Study of structure and polymerization of epitaxially grown SiPc(OH)2 thin films by high-resolution electron microscopy

Thin films of SiPc(OH)₂ (Pc = phthalocyanine) were formed epitaxially on the (001) surface of mica by vacuum deposition and were then polymerized by heat treatment. The molecular packing of the SiPc(OH)₂ was determined by electron diffraction and high-resolution electron microscopy as triclinic${\rm P\bar 1} $ having dimensions a = 0.727, b = 1.307, c = 0.688 nm, α = 102.5, β = 104.2, and γ = 97.4°. This monomer crystal grows with its c-axis parallel to the a-axis of the substrate mica and its bc-plane parallel to the (001) surface of mica. By heat treatment at 320°C, the SiPc(OH)₂ polymerized with the c-axis of the polymer parallel to the c-axis of the monomer. At 420°C, the c-axis of the polymer became parallel to the a*-axis of the monomer (i.e., perpendicular to the film surface). From high-resolution electron microscopy of partially polymerized specimens, the polymerization was shown to start at the edges of small monomer crystals. This may be considered to be due to the volume expansion during the polymerization. © 1993 John Wiley & Sons, Inc.     

Measurement of binary diffusion coefficient from impulse response curve having extremely low absorbance intensity under supercritical condition by noise elimination technique

A noise elimination technique was applied to the determination of binary diffusion coefficients D₁₂ from the response curves having extremely low absorbance intensities in impulse response methods under supercritical conditions of carbon dioxide. The effectiveness of this technique was experimentally examined for the analyses of response curves through both the curve-fitting and the moment methods in two cases: the chromatographic impulse response method for phenol and β-carotene with a polymer-coated capillary column, and the Taylor dispersion method for acetone with an uncoated capillary column. Unreliable D₁₂ values were obtained from the moment method of the response curves at lower absorbance intensities, even treated with noise elimination. The curve-fitting method with the noise elimination treatment was quite effective for determining the D₁₂ values accurately, and was valid at the lowest absorbance intensities, on the order of 10⁻⁴ absorbance unit of UV-Vis multi-detector, corresponding to the smallest quantity of the solute, i.e. 6×10⁻⁵, 6×10⁻⁶, and 5×10⁻² μ mol for phenol, β-carotene, and acetone, respectively, under conditions studied. Infinite dilution regions for binary diffusion coefficients were obtained by injecting various amounts: the binary diffusion coefficients showed constant values at concentrations less than 0.6, 0.004, and 0.08 mol m⁻³ for phenol, β-carotene, and acetone, respectively, in supercritical carbon dioxide at 313.2 K and 16–18 MPa.     

Reactions of salicylaldehyde with some conjugated olefins

Some condensation reactions of salicylaldehyde with various conjugated olefins, 1a, 1b, 1c, 2a, 2b, 2c , and 3 , were studied. In the condensations with 1a, 1b , and 1c gave 2,2-dimethyl-2H-chromene derivatives via “3–2 cyclization”, while the condensations with 2a, 2b, 2c , and 3 gave 2-methyl-2H-chromen-2-yl)acetic acid derivatives via “3–4 cyclization”.     

The synthesis of benzofuroquinolines. IV. Some halobenzofuro[2,3-B]- and [3,2-C]quinoline derivatives

Some 8- or 9-halobenzofuro[2,3-b]quinolines ( 1a , 8-F, 8-C1, 9-F, 9-Cl) and 9-halobenzofuro[2,3-b]quinoline-11-carboxylic acid ( 1b , F, Cl) were synthesized from 6- or 7-halo-3-(2-methoxyphenyl)-2-oxo-1,2-dihydroquino-line-4-carboxylic acids ( 3 ). And, some 9-halo-11(6H)-benzofuro[2,3-b]quinolinone ( 8 , F, Cl, Br) and 2-halo-6(5H)-benzofuro[3,2-c]quinolinone ( 9 , F, Cl, Br) were synthesized from 6-halo-4-hydroxy-3-(2-methoxyphenyl)-2(1H)-quinolinone ( 7 ), and they were converted to the corresponding chlorohalobenzofuroquinolines ( 1c , 9-F, 9-C1, 9-Br, and 2 , F, Cl, Br).     

Brominations of steroidal hormone having alpha,beta-unsaturated ketone, 17-O-acetyltestosterone, in the presence of silver triflate

Bromination of 17-O-acetyltestosterone (17beta-acetoxyandrost-4-en-3-one) (1) was performed with 1, 5, and 10 eq of Br2 in AcOH-Et2O at room temperature. In all cases 2alpha,6beta- (2) and 2alpha,6beta-dibromo-17beta-acetoxyandrost-4-en-3-one (3) were obtained, although the yields were dependent upon the conditions used. Bromination of compound 1 with 10 eq of Br2 in the presence of silver trifluoromethanesulfonate (silver triflate, AgOTf) at room temperature for 12 h gave 2,7alpha-dibromo- (4) and 2,4,7alpha-tribromo-17beta-acetoxy-3-hydroxy-1-methylestra-1,3,5(10)-triene-6-one (5). The formations of the products were inferred on the basis of products obtained under controlled brominations of 1 in the presence of AgOTf, and of those obtained by the brominations of compounds 9-13 also in the presence of AgOTf.     

Indirect amperometric detection of underivatized amino acids in microcolumn liquid chromatography with carbon film based ring-disk electrodes

An indirect amperometric detection of underivatized amino acids has been developed using a carbon film based ring-disk electrode (CFBRDE) in microcolumn liquid chromatography (LC). Bromide present in the mobile phase could be efficiently oxidized to bromine at the upstream (disk) electrode, and was subsequently detected at the downstream (ring) electrode. Most of the underivatized amino acids that are electroinactive under conventional amperometric conditions react rapidly with the electrogenerated bromine, the concentration of amino acids can therefore be indirectly determined by continuously monitoring the reduction current of bromine. The signal monitored at the downstream electrode was largely dependent on the bromide concentration in the mobile phase. Under optimized conditions, the response linearly increased with the concentration for most of the amino acids over a concentration range of 1-100 microM, with a correlation coefficient of 0.990-0.993. The detection limits for most of the amino acids were below 1 microM (0.2 pmol). It was demonstrated that detection with a ring-disk electrode offers the advantages of achieving a much higher collection efficiency caused by a decrease in flow rate in the microcolumn LC.     

Vapor-phase graft copolymerization of vinyl chloride and vinylidene chloride onto polypropylene fibers by simultaneous irradiation technique

The vapor-phase graft copolymerization of vinyl chloride and vinylidene chloride onto polypropylene fibers was studied by a simultaneous γ-irradiation technique. The weight increase during irradiation due to the grafting in monomers at constant vapor pressure was measured by a sensitive spring balance. The sorption of both monomers onto unirradiated polypropylene fibers was also measured. The graft copolymerization reaction was suppressed with increasing irradiation temperature, and the overall activation energies of grafting were negative in both monomers, ?2.4 kcal/mole for vinyl chloride and ?6.3 kcal/mole for vinylidene chloride. The initial rate of grafting increased linearly with the vapor pressure of monomers. The above dependence was found to parallel the sorption of monomers on polypropylene fibers. The reaction rates were proportional to the 0.9 power of the dose rate in both monomers. The relationship between the grafting and the sorption of monomers was discussed on the basis of kinetics.     

Convenient synthesis of 5-trifluoroacetylated imidazoles by ring transformation of mesoionic 1,3-oxazolium-5-olates

Mesoionic 4-trifluoroacetyl-1,3-oxazolium-5-olates (1), obtained from the reaction of N-acyl-N-alkylglycines (2) with trifluoroacetic anhydride, react with amidines to give 5-trifluoroacetylimidazoles (3) in moderate yield. The novel ring transformations of 1 into 3 occur via an initial attack of amidines on the C-2 position of the ring.     

Convenient synthesis of (+)-valiolamine and (-)-1-epi-valiolamine from (-)-vibo-quercitol

Convenient and practical synthesis of (+)-valiolamine and (-)-1-epi-valiolamine from (-)-vibo-quercitol, 1-deoxy-L-myo-inositol, readily obtained by bioconversion of myo-inositol, is described.     

The synthesis of benzofuroquinolines. III. Two dihydroxybenzofuroquinolinones

Two dihydroxybenzofuroquinolinones, 3,9-dihydroxy-5H-benzofuro[3,2-c]quinolin-6-one (V) and 3,8-dihydroxy-6H-benzofuro[2,3-b]quinolin-11-one (VI), were obtained by the demethyl-cyclization of 3-(2,4-dimethoxyphenyl)-4-hydroxy-7-methoxy-1H-quinolin-2-one (IV). By the methylation with diazomethane, V gave a dimethylated compound (VII), while VI gave a trimethylated compound (VIII).