Clinical usefulness of a trypsin radioimmunoassay kit

From the clinical use of RIA-gnost trypsin kit, the following results were obtained. 1. Standard curve showed a steep and good curve was shown. 2. Incubation: The condition for the first incubation was set at the room temperature for 10-24 hours and that for the second incubation at the room temperature for 3-5 hours. With these settings, satisfactory results were obtained. 3. Reproducibility and recovery: The C.V. of the reproducibility and the recovery were considered superior, and the values were below 10% and +/- 3%, respectively. 4. Correlation between trypsin and serum elestase-1: An excellent positive correlation (coefficient of correlation r = 0.889) was shown. 5. Serum trypsin concentration of normal and pancreatic diseases: The normal range was from 100 to 500 ng/ml. Acute pancreatitis rose obviously. Diabetes mellitus and chronic pancreatitis was below 500 ng/ml and the pancreatic cancer showed a tendency to scatter in the range of 50-1,250 ng/ml. The above results indicated that serum trypsin can be easily measured with high precision by using this method. Thus the method is considered useful for the diagnosis of pancreatic diseases.     

NMR analysis of lignins in CAD-deficient plants. Part 1. Incorporation of hydroxycinnamaldehydes and hydroxybenzaldehydes into lignins

Peroxidase/H2O2-mediated radical coupling of 4-hydroxycinnamaldehydes produces 8-O-4-, 8-5-, and 8-8-coupled dehydrodimers as has been documented earlier, as well as the 5-5-coupled dehydrodimer. The 8-5-dehydrodimer is however produced kinetically in its cyclic phenylcoumaran form at neutral pH. Synthetic polymers produced from mixtures of hydroxycinnamaldehydes and normal monolignols provide the next level of complexity. Spectral data from dimers, oligomers, and synthetic polymers have allowed a more substantive assignment of aldehyde components in lignins isolated from a CAD-deficient pine mutant and an antisense-CAD-downregulated transgenic tobacco. CAD-deficient pine lignin shows enhanced levels of the typical benzaldehyde and cinnamaldehyde end-groups, along with evidence for two types of 8-O-4-coupled coniferaldehyde units. The CAD-downregulated tobacco also has higher levels of hydroxycinnamaldehyde and hydroxybenzaldehyde (mainly syringaldehyde) incorporation, but the analogous two types of 8-O-4-coupled products are the dominant features. 8-8-Coupled units are also clearly evident. There is clear evidence for coupling of hydroxycinnamaldehydes to each other and then incorporation into the lignin, as well as for the incorporation of hydroxycinnamaldehyde monomers into the growing lignin polymer. Coniferaldehyde and sinapaldehyde (as well as vanillin and syringaldehyde) co-polymerize with the traditional monolignols into lignins and do so at enhanced levels when CAD-deficiency has an impact on the normal monolignol production. The implication is that, particularly in angiosperms, the aldehydes behave like the traditional monolignols and should probably be regarded as authentic lignin monomers in normal and CAD-deficient plants.     

Mechanistic action of ferric oxide in the hydrosilylation of 1,6-divinyl(perfluorohexane) with trichlorosilane

In the hydrosilylation of 1,6-divinyl(perfluorohexane) (FDV) with trichlorosilane (TCS) in the presence of catalytic chloroplatinic acid (Pt-Cat) under an air atmosphere (0.99 MPa), a runaway reaction accompanied by a severe pressure release occurred when Fe₂O₃ was present as an impurity in the system. In this study, we investigated the mechanism of action of Fe₂O₃ on this hydrosilylation by monitoring the thermal behavior of TCS/FDV/Pt-Cat/Fe₂O₃ mixtures with various compositions, using an accelerating rate calorimeter (ARC). In the case of TSC/FDV/Pt-Cat, a typical hydrosilylation composition in the industrial process, heat release, possibly due to hydrosilylation, began at 90 °C. On the other hand, for TCS/FDV/Pt-Cat/Fe₂O, the heat release due to hydrosilylation was hardly observed, but abrupt heat and pressure releases occurred at higher temperatures (>170 °C). Like TCS/FDV/Pt-Cat/Fe₂O₃, TCS/FDV, which contain neither Pt-Cat nor Fe₂O₃, released heat and pressure at high temperatures (>210 °C), while the heat and pressure release rates were comparatively low. From these results, the runaway reaction may occur when hydrosilylation is prevented, and Fe₂O₃ behaves as a negative catalyst for hydrosilylation. In the FT-IR spectrum of TCS/FDV/Pt-Cat/Fe₂O₃ after heating, an absorption peak at approximately 1,710 cm^?1, which may be attributed to a carbonyl group, was observed. Thus, it is considered that the runaway reaction observed during the hydrosilylation results from the action of Fe₂O₃ as a negative catalyst for hydrosilylation as well as as an oxidation catalyst for the by-product generated from the reaction between TCS and FDV.     

Chromatographic impulse response technique with curve fitting to measure binary diffusion coefficients and retention factors using polymer-coated capillary columns

The theoretical basis of a Gaussian-like approximate solution was applied to a chromatographic impulse response technique with curve fitting for measuring binary diffusion coefficients and retention factors using a polymer-coated capillary column. The formulae were derived for evaluating both the accuracy of the approximate solution and the sensitivity of the parameters. The validity of the solution also was confirmed experimentally for pulse injection of phenol in acetone into supercritical carbon dioxide flowing at 313.15 K and 11.6-28.6 MPa. Potential sources for experimental errors of the method are discussed.     

Impulse response techniques to measure binary diffusion coefficients under supercritical conditions

This review describes impulse response techniques with a curve-fitting method to measure thermodynamic properties, such as binary diffusion coefficient, retention factor, and partial molar volume, under supercritical conditions. Theoretical background, parameter sensitivity, sources of experimental error, noise elimination technique, and the correction of apparent binary diffusion coefficients due to column coiling are discussed based on recent studies, together with data sources and predictive correlations for binary diffusion coefficients.     

TiO2 synthesis inspired by biomineralization: control of morphology, crystal phase, and light-use efficiency in a single process

Hydroxyapatite is mineralized along the long axis of collagen fiber during osteogenesis. Mimicking such biomineralization has great potential to control inorganic structures and is fast becoming an important next-generation inorganic synthesis method. Inorganic matter synthesized by biomineralization can have beautiful and functional structures that cannot be created artificially. In this study, we applied biomineralization to the synthesis of the only photocatalyst in practical use today, titanium dioxide (TiO(2)). The photocatalytic activity of TiO(2) mainly relates to three properties: morphology, crystal phase, and light-use efficiency. To optimize TiO(2) morphology, we used a simple sequential peptide as an organic template. TiO(2) mineralized by a β-sheet peptide nanofiber template forms fiber-like shapes that are not observed for mineralization by peptides in the shape of random coils. To optimize TiO(2) crystal phase, we mineralized TiO(2) with the template at 400 °C to transform it into the rutile phase and at 700 °C to transform it into a mixed phase of anatase and rutile. To optimize light-use efficiency, we introduced nitrogen atoms of the peptide into the TiO(2) structure as doped elemental material during sintering. Thus, this biomineralization method enables control of inorganic morphology, crystal phase, and light-use efficiency in a single process.     

Synthesis of Methyl (Methyl D-and L-Idopyranosid)Uronates from myo-Inositol

Abstract

Methyl (methyl α-D-(9a), α-(9b), β-D-(10a), and β-L-(10b) idopyranosid)uronates were synthesized from myo-inositol. Baeyer-Villiger oxidation of the optically resolved inosose derivatives (3a and 3b) proceeded regioselectively to afford 4a and 4b in high yields, respectively. Ring-opening of the 7-membered hemiacetal-lactones (4a and 4b) with acid and subsequent deprotection gave the title compounds.     

Pyrolysis of Dibenzyl Selenides to Bibenzyls

The formation of carbon-carbon bond by sulfur extrusion such as pyrolysis of cyclic sulfones is well known as an important synthetic method, especially for the synthesis of cyclophane framework.¹⁾ Little is known about selenium extrusion as the counterpart, though organoseleniums have been properly appreciated as a useful tool for manipulating a functional group.²⁾ Lardon reported that the thermal decomposition of dibenzyl diselenide led to a mixture of dibenzyl selenide and polyselenides.³⁾ In contrast, recent reports showed that at 210°C, heating bis(diphenylmethyl) diselenide resulted in ready selenium extrusion to 1,1,2,2-tetraphenylethane⁴⁾, and dianthrylmethyl mono- and diselenides to 1,2-dianthrylethane.⁵⁾ Therefore,- it is worthwhile to study the thermal behavior of dibenzyl selenide itself.     

Resonance Energy Transfer in a Genetically Engineered Polypeptide Results in Unanticipated Fluorescence Intensity

The fluorescence intensity of a C-terminal acceptor chromophore, N-(7-dimethylamino-4-methyl coumarin (DACM), increased proportionally with 280 nm irradiation of an increasing number of donor tryptophan residues located on a β-sheet forming polypeptide. The fluorescence intensity of the acceptor chromophore increased even as the length of the β-sheet edge approached 256 Å, well beyond the Förster radius for the tryptophan–acceptor chromophore pair. The folding of the peptides under investigation was verified by circular dichroism (CD) and deep UV resonance Raman experiments. Control experiments showed that the enhancement of DACM fluorescence occurred concomitantly with peptide folding. In other control experiments, the DACM fluorescence intensity of the solutions of tryptophan and DACM did not show any enhancement of DACM fluorescence with increasing tryptophan concentrations. Formation of fibrillar aggregates of the substrate peptides prepared for the fluorescence studies was undetectable by thioflavin T (ThT) fluorescence.