A field deployable method for a rapid screening analysis of inorganic arsenic in seaweed

Inorganic arsenic (iAs) in 13 store-bought edible seaweed samples and 34 dried kelp (Laminaria digitata) samples was determined by a newly developed, field-deployable method (FDM) with the aid of a field test kit for arsenic in water. Results from the FDM were compared to results from speciation analysis achieved by using high performance liquid chromatography coupled to inductively coupled plasma mass spectrometry (HPLC-ICP-MS). The FDM consisted of a simple extraction method using diluted HNO₃ to quantitatively extract iAs without decomposing the organoarsenicals to iAs followed by the selective volatilisation of iAs as arsine (AsH₃) and subsequent chemo-trapping on a filter paper soaked in mercury bromide (HgBr₂) solution. Method optimization with a sub-set of samples showed 80–94% iAs recovery with the FDM with no matrix effect from organo-arsenic species in the form of dimethylarsinic acid (DMA) on the iAs concentration. The method displayed good reproducibility with an average error of ±19% and validation by HPLC-ICP-MS showed that the results from the FDM were comparable (slope = 1.03, R² = 0.70) to those from speciation analysis with no bias. The FDM can be conducted within an hour and the observed limit of quantification was around 0.05 mg kg^?1 (dry weight). This method is well suited for on-site monitoring of iAs in seaweed before it is harvested and can thus be recommended for use as a screening method for iAs in seaweed.

Open image in new window

Graphical abstract Screening seaweed for their inorganic arsenic concentration within one hour without bias has been made possible in the field by using a field deployable arsenic kit. Its accuracy and precision was compared to HPLC-ICPMS.

     

Synthesis of intrinsically flame‐retardant copolyamides and their employment in PA6‐fibers

Flame‐retarded polyamide 6.6 (FR‐PA6.6) was prepared by the cocondensation of hexamethylene diammonium adipate (AH‐salt) with the corresponding salts of hexamethylene diamine and two different organophosphorus compounds, namely, 3‐hydroxyphenylphosphinylpropanoic acid (3‐HPP, 1) and 9,10‐dihydro‐10‐[2,3‐di (hydroxycarbonylpropyl]‐10‐phosphaphenanthrene‐10‐oxide (DDP, 2). The incorporation of the phosphorus comonomers and the thermal and physical properties of the resulting copolyamides have been studied. The phosphorus‐modified FR‐PA6.6 possesses high relative viscosities of 2.0 to 2.4, good thermal stability, and was used for the production of polyamide blends by merging FR‐PA6.6 with commercial PA6. This offered access to flame‐retarded PA6 multifilaments, which possess tensile strengths up to 0.7 GPa and elastic moduli up to 6.2 GPa. Knitted fabrics of FR‐PA6 exhibit high limiting oxygen index (LOI) values between 36 and 38 and executed burning tests demonstrate that the incorporation of phosphorus‐based comonomers improve flame retardancy significantly. The approach presented here offers a straightforward access to effective flame retardancy in nylon 6.     

Neutron diffraction study of [H(4)Co(4)(C(5)Me(4)Et)(4)], a tetrahedral metal cluster complex with four face-bridging hydride ligands

A single-crystal neutron diffraction analysis of the cluster complex [H(4)Co(4)(C(5)Me(4)Et)(4)] was carried out on the new quasi-Laue diffractometer VIVALDI at the Institut Laue-Langevin. The structure consists of four face-bridging hydrides attached to a tetrahedral cobalt metal core. Average distances and angles in the core of the molecule are as follows: Co-Co = 2.571(8), Co-C = 2.158(6), Co-H = 1.749(7), H.H = 2.366(9) A; Co-H-Co = 94.6(3), H-Co-H = 85.1(3) degrees. The hydride ligands are located off the Co-Co-Co planes by an average distance of 0.923(8) A. It is suggested that the dimensions of the HCo(3) fragments found in this molecule provide reasonable estimates for analogous distances and angles associated with chemisorbed H atoms situated on the 3-fold hollows of a cobalt surface. Crystallographic details: space group P2(1)/a (monoclinic); a = 21.979(2), b = 10.924(1), c = 34.406(2) A; beta = 90.81(1) degrees; Z = 8. Final agreement factor: R(F) = 0.099 for 3779 reflections [I > 2sigma(I)] collected at 20 K.     

Mechanisms of reduced human vascular cell migration after photodynamic therapy

Restenosis results from intimal hyperplasia and constrictive remodeling following cardiovascular interventions. Photodynamic therapy (PDT) has been shown to inhibit intimal hyperplasia in vivo by preventing neointimal repopulation of the treated vessel. This study was undertaken in an attempt to further dissect the mechanisms by which PDT acts on secreted and extracellular matrix proteins to inhibit migration of cultured human vascular cells. PDT of three-dimensional collagen gels inhibited invasive human smooth muscle cell (SMC) migration, whereas cell-derived matrix metalloproteinase production remained unaltered. Additionally, PDT generated cross-links in the collagen gels, a result substantiated in an ex vivo model whereby PDT rendered the treated vessels resistant to pepsin digestion and inhibited invasive migration of SMC and fibroblasts. These data support the premise that by inducing matrix protein cross-links, rendering the vessel resistant to degradation, in vivo PDT inhibits repopulation of the vessel and therefore intimal hyperplasia.     

Stress‐Induced Melting of Crystals in Natural Rubber: a New Way to Tailor the Transition Temperature of Shape Memory Polymers

Lightly cross‐linked natural rubber (NR, cis‐1,4‐polyisoprene) was found to be an exceptional cold programmable shape memory polymer (SMP) with strain storage of up to 1000%. These networks are stabilized by strain‐induced crystals. Here, we explore the influence of mechanical stress applied perpendicular to the elongation direction of the network on the stability of these crystals. We found that the material recovers its original shape at a critical transverse stress. It could be shown that this is due to a disruption of the strain‐stabilizing crystals, which represents a completely new trigger for SMPs. The variation of transverse stress allows tuning of the trigger temperature T_trig(σ) in a range of 45 to 0 °C, which is the first example of manipulating the transition of a crystal‐stabilized SMP after programming.     

Thermal and acid labile polyurethanes as a new class of responsive materials in polymeric nanoparticles and nanocapsules

A new class of polyurethanes has been designed, containing tertiary carbamate groups in the main chain of the polymer, which enable the resulting polymer to degrade completely under acid and thermal treatment. The decomposition temperatures of the polymers were determined by measuring the evolution of carbon dioxide and other decomposition products using TGA‐MS. Until decomposition of the polymer, no glass transition was found. The polymers exhibit excellent solubility in common organic solvents like chloroform and tetrahydrofuran, making them to suitable materials for film formation. From the obtained polymers, nanoparticles were synthesized by the solvent evaporation method combined with the miniemulsion technique. The resulting nanoparticles can be used as intelligent fillers in films and sensors, since they degrade at temperatures of above 180 °C, which can be detected by a color change reaction with ninhydrin. Polymeric nanocapsules were prepared by an interfacial polyaddition reaction from 2,4‐toluene diisocyanate and tertiary diols performed at the droplet's interface in inverse (water‐in‐oil) miniemulsions. These nanocapsules with an encapsulated photoacid generator can act as a release system, whereby an acidic release through irradiation with ultraviolet light can be triggered. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012