Application of the Redox-Transmetalation Procedure to Access Divalent Lanthanide and Alkaline-Earth NHC Complexes**

Divalent lanthanide and alkaline-earth complexes supported by N-heterocyclic carbene (NHC) ligands have been accessed by redox-transmetalation between air-stable NHC-AgI complexes and the corresponding metals. By using the small ligand 1,3-dimethylimidazol-2-ylidene (IMe), two series of isostructural complexes were obtained: the tetra-NHC complexes [LnI₂(IMe)₄] (Ln=Eu and Sm) and the bis-NHC complexes [MI₂(IMe)₂(THF)₂] (M=Yb, Ca and Sr). In the former, distortions in the NHC coordination were found to originate from intermolecular repulsions in the solid state. Application of the redox-transmetalation strategy with the bulkier 1,3-dimesitylimidazol-2-ylidene (IMes) ligand yielded [SrI₂(IMes)(THF)₃], while using a similar procedure with Ca metal led to [CaI₂(THF)₄] and uncoordinated IMes. DFT calculations were performed to rationalise the selective formation of the bis-NHC adduct in [SrI₂(IMe)₂(THF)₂] and the tetra-NHC adduct in [SmI₂(IMe)₄]. Since the results in the gas phase point towards preferential formation of the tetra-NHC complexes for both metal centres, the differences between both arrangements are a result of solid-state effects such as slightly different packing forces.     

Controlled migration of antifog additives from LLDPE compatibilized with LLDPE grafted maleic anhydride

This paper summarizes a study of controlled migration of an antifog (AF) additive; sorbitan monooleate (SMO), from linear low density polyethylene (LLDPE) films containing a compatibilizer, LLDPE grafted maleic anhydride (LLDPE‐g‐MA). LLDPE/LLDPE‐g‐MA/SMO blends were prepared by melt compounding. Bulk and surface properties of compression molded LLDPE films containing SMO and LLDPE‐g‐MA were characterized using Fourier transform infrared spectroscopy and contact angle measurements. Thermal properties were investigated using a thermal gravimetric analyzer. Diffusion coefficient (D) was calculated, and AF properties were characterized using a “hot fog” test. Compression molded films were characterized for their morphology using high‐resolution scanning electron microscopy, and rheological properties were measured using a parallel‐plate rotational rheometer. It was found that the LLDPE/LLDPE‐g‐MA/SMO systems are characterized by a slower SMO migration rate, a lower diffusion coefficient, and lower contact angle values compared with LLDPE/SMO blends. These results are well correlated with results of a hot fog test. Morphological studies revealed a very fine dispersion of SMO in the LLDPE films, when 3 phr LLDPE‐g‐MA was combined with 1 phr SMO. Thermal analysis results show that the incorporation of 3 phr LLDPE‐g‐MA and 1 phr SMO significantly increases the decomposition temperature of the blend at T > 400°C. At high shear rates, the LLDPE blends show that the AF and the compatibilizer have a lubrication effect on LLDPE. Copyright © 2014 John Wiley & Sons, Ltd.     

HOMO Stabilisation in π‐Extended Dibenzotetrathiafulvalene Derivatives for Their Application in Organic Field‐Effect Transistors

Three new organic semiconductors, in which either two methoxy units are directly linked to a dibenzotetrathiafulvalene (DB‐TTF) central core and a 2,1,3‐chalcogendiazole is fused on the one side, or four methoxy groups are linked to the DB‐TTF, have been synthesised as active materials for organic field‐effect transistors (OFETs). Their electrochemical behaviour, electronic absorption and fluorescence emission as well as photoinduced intramolecular charge transfer were studied. The electron‐withdrawing 2,1,3‐chalcogendiazole unit significantly affects the electronic properties of these semiconductors, lowering both the HOMO and LUMO energy levels and hence increasing the stability of the semiconducting material. The solution‐processed single‐crystal transistors exhibit high performance with a hole mobility up to 0.04 cm² V^?1 s^?1 as well as good ambient stability.     

Redox‐Induced Spin‐State Switching and Mixed Valency in Quinonoid‐Bridged Dicobalt Complexes

The complexes [{(tmpa)Co^II}₂(μ‐L¹)^2?]²⁺ ( 1²⁺ ) and [{(tmpa)Co^II}₂(μ‐L²)^2?]²⁺ ( 2²⁺ ), with tmpa=tris(2‐pyridylmethyl)amine, H₂L¹=2,5‐di‐[2‐(methoxy)‐anilino]‐1,4‐benzoquinone, and H₂L²=2,5‐di‐[2‐(trifluoromethyl)‐anilino]‐1,4‐benzoquinone, were synthesized and characterized. Structural analysis of 2²⁺ revealed a distorted octahedral coordination around the cobalt centers, and cobalt–ligand bond lengths that match with high‐spin Co^II centers. Superconducting quantum interference device (SQUID) magnetometric studies on 1²⁺ and 2²⁺ are consistent with the presence of two weakly exchange‐coupled high‐spin cobalt(II) ions, for which the nature of the coupling appears to depend on the substituents on the bridging ligand, being antiferromagnetic for 1²⁺ and ferromagnetic for 2²⁺ . Both complexes exhibit several one‐electron redox steps, and these were investigated with cyclic voltammetry and UV/Vis/near‐IR spectroelectrochemistry. For 1²⁺ , it was possible to chemically isolate the pure forms of both the one‐electron oxidized mixed‐valent 1³⁺ and the two‐electron oxidized isovalent 1⁴⁺ forms, and characterize them structurally as well as magnetically. This series thus provided an opportunity to investigate the effect of reversible electron transfers on the total spin‐state of the molecule. In contrast to 2²⁺ , for 1⁴⁺ the metal–ligand distances and the distances within the quinonoid ligand point to the existence of two low‐spin Co^III centers, thus showing the innocence of the quintessential non‐innocent ligands L. Magnetic data corroborate these observations by showing the decrease of the magnetic moment by roughly half (neglecting spin exchange effects) on oxidizing the molecules with one electron, and the disappearance of a paramagnetic response upon two‐electron oxidation, which confirms the change in spin state associated with the electron‐transfer steps.     

Bacterial cellulose/triethanolamine based ion-conducting membranes

New bacterial cellulose (BC)–triethanolamine (TEA) ion-conducting membranes have been prepared and characterized. The samples were obtained by soaking BC membranes in triethanolamine aqueous solutions and drying. The scanning electron microscopy pictures revealed that the incorporation of TEA in BC membranes covers the cellulose microfibrils. Raman spectra exhibited BC and TEA characteristic group frequencies and thermal analysis evidenced an influence of TEA content on the sample thermal stability. The ion-conductivity as a function of the temperature showed an Arrhenius behavior increasing from 1.8 × 10^?5 S/cm at room temperature to 7.0 × 10^?4 S/cm at 80 °C for the BC–TEA 1 M sample.     

Thermal Ethane Activation by Bare [V2O5]+ and [Nb2O5]+ Cluster Cations: on the Origin of Their Different Reactivities

The gas‐phase reactivity of [V₂O₅]⁺ and [Nb₂O₅]⁺ towards ethane has been investigated by means of mass spectrometry and density functional theory (DFT) calculations. The two metal oxides give rise to the formation of quite different reaction products; for example, the direct room‐temperature conversions C₂H₆→C₂H₅OH or C₂H₆→CH₃CHO are brought about solely by [V₂O₅]⁺. In distinct contrast, for the couple [Nb₂O₅]⁺/C₂H₆, one observes only single and double hydrogen‐atom abstraction from the hydrocarbon. DFT calculations reveal that different modes of attack in the initial phase of C?H bond activation together with quite different bond‐dissociation energies of the M?O bonds cause the rather varying reactivities of [V₂O₅]⁺ and [Nb₂O₅]⁺ towards ethane. The gas‐phase generation of acetaldehyde from ethane by bare [V₂O₅]⁺ may provide mechanistic insight in the related vanadium‐catalyzed large‐scale process.     

Revisiting the Intriguing Electronic Features of the BeOBeC Carbyne and Some Isomers: A Quantum-Chemical Assessment

Extensive high-level quantum-chemical calculations reveal that the rod-shaped molecule BeOBeC, which was recently generated in matrix experiments, exists in two nearly isoenergetic states, the ⁵Σ quintet (⁵ 6 ) and the ³Σ triplet (³ 6 ). Their IR features are hardly distinguishable at finite temperature. The major difference concerns the mode of spin coupling between the terminal beryllium and carbon atoms. Further, the ground-state potential-energy surface of the [2Be,C,O] system at 4 K is presented and differences between the photochemical and thermal behaviors are highlighted. Finally, a previously not considered, so far unknown C_2v-symmetric rhombus-like four-membered ring ³[Be(O)(C)Be] (³ 5 ) is predicted to represent the global minimum on the potential-energy surface.     

Pentafluoroethylaluminates: A Combined Synthetic,Spectroscopic, and Structural Study

Salts of the tetrakis(pentafluoroethyl)aluminate anion [Al(C₂F₅)₄]⁻ were obtained from AlCl₃ and LiC₂F₅. They were isolated with different counter-cations and characterized by NMR and vibrational spectroscopy and mass spectrometry. Degradation of the [Al(C₂F₅)₄]⁻ ion was found to proceed via 1,2-fluorine shifts and stepwise loss of CF(CF₃) under formation of [(C₂F₅)_4−nAlF_n]⁻ (n=1–4) as assessed by NMR spectroscopy and mass spectrometry and supported by results of DFT calculations. In addition, the [(C₂F₅)AlF₃]⁻ ion was structurally characterized.     

Asymmetric Hydrogenation of Unfunctionalized Tetrasubstituted Acyclic Olefins

Asymmetric hydrogenation has evolved as one of the most powerful tools to construct stereocenters. However, the asymmetric hydrogenation of unfunctionalized tetrasubstituted acyclic olefins remains the pinnacle of asymmetric synthesis and an unsolved challenge. We report herein the discovery of an iridium catalyst for the first, generally applicable, highly enantio‐ and diastereoselective hydrogenation of such olefins and the mechanistic insights of the reaction. The power of this chemistry is demonstrated by the successful hydrogenation of a wide variety of electronically and sterically diverse olefins in excellent yield and high enantio‐ and diastereoselectivity.     

Counter‐Intuitive Gas‐Phase Reactivities of [V2]+ and [V2O]+ towards CO2 Reduction: Insight from Electronic Structure Calculations

[V₂O]⁺ remains “invisible” in the thermal gas‐phase reaction of bare [V₂]⁺ with CO₂ giving rise to [V₂O₂]⁺; this is because the [V₂O]⁺ intermediate is being consumed more than 230 times faster than it is generated. However, the fleeting existence of [V₂O]⁺ and its involvement in the [V₂]⁺ → [V₂O₂]⁺ chemistry are demonstrated by a cross‐over labeling experiment with a 1:1 mixture of C¹⁶O₂/C¹⁸O₂, generating the product ions [V₂¹⁶O₂]⁺, [V₂¹⁶O¹⁸O]⁺, and [V₂¹⁸O₂]⁺ in a 1:2:1 ratio. Density functional theory (DFT) calculations help to understand the remarkable and unexpected reactivity differences of [V₂]⁺ versus [V₂O]⁺ towards CO₂.