Interference and interactions in mesoscopic rings

We consider a mesoscopic ring connected to external reservoirs by tunnel junctions. The ring is capacitively coupled to an external gate electrode and may be pierced by a magnetic field. Due to strong electron–electron interactions within the ring the conductance shows Coulomb blockade oscillations as a function of the gate voltage, while Aharonov–Bohm interference effects lead to a dependence on the magnetic flux. The Hamiltonian of the ring is given by a Luttinger model that allows for an exact treatment of both interaction and interference effects. We conclude that the positions of conductance maxima as a function the external parameters can be used to determine the interaction parameter , and the shapes of conductance peaks are strongly affected by electron correlations within the ring.     

Raman spectroscopy of isolated carbyne chains confined in carbon nanotubes: Progress and prospects

Carbyne is an infinitely long linear chain of carbon atoms with sp¹ hybridization and the truly one-dimensional allotrope of carbon. While obtaining freestanding carbyne is still an open challenge, the study of confined carbyne, linear chains of carbon encapsulated in carbon nanotubes, provides a pathway to explore carbyne and its remarkable properties in a well-defined environment. In this review, we discuss the basics and recent advances in studying single confined carbyne chains by Raman spectroscopy, which is their primary spectroscopic characterization method. We highlight where single carbyne chain studies are needed to advance our understanding of confined carbyne as a material system and provide an overview of the open questions that need to be addressed and of those aspects currently under debate.     

19.4%‐efficient large‐area fully screen‐printed silicon solar cells

We demonstrate industrially feasible large‐area solar cells with passivated homogeneous emitter and rear achieving energy conversion efficiencies of up to 19.4% on 125 × 125 mm² p‐type 2–3 Ω cm boron‐doped Czochralski silicon wafers. Front and rear metal contacts are fabricated by screen‐printing of silver and aluminum paste and firing in a conventional belt furnace. We implement two different dielectric rear surface passivation stacks: (i) a thermally grown silicon dioxide/silicon nitride stack and (ii) an atomic‐layer‐deposited aluminum oxide/silicon nitride stack. The dielectrics at the rear result in a decreased surface recombination velocity of S_rear = 70 cm/s and 80 cm/s, and an increased internal IR reflectance of up to 91% corresponding to an improved J_sc of up to 38.9 mA/cm² and V_oc of up to 664 mV. We observe an increase in cell efficiency of 0.8% absolute for the cells compared to 18.6% efficient reference solar cells featuring a full‐area aluminum back surface field. To our knowledge, the energy conversion efficiency of 19.4% is the best value reported so far for large area screen‐printed solar cells. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Model based prediction of the trap limited diffusion of hydrogen in post‐hydrogenated amorphous silicon

The diffusion of hydrogen within an hydrogenated amorphous silicon (a‐Si:H) layer is based on a trap limited process. Therefore, the diffusion becomes a self‐limiting process with a decreasing diffusion velocity for increasing hydrogen content. In consequence, there is a strong demand for accurate experimental determination of the hydrogen distribution. Nuclear resonant reaction analysis (NRRA) offers the possibility of a non‐destructive measurement of the hydrogen distribution in condensed matter like a‐Si:H thin films. However, the availability of a particle accelerator for NRR‐analysis is limited and the related costs are high. In comparison, Fourier transform infrared spectroscopy (FTIR) is also a common method to determine the total hydrogen content of an a‐Si:H layer. FTIR spectrometers are practical table‐top units but lack spatial resolution. In this study, an approach is discussed that greatly reduces the need for complex and expensive NRR‐analysis. A model based prediction of hydrogen depth profiles based on a single NRRA measurement and further FTIR measurements enables to investigate the trap limited hydrogen diffusion within a‐Si:H. The model is validated by hydrogen diffusion experiments during the post‐hydrogenation of hydrogen‐free sputtered a‐Si. The model based prediction of hydrogen depth profiles in a‐Si:H allows more precise design of experiments, prevents misinterpretations, avoids unnecessary NRRA measurements and thus saves time and expense. (© 2016 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Raman and surface‐enhanced Raman spectroscopic studies of the 15‐mer DNA thrombin‐binding aptamer

Aptamers are single‐stranded oligonucleotides that selectively bind to their target molecules owing to their ability to form secondary structures and shapes. The 15‐mer (5′‐GGTTGGTGTGGTTGG‐3′) DNA thrombin‐binding aptamer (TBA) binds to thrombin following the formation of a quadruplex structure via the Hoogsten‐type G–G interactions. In the present study, Raman and SERS spectra of TBA and thiolated TBA (used to facilitate covalent bonding to metal nanoparticle) in different conditions are investigated. The spectra of the two analogs exhibit vibrations, such as the C8N7 H2 deformation band at ∼1480 cm⁻¹ of the guanine tetrad, that are characteristic of the quadruplex structure in the presence of K⁺ ions or at low temperature. Interestingly, SERS spectra of the two analogs differ markedly from their respective normal Raman spectra, possibly due to changes in the conformation of the aptamer upon binding, as well as to the specific interaction of individual vibrational modes with the metal surface. In addition, the SERS spectra of the thiolated aptamer show significant changes with different concentrations, which may be due to different orientation of the molecule with respect to the metal surface. This study provides useful information for the development of label‐free aptamer‐based SERS sensors and assays. Copyright © 2009 John Wiley & Sons, Ltd.     

Assessment of mitral regurgitation by magnetic resonance imaging

To evaluate the potential of magnetic resonance imaging (MRI) in detection and quantification of mitral regurgitation, 26 pts. with echocardiographically or angiographically documented mitral regurgitation were examined using a 0.5 Tesla superconducting magnet. In each patient a multislice-multiphase study in a sagittal-coronal double angulated projection (four-chamber view equivalent) was performed to assess left and right ventricular volumes, ejection fraction and regurgitant fraction. Additionally a blood flow sensitive cine-study (fast field echo: FFE) was done to visualize direction and area of regurgitant jet. MRI data were compared with quantitative and qualitative assessment of mitral regurgitation by angiography, 2D echocardiography, Doppler sonography and color flow mapping. Using the FFE mode MRI was able to detect the regurgitant jet as a typical signal loss within the left atrium in all patients. The ratio of regurgitant jet area/left atrium area as determined by MRI showed a correlation with a comparable ratio from color Doppler sonography of R = 0.87 (p < 0.001). There was also good agreement in semiquantitative grading of mitral regurgitation between MRI and angiography (R = 0.77, p < 0.001). The determination of left and right ventricular stroke volume allowed the calculation of the regurgitant fraction, which showed a correlation with invasively determined regurgitation fraction of R = 0.84 (p < 0.001). These data provide additional information that MRI may be useful as a noninvasive technique to detect and quantify mitral regurgitation.     

Kinetic roughening of laser deposited polymer films: crossover from single particle character to continuous growth

The crossover in kinetic roughening of thin films from a particle-character-dominated regime to continuous growth behavior has been observed in this work. This has been accomplished by atomic force microscopy investigations of pulsed laser deposited amorphous organic films with thicknesses ranging from several nanometers to more than 4 microm. The early-stage random-deposition-like processes end once a closed layer is formed, which grows without saturation on the characteristic length scales. In addition, the influence of oblique film deposition has been examined and interpreted.     

Regulation of stearoyl-CoA desaturase-1 after central and peripheral nerve lesions

Background  

Interruption of mature axons activates a cascade of events in neuronal cell bodies which leads to various outcomes from functional regeneration in the PNS to the failure of any significant regeneration in the CNS. One factor which seems to play an important role in the molecular programs after axotomy is the stearoyl Coenzyme A-desaturase-1 (SCD-1). This enzyme is needed for the conversion of stearate into oleate. Beside its role in membrane synthesis, oleate could act as a neurotrophic factor, involved in signal transduction pathways via activation of protein kinases C.     

Crystallization and grain growth characteristics of yttria-stabilized zirconia thin films grown by pulsed laser deposition

Knowledge about the crystallization and grain growth characteristics of metal oxide thin films is essential for effective microstructural engineering by thermal post-annealing and the integration to Si-based miniaturized electroceramic devices. Finite size and interface effects may cause fundamentally different behavior compared to three dimensional macroscopic systems. This work presents a comprehensive investigation of the crystallization kinetics and microstructural evolution upon thermal post-annealing of amorphous 200 nm and 1.2 μm thin films of 8 mol% yttria-stabilized zirconia grown by pulsed laser deposition (PLD) using ex- and in-situ X-ray diffraction, Raman spectroscopy, and electron microscopy techniques. The layers exhibit a remarkably low crystallization temperature of 200-250 °C while exposure to energetic electrons induces the formation of randomly dispersed ~ 20 nm sized crystallites already at ambient temperature. The isothermal amorphous to crystalline phase transformation kinetics can be described quantitatively by the Johnson-Mehl-Avrami-Kolmogorov model. They reveal characteristics of a three dimensional growth under cation bulk diffusion control with heterogeneous nucleation that changes from continuous to instantaneous initial seeding at temperatures above 300 °C. Large (> 100 nm) equiaxed grains are formed rapidly without a stabilization of transient nanocrystals during the thermally induced phase transformation. A stagnation of normal grain growth resulting in a logarithmic normal size distribution is observed once the average grain dimensions approach the film thickness. The results on the crystallization and grain growth of the PLD-grown YSZ films are evaluated with regards to the fabrication of YSZ solid electrolyte membranes for Si-supported micro solid oxide fuel cells and gas sensors.     

Niche-dependent development of functional neuronal networks from embryonic stem cell-derived neural populations

Background  

The present work was performed to investigate the ability of two different embryonic stem (ES) cell-derived neural precursor populations to generate functional neuronal networks in vitro. The first ES cell-derived neural precursor population was cultivated as free-floating neural aggregates which are known to form a developmental niche comprising different types of neural cells, including neural precursor cells (NPCs), progenitor cells and even further matured cells. This niche provides by itself a variety of different growth factors and extracellular matrix proteins that influence the proliferation and differentiation of neural precursor and progenitor cells. The second population was cultivated adherently in monolayer cultures to control most stringently the extracellular environment. This population comprises highly homogeneous NPCs which are supposed to represent an attractive way to provide well-defined neuronal progeny. However, the ability of these different ES cell-derived immature neural cell populations to generate functional neuronal networks has not been assessed so far.