 23.6 and 19.7% optical purifies respectively. PMR examination of the methanolyzed products were utilized to establish the species present in the freshly prepared and aged $\text{1}\text{1}$ adduct from (+)-α-pinene and BH₃ · THF. The results confirm the interpretation previously advanced for the major differences realized in asymmetric hydroboration with the fresh and aged $\text{1}\text{1}$ adducts.     

A boundary element method for molecular electrostatics with electrolyte effects

A boundary element method is developed to compute the electrostatic potential inside and around molecules in an electrolyte solution. A set of boundary integral equations are derived based on the integral formulations of the Poisson equation and the linearized Poisson-Boltzmann equation. The boundary integral equations are then solved numerically after discretizing the molecular surface into a number of flat triangular elements. The method is applied to a spherical molecule for which analytical solutions are available. Use is made of both constant and linearly varying unknowns over the boundary elements, and the method is tested for various values of parameters such as the dielectric constant of the molecule, ionic strength, and the location of the interior point charge. The use of the boundary integral method incorporating the nonlinear Poisson-Boltzmann equation is also briefly discussed.     

Preparation of a thermally phase-separating copolymer,poly(N-isopropylacrylamide-co-N-acryloxysuccinimide), with a controlled number of active esters per polymer chain

N-isopropylacrylamide and N-acryloxysuccinimide have been copolymerized in various mixtures of terrahydrofuran and toluene using azobisisobutyronitrile as initiator. Polymerization has been conducted for 24 h at 50°C under a slightly positive pressure of nitrogen. The copolymers were assayed for active ester content by measuring the UV absorbance (259 nm) of N-hydroxysuccinimide anion, generated by reacting the copolymers with N-isopropylamine in dimethylformamide and dissolving the resulting mixture in 0.1M HEPES buffer, pH 7.5. The molecular weight and its distribution have been estimated by gel permeation chromatography. The active ester content was found to be equivalent to the comonomer feed ratio, and the major factor controlling the molecular weight was the ratio of tetrahydrofuran to toluene. Thus, the number of active esters per polymer chain could be controlled by adjustment of the comonomer feed ratio and the ratio of tetrahydrofuran to toluene. Monomer reactivity ratios for copolymerization of N-isopropylacrylamide with N-acryloxysuccinimide were also estimated. These copolymers are useful for immobilizing binding ligands such as antibodies for subsequent thermally induced precipitation immunoassays and bioseparation processes.