Two-dimensional on-line detection of brominated and iodinated volatile organic compounds by ECD and ICP-MS after GC separation

Inductively coupled plasma-mass spectrometry (ICP-MS) was coupled to a gas chromatographic (GC) system with electron capture detector (ECD), which enables relatively easy characterization and quantification of brominated and iodinated (halogenated) volatile organic compounds (HVOCs) in aquatic and air samples. The GC-ECD system is connected in series with an ICP-MS by a directly heated transfer line and an outlet port-hole for elimination of the ECD make-up gas during ignition of the plasma. The hyphenated GC-ECD/ICP-MS system provides high selectivity and sensitivity for monitoring individual HVOCs under fast chromatographic conditions. The ECD is most sensitive for the detection of chlorinated and brominated but the ICP-MS for iodinated compounds. The greatest advantage of the use of an ICP-MS is its element-specific detection, which allows clear identification of compounds in most cases. The absolute detection limits for ICP-MS are 0.5 pg for iodinated, 10 pg for brominated, and 50 pg for chlorinated HVOCs with the additional advantage that calibration is almost independent on different compounds of the same halogen. In contrast to that detection limits for ECD vary for the different halogenated compounds and lie in the range of 0.03-11 pg. The two-dimensional GC-ECD/ICP-MS instrumentation is compared with electron impact mass spectrometry (EI-MS) and microwave induced plasma atomic emission detection (MIP-AED). Even if EI-MS has additional power in identifying unknown peaks by its scan mode, the detection limits are much higher compared with GC-ECD/ICP-MS, whereas the selective ion monitoring mode (SIM) reaches similar detection limits. The MIP-AED detection limits are at the same level as EI-MS in the scan mode.     

Massenspektrometrische Untersuchung Organischer Stickstoffverbindungen. XIV—Mechanismus der Piperidin-Eliminierung aus N.N′-(o-Xylylen)-Dipieridin

The electron-impact-induced elimination of piperidine from the title compound could be established by investigation of the unsymmetrically ²H-labelled compound. The mechanism of a 1,1-elimination can be excluded be unequivocally.     

Synthese der Stannatetraphospholane (tBuP)4SnR2 (R = tBu,nBu, C6H5) und (tBuP)4Sn(Cl)nBu Molekül- und Kristallstruktur von (tBuP)4Sn(tBu)2

Synthesis of the Stannatetraphospholanes (tBuP)₄SnR₂ (R = tBu, nBu, C₆H₅) and (tBuP)₄Sn(Cl)nBu Molecular and Crystal Structure of (tBuP)₄Sn(tBu)₂ The reaction of the diphosphide K₂[tBuP-(tBuP)₂-PtBu] 4 with the halogenostannanes (tBu)₂SnCl₂, (nBu)₂SnCl₂, (C₆H₅)₂SnCl₂ or nBuSnCl₃ in a molar ratio of 1 : 1 leads via a [4 + 1]-cyclocondensation reaction to the stannatetraphospholanes (tBuP)₄SnR₂ 3 b–3 d and (tBuP)₄Sn(Cl)nBu 3 e , respectively, with the binary 5-membered P₄Sn ring system. 3 b was characterized by a single crystal structure analysis; the 5-membered ring exists in a planar conformation. The compounds 3 b–3 e were identified by NMR and also by mass spectroscopy; the ³¹P{¹H}-NMR spectra of 3 b–3 d showed an AA′MM′ (AA′MM′X), 3 e on the other hand an ABCD (ABCDX) spin system.     

Die gravimetrische Phosphorbestimmung in wolframhaltigen St?hlen

Zusammenfassung Einige der üblichen Methoden zur Phosphorbestimmung in wolframlegierten Stählen werden unter Anwendung von ¹⁸⁵W und ³²P einer Nachprüfung unterzogen. Dabei erweisen sich die Phosphorverluste durch Adsorption an dem Wolframsäureniederschlag als gering, so daß sie bei weniger anspruchsvollen Bestimmungen unberücksichtigt bleiben können. Erheblich größer sind dagegen die Fehler, die durch Mitfällung von Wolframsäure mit dem Ammoniummolybdatophosphatniederschlag entstehen können. Es werden zwei Methoden angegeben, nach denen eine quantitative Abtrennung des Wolframs und damit eine sichere Bestimmung des Phosphors möglich ist.Herr Prof. Dr.-Ing. K. Schwabe ermöglichte es uns freundlicherweise, die Untersuchungen mit radioaktivem Wolfram und Phosphor im Zentralinstitut für Kernphysik Rossendorf, Bereich Radiochemie, durchzuführen. Ihm sei auch an dieser Stelle herzlichst gedankt.     

A mass spectrometry study of XCO+, X=Si, Ge: is SiCO+ a main group carbonyl? Comments on the bonding in ground state SiCO and the

The cation [Si,C,O]+ has been generated by 1) the electron ionisation (EI) of tetramethoxysilane and 2) chemical ionisation (CI) of a mixture of silane and carbon monoxide. Collisional activation (CA) experiments performed for mass-selected [Si,C,O]+, generated by using both methods, indicate that the structure is not inserted OSiC+; however, a definitive structural assignment as Si(+)-CO, Si(+)-OC or some cyclic variant is impossible based on these results alone. Neutralisation-reionisation (+NR+) experiments for EI-generated [Si,C,O]+ reveal a small peak corresponding to SiC+, but no detectable SiO+ signal, and thus establishes the existence of the Si(+)-CO isomer. CCSD(T)@B3LYP calculations employing a triple-zeta basis set have been used to explore the doublet and quartet potential-energy surfaces of the cation, as well as some important neutral states. The results suggest that both Si(+)-CO and Si(+)-OC isomers are feasible; however, the global minimum is 2 pi SiCO+. Isomeric 2 pi SiOC+ is 12.1 kcal mol-1 less stable than 2 pi SiCO+, and all quartet isomers are much higher in energy. The corresponding neutrals Si-CO and Si-OC are also feasible, but the lowest energy Si-OC isomer (3A") is bound by only 1.5 kcal mol-1. We attribute most, if not all, of the recovery signal in the +NR+ experiment to SiCO+ survivor ions. The nature of the bonding in the lowest energy isomers of Si(+)-(CO,OC) is interpreted with the aid of natural bond order analyses, and the ground state bonding of SiCO+ is discussed in relation to classical analogues such as metal carbonyls and ketenes.