Swelling and contraction of ferrocyanide-containing polyelectrolyte multilayers upon application of an electric potential

We developed a new platform at the interface of polyelectrolyte multilayers (PEMs) and electroactive polymers (EAPs) by combining the easy buildup of PEM thin films and the deformation characteristics of the EAPs. The PEM films were made of poly(L-glutamic acid) (PGA) and poly(allylamine hydrochloride) (PAH). After [Fe(CN)6]4- ions (FCIV) were added, cyclic voltammetry (CV) was performed, resulting in a reversible expansion and contraction of the film. The shape change as well as the film buildup prior to the cycling were monitored in situ using the electrochemical quartz crystal microbalance with dissipation monitoring (EC-QCM-D). Electrochemical atomic force microscopy (EC-AFM) images confirmed the rapid shape deformation. The process takes place in an aqueous environment under mild conditions (maximum potential of 600 mV and no pH change), which makes it a promising tool for biomedical applications. In addition, the electrochemically active films are produced using the layer-by-layer (LbL) method that is already established in biotechnology and biomaterials science; therefore, the presented approach can be readily adapted in these areas, bringing about a new possibility for the nanoscale dynamic control of coating thickness in various applications.     

Embedded silver ions-containing liposomes in polyelectrolyte multilayers: cargos films for antibacterial agents

A new antibacterial coating made of poly(L-lysine)/hyaluronic acid (PLL/HA) multilayer films and liposome aggregates loaded with silver ions was designed. Liposomes filled with an AgNO 3 solution were first aggregated by the addition of PLL in solution. The obtained micrometer-sized aggregates were then deposited on a PLL/HA multilayer film, playing the role of a spacer with the support. Finally, HA/PLL/HA capping layers were deposited on top of the architecture to form a composite AgNO 3 coating. Release of encapsulated AgNO 3 from this composite coating was followed and triggered upon temperature increase over the transition temperature of vesicles, found to be equal to 34 degrees C. After determination of the minimal inhibitory concentration (MIC) of AgNO 3 in solution, the antibacterial activity of the AgNO 3 coating was investigated against Escherichia coli. A 4-log reduction in the number of viable E. coli cells was observed after contact for 120 min with a 120 ng/cm (2) AgNO 3 coating. In comparison, no bactericidal activity was found for PLL/HA films previously dipped in an AgNO 3 solution and for PLL/HA films with liposome aggregates containing no AgNO 3 solution. The strong bactericidal effect could be linked to the diffusion of silver ions out of the AgNO 3 coating, leading to an important bactericidal concentration close to the membrane of the bacteria. A simple method to prepare antibacterial coatings loaded with a high and controlled amount of AgNO 3 is therefore proposed. This procedure is far superior to that soaking AgNO 3 or Ag nanoparticles into a coating. In principle, other small bactericidal chemicals like antibiotics could be encapsulated by this method. This study opens a new route to modify surfaces with small solutes that are not permeating phospholipid membranes below the phase transition temperature.     

Changes in silicon elastomeric surface properties under stretching induced by three surface treatments

Poly(dimethylsiloxane) (PDMS) substrates are used in many applications where the substrates need to be elongated and various treatments are used to regulate their surface properties. In this article, we compare the effect of three of such treatments, namely, UV irradiation, water plasma, and plasma polymerization, both from a molecular and from a macroscopic point of view. We focus our attention in particular on the behavior of the treated surfaces under mechanical stretching. UV irradiation induces the substitution of methyl groups by hydroxyl and acid groups, water plasma leads to a silicate-like layer, and plasma polymerization causes the formation of an organic thin film with a major content of anhydride and acid groups. Stretching induces cracks on the surface both for silicate-like layers and for plasma polymer thin coatings. This is not the case for the UV irradiated PDMS substrates. We then analyzed the chemical composition of these cracks. In the case of water plasma, the cracks reveal native PDMS. In the case of plasma polymerization, the cracks reveal modified PDMS. The contact angles of plasma polymer and UV treated surfaces vary only very slightly under stretching, whereas large variations are observed for water plasma treatments. The small variation in the contact angle values observed on the plasma polymer thin film under stretching even when cracks appear on the surface are explained by the specific chemistry of the PDMS in the cracks. We find that it is very different from native PDMS and that its structure is somewhere between Si(O2) and Si(O3). This is, to our knowledge, the first study where different surface treatments of PDMS are compared for films under stretching.     

De Rham decomposition of netted manifolds

By definition a net on a manifold is a family of complementary foliations. Nets and net morphisms between netted manifolds allow to develop basic tools for the decomposability of netted manifolds and of differentiable maps between them. In this way new generalizations of de Rham’s decomposition theorem are obtained.     

Layer-by-layer self-assembled polyelectrolyte multilayers with embedded liposomes: immobilized submicronic reactors for mineralization

The development of chemical reactions in nanospaces is of paramount importance for the development of active nanodevices, particularly in nanofluidics. It has been shown in a previous paper that phospholipid vesicles can be incorporated without spontaneous bilayer rupture into poly-L-glutamic acid/poly(allylamine) (PGA/PAH) multilayered polyelectrolyte films. The aim of the present study was to use such a system as an "embedded submicronic reactor" able to trigger precipitation of calcium phosphates within closed spaces through an enzymatic reaction, the enzyme also being encapsulated in the vesicle interior. To this aim, large unilamellar vesicles (LUVs) were produced containing calcium ions as active ions in the mineralization process, spermine as an activator of crystal growth, and alkaline phosphatase as a catalyst to convert phosphate esters into phosphates. After stabilization by adding a layer of poly-(D-lysine), these vesicles were embedded in a (PGA-PAH)n film. A paranitrophenyl phosphate containing solution was then put in contact with this film. It is shown by means of infrared spectroscopy in the attenuated total reflection mode that, consecutively to this contact, calcium phosphates are growing inside the embedded vesicles. By using scanning near-field fluorescence microscopy, it is demonstrated that the alkaline phosphatase enzymes are most probably located inside the vesicles after their embedding. In addition, atomic force microscopy was used to show, after chemical removal of the organic top layer of the film, that the inorganic platelets produced after the precipitation reaction are localized in volumes of similar size and shape as that of the vesicles into which the phosphate ester hydrolysis and subsequent precipitation reaction did occur.     

A model for foam formation, stability, and breakdown in glass-melting furnaces

A dynamic model for describing the build-up and breakdown of a glass-melt foam is presented. The foam height is determined by the gas flux to the glass-melt surface and the drainage rate of the liquid lamellae between the gas bubbles. The drainage rate is determined by the average gas bubble radius and the physical properties of the glass melt: density, viscosity, surface tension, and interfacial mobility. Neither the assumption of a fully mobile nor the assumption of a fully immobile glass-melt interface describe the observed foam formation on glass melts adequately. The glass-melt interface appears partially mobile due to the presence of surface active species, e.g., sodium sulfate and silanol groups. The partial mobility can be represented by a single, glass-melt composition specific parameter psi. The value of psi can be estimated from gas bubble lifetime experiments under furnace conditions. With this parameter, laboratory experiments of foam build-up and breakdown in a glass melt are adequately described, qualitatively and quantitatively by a set of ordinary differential equations. An approximate explicit relationship for the prediction of the steady-state foam height is derived from the fundamental model.     

Utilizing Experiment and Theory to Evaluate Rhodamine B ethylenediamine as a Fluorescent Sensor for G-type Nerve Agents

Nerve gas mimic binding with Rhodamine B ethylenediamine (1) was studied in organic media. Binding of the nerve gas mimic, diethyl chlorophosphate (DCP), with the probe generated a non-fluorescent intermediate and a fluorescent product. Fluorescent and non-fluorescent products generated were identified using mass spectrometry and X-ray crystallography. Time-dependent density functional theory calculations were also used to investigate the electronic structure of the fluorescent probe in the ground and lowest lying π?→?π* singlet excited state. Though good agreement between theory and experiment can be obtained for the intense peak in the experimental spectrum using non-hybrid functionals, care must be taken when modelling these complexes due to the appearance of an n?→?π* transition that is too low in energy and appears to fall in the shoulders of the π?→?π* transitions.

     

Cyto-mechanoresponsive polyelectrolyte multilayer films

Cell adhesion processes take place through mechanotransduction mechanisms where stretching of proteins results in biological responses. In this work, we present the first cyto-mechanoresponsive surface that mimics such behavior by becoming cell-adhesive through exhibition of arginine-glycine-aspartic acid (RGD) adhesion peptides under stretching. This mechanoresponsive surface is based on polyelectrolyte multilayer films built on a silicone sheet and where RGD-grafted polyelectrolytes are embedded under antifouling phosphorylcholine-grafted polyelectrolytes. The stretching of this film induces an increase in fibroblast cell viability and adhesion.     

Polysaccharide films built by simultaneous or alternate spray: a rapid way to engineer biomaterial surfaces

We investigated polysaccharide films obtained by simultaneous and alternate spraying of a chitosan (CHI) solution as polycation and hyaluronic acid (HA), alginate (ALG), and chondroitin sulfate (CS) solutions as polyanions. For simultaneous spraying, the film thickness increases linearly with the cumulative spraying time and passes through a maximum for polyanion/CHI molar charge ratios lying between 0.6 and 1.2. The size of polyanion/CHI complexes formed in solution was compared with the simultaneously sprayed film growth rate as a function of the polyanion/CHI molar charge ratio. A good correlation was found. This suggests the importance of polyanion/polycation complexation in the simultaneous spraying process. Depending on the system, the film topography is either liquid-like or granular. Film biocompatibility was evaluated using human gingival fibroblasts. A small or no difference is observed in cell viability and adhesion between the two deposition processes. The CHI/HA system appears to be the best for cell adhesion inducing the clustering of CD44, a cell surface HA receptor, at the membrane of cells. Simultaneous or alternate spraying of CHI/HA appears thus to be a convenient and fast procedure for biomaterial surface modifications.     

Synthesis of stereopentad analogues of the C14-C22 segment of callystatin A through additions of chiral allenylzinc reagents to stereotriads.

The addition of (P)- and (M)-allenylzinc reagents, prepared in situ through Pd-catalyzed metalation of (R)- and (S)-3-butyn-2-ol mesylates, to diastereomeric stereotriad aldehydes 8, 13, 18, and 23 of syn,syn, syn,anti, anti,anti, and anti,syn stereochemistry was examined. Additions to the former two aldehydes afforded the four anti adducts with high diastereoselectivity and negligible mismatching. Significant mismatching was observed with the latter two aldehydes and the (M)-allenylzinc reagent. An evaluation of possible transition states is presented in consideration of steric and dipolar control elements.