A comparative study of the complexation of Am(III) and Eu(III) with TODGA in room temperature ionic liquid

On the growing awareness of the environmental impact associated with the use of volatile organic diluents, room temperature ionic liquid gained world-wild acceptance as environmentally benign diluents for actinide partitioning. The observed unusual behavior of less extraction efficiency of Eu with TODGA in RTIL in comparison with that of Am-TODGA was addressed in this paper. The stoichiometry of Am-TODGA complex was found to be 1:2 while that of Eu-TODGA was 1:1. More the ligand molecules associated in the metal ligand complex, the organophilicity of the complex will be more and the solubility of the metal–ligand complex in RTIL will be more which reflects in the higher distribution ratio for Am. In RTIL both Am and Eu showed slower kinetics of extraction with TODGA which can be attributed to the high viscosity coefficient of RTIL compared to the molecular diluents. The observed slower kinetics of extraction was quantified and found to follow first order kinetics with the rate constant of 5.5 × 10^?4 s^?1. The formation constant of Am-TODGA complex was found to be more (4.18 × 10⁸ M^?1) than Eu-TODGA complex (3.31 × 10⁸ M^?1) in RTIL. The parameters viz. diffusion coefficient, activation energy for Eu(III)/Eu(II) were determined and found to be 3.08 × 10^?8/cm² s^?1 (at 303 K) and 39.34 kJ mol^?1 respectively. The thermodynamic parameters ΔG, ΔH and ΔS for the reaction were evaluated using the linear regression of the plot of E ^0* versus T. The redox reaction was found to be exothermic with decrease in entropy value.     

Application of hollow fiber supported liquid membrane for the separation of americium from the analytical waste

Americium from analytical solid waste containing U and metallic impurities was separated using hollow fiber supported liquid membrane (HFSLM) technique impregnated with DHOA–TODGA from nitric acid medium. An aliquot of 5 g of the solid waste containing Am (19.95 mg) as minor actinide and of U (2,588 mg), Fe (1,360 mg), Ca (1,810 mg) and Na (3,130 mg) as major impurities was processed. The feed solution obtained after the dissolution of the residue in ~4 M HNO₃ was passed through HFSLM module. In the first stage using 1 M DHOA–dodecane U was recovered while Am and other impurities were left in the raffinate. In the second stage, 0.5 M DHOA + 0.1 M TODGA/dodecane was used for the separation of Am from other impurities. Though, majority of the elements were separated in this cycle, Ca was co extracted along with the americium. CMPO extraction chromatographic technique was used for further separation of americium from Ca. Significant decontamination factors were achieved in this three step separation process with respect to U, Fe, Na and Ca with ~77 % recovery of americium.     

Spectral interference study of uranium on other analytes by using CCD based ICP-AES

Due to the multi-electronic nature, uranium is having line rich emission spectra and is expected to interfere during the determination of analytes at the trace level in uranium matrix. Therefore, chemical separation of uranium followed by the determination of trace metallic impurities in the raffinate by ICP-AES is generally adopted procedure in nuclear industries. There is restriction on choosing alternate analytical lines of elements by photomultiplier tube based ICP-AES associated with the polychromator while monochromator needs significant time to scan different analytical lines of all the elements. Since charged coupled detector (CCD) consists of array of pixels, it is having more option in choosing alternative analytical lines of the analytes. Therefore, an attempt was made to study the spectral interference of uranium on different analytical lines of analytes viz. Al, Ga, In, Si, Li, Ti, Mg, Sr, K, Ce, Nd, Lu, Sc, V, Er, Y, Ba, Bi, Pb, W, La, Tl, Sn, Yb, Mo, Sb, Pr and Zr; and the correction factors were evaluated (where ever necessary) using CCD based ICP-AES technique. The sensitivity and the detection limits of the analytical channels of the elements in presence of uranium matrix were calculated. The present study also deals with the identification of suitable analytical lines of uranium and its detection limits.     

Highly Efficient Diglycolamide‐Based Task‐Specific Ionic Liquids: Synthesis,Unusual Extraction Behaviour,Irradiation, and Fluorescence Studies

Two new diglycolamide‐based task‐specific ionic liquids (DGA? TSILs) were evaluated for the extraction of actinides and lanthanides from acidic feed solutions. These DGA? TSILs were capable of exceptionally high extraction of trivalent actinide ions, such as Am³⁺, and even higher extraction of the lanthanide ion, Eu³⁺ (about 5–10 fold). Dilution of the DGA? TSILs in an ionic liquid, C₄mim⁺ ? NTf₂^?, afforded reasonably high extraction ability, faster mass transfer, and more efficient stripping of the metal ion. The nature of the extracted species was studied by slope analysis, which showed that the extracted species contained one NO₃^? anion, along with the participation of two DGA? TSIL molecules. Time‐resolved laser fluorescence spectroscopy (TRLFS) analysis showed a strong complexation with no inner‐sphere water molecule in the Eu^III? DGA? TSIL complexes in the presence and absence of C₄mim⁺ ? NTf₂^? as the diluent. The very high radiolytic stability of DGA? TSIL 6 makes it one of the most‐efficient solvent systems for the extraction of actinides under acidic feed conditions.     

Effect of hybrid fillers on the mechanical behavior of polypropylene based hybrid composites

The present study investigates the effect of hybrid fillers such as graphene nanoplatelets (GnPs) and Titanium di-oxide (TiO₂) in polypropylene (PP) composites on the mechanical properties. The compatibilizing agent of Maleic anhydride grafted polypropylene (MAPP) are used in the polypropylene based composites to increase the interfacial adhesion between matrix and fillers. The experiments are designed according to L₁₆ orthogonal array (OA) based design of experiments (DOE). The parameters selected for this study are GnPs, TiO₂ and MAPP with four different levels are used.By using Orthogonal array and Taguchi based experimental design, the performance characteristics of tensile modulus, tensile strength, elongation at break and toughness can be analyzed with more objective through a small set of experiments.Taguchi based analysis are used to find out the optimal parameters to maximize the tensile properties for the GnPs and TiO₂ reinforced PP hybrid composites. Further, analysis of variance (ANOVA) is investigated to identify the most significant parameters which influence the mechanical properties.From the analysis it was found that the optimal parameters of 3 ?wt% GnPs, 2 ?wt% TiO₂ and 6 ?wt% MAPP for maximum tensile modulus and tensile strength. The most significant parameter for tensile modulus and tensile strength is GnPs followed by TiO₂ and MAPP according to ANOVA analysis.     

Assessing the feasibility study of highly efficient and selective co-sequestration process for cesium and strontium utilizing calix-crown and crown-ether based combined solvent systems

Journal of Radioanalytical and Nuclear Chemistry - Efficient and selective extraction of 137Cs and 90Sr from high level liquid waste (HLLW) is of utmost importance in the back end nuclear fuel...     

In Situ Grignard Metalation Method for the Synthesis of Hauser Bases

The in situ Grignard Metalation Method (iGMM) is a straightforward one-pot procedure to quickly produce multigram amounts of Hauser bases R₂N-MgBr which are valuable and vastly used metalation reagents and novel electrolytes for magnesium batteries. During addition of bromoethane to a suspension of Mg metal and secondary amine at room temperature in an ethereal solvent, a smooth reaction yields R₂N-MgBr under evolution of ethane within a few hours. A Schlenk equilibrium is operative, interconverting the Hauser bases into their solvated homoleptic congeners Mg(NR₂)₂ and MgBr₂ depending on the solvent. Scope and preconditions are studied, and side reactions limiting the yield have been investigated. DOSY NMR experiments and X-ray crystal structures of characteristic examples clarify aggregation in solution and the solid state.     

Chemical promenades: Exploring potential-energy surfaces with immersive virtual reality

The virtual-reality framework AVATAR (Advanced Virtual Approach to Topological Analysis of Reactivity) for the immersive exploration of potential-energy landscapes is presented. AVATAR is based on modern consumer-grade virtual-reality technology and builds on two key concepts: (a) the reduction of the dimensionality of the potential-energy surface to two process-tailored, physically meaningful generalized coordinates, and (b) the analogy between the evolution of a chemical process and a pathway through valleys (potential wells) and mountain passes (saddle points) of the associated potential energy landscape. Examples including the discovery of competitive reaction paths in simple A + BC collisional systems and the interconversion between conformers in ring-puckering motions of flexible rings highlight the innovation potential that augmented and virtual reality convey for teaching, training, and supporting research in chemistry.     

Methods and concerns in disposal of nuclear waste from storage vials post recovery

Journal of Radioanalytical and Nuclear Chemistry - The speciation of iodine in environment must be known in order to properly assess its geological fate and to study potential remediation materials...