Potential for micromachined actuation of ultra-wide continuously tunable optoelectronic devices

Tailored scaling represents a principle of success that, both in nature and in technology, allows the effectiveness of physical effects to be enhanced. Mutation and selection in nature are imitated in technology, e.g. by model calculation and design. Proper scaling of dimensions in natural photonic crystals and our fabricated artificial 1D photonic crystals (DBRs, distributed Bragg reflectors) enable efficient diffractive interaction in a specific spectral range. For our optical microsystems we illustrate that tailored miniaturization may also increase the mechanical stability and the effectiveness of spectral tuning by thermal and electrostatic actuation, since the relative significance of the fundamental physical forces involved considerably changes with scaling. These basic physical principles are rigorously applied in micromachined 1.55-μm vertical-resonator-based devices. We modeled, implemented and characterized 1.55-μm micromachined optical filters and vertical-cavity surface-emitting laser devices capable of wide, monotonic and kink-free tuning by a single control parameter. Tuning is achieved by mechanical actuation of one or several air-gaps that are part of the vertical resonator including two ultra-highly reflective DBR mirrors of strong refractive index contrast: (i) Δn=2.17 for InP/air-gap DBRs (3.5 periods) using GaInAs sacrificial layers and (ii) Δn=0.5 for Si₃N₄/SiO₂ DBRs (12 periods) with a polymer sacrificial layer to implement the air-cavity. In semiconductor multiple air-gap filters, a continuous tuning of >8% of the absolute wavelength is obtained. Varying the reverse voltage (U=0–5 V) between the membranes (electrostatic actuation), a tuning range of >110 nm was obtained for a large number of devices. The correlation of the wavelength and the applied voltage is accurately reproducible without any hysteresis. In two filters, tuning of 127 and 130 nm was observed for about ΔU=7 V. The extremely wide tuning range and the very small voltage required are record values to the best of our knowledge. For thermally actuated dielectric filters based on polymer sacrificial layers, Δλ/ΔU=-7 nm/V is found. Received: 10 May 2002 / Published online: 8 August 2002     

Magnetic anisotropy of textured CrO2 thin films investigated by X-ray magnetic circular dichroism

Highly a-axis-textured CrO₂ films have been deposited on Al₂O₃ (0001) substrates by chemical vapor deposition. CrO₂ has been found to have highly a-axis (010)-oriented columnar growth on a Cr₂O₃ (0001) initial layer. The six-fold surface symmetry of the Cr₂O₃ initial layer leads to three equivalent in-plane orientations of the a-axis-oriented CrO₂ unit cell. We report Cr L_2,3 X-ray magnetic circular dichroism data along the surface normal and at 60° off-normal sample orientation. For a 60° sample alignment, a strong increase of the projected orbital moment could be observed for unoccupied majority t_2g states using moment analysis. Therefore, the c axis is identified as the intrinsic magnetic easy axis of CrO₂. In addition, a small spin moment and a very strong magnetic dipole term T_z have been found. Received: 8 January 2002 / Accepted: 8 January 2002     

Spray thermometry using thermographic phosphors

In this study a novel technique for 2D spray temperature measurement is presented. For this purpose the thermographic phosphor (TP) Mg₄GeO_5.5F:Mn was dispersed in n-dodecane and atomised using a conventional semi solid-cone nozzle. The thermographic phosphor was excited electronically by a frequency tripled Nd:YAG laser (355 nm). An ICCD-camera in combination with an image doubler detected the subsequently emitted phosphorescence at both peak emission wavelengths located at 633 nm and 659 nm, respectively. Utilising suitable calibration measurements, the local spray temperature was determined by evaluating the intensity ratio of both emission wavelengths. To the knowledge of the authors this is the first approach of spray temperature measurement exploiting the temperature dependent intensity ratio of thermographic phosphors. PACS 07.20.Dt; 32.50.+d     

Modification of single molecule fluorescence by a scanning probe

We examine the optical near-field interaction between different types of scanning tips and single oriented fluorescent molecules. We demonstrate the influence of a tip on the excitation intensity as well as on the integrated fluorescence signal, the excited state lifetime, and the angular emission of single molecules. By using a standard model describing the radiation of an oscillating dipole close to a nanosphere or a flat interface, we interpret our observations and describe some central criteria for obtaining fluorescence enhancement or quenching. PACS 33.80.-b; 07.79.Fc; 78.90.+t     

Stability of Crystalline Ion Beams

Hyperfine Interactions - In this paper, the conditions for which three-dimensional crystalline ion beams were attained in the rf quadrupole storage ring PALLAS at a velocity of around 2800 m/s are...     

Stratifiable Families of Extremals and Sufficient Conditions for Optimality in Optimal Control Problems

It is shown that, if a parametrized fämily of extremals F can be stratified in a way compatible with the flow map generated by F, then those trajectories of the family which realize the minimal values of the cost in F are indeed optimal in comparison with all trajectories which lie in the region R covered by the trajectories of F. It is not assumed that F is a field covering the state space injectively. As illustration, an optimal synthesis is constructed for a system where the flow of extremals exhibits a simple cusp singularity.     

Investigating and ordering Quadrilaterals and their analogies in space—problem fields with various aspects

Problem fields with one or two generating problems and possibilities of varying existing problems give a good chance for self-activities of students and can be used for reaching different general aims. In this paper some topics concerning quadrilaterals will be presented. I hope they will animate teachers for more problem orientation in mathematics education. First we will reflect about different types of convex and non-convex quadrilaterals and possibilities of ordering them. Then we focus on middle-quadrilaterals and types of quadrilaterals with special middle-quadrilaterals as well as their logical ordering. Finally we investigate the analogies in space to the parallelogram and its sub-types and order them in the “house of parallelepipeds”.     

Some Further Properties of the Accelerated Kerr-Schild Metrics

We extend the previously found accelerated Kerr-Schild metrics for Einstein-Maxwell-null dust and Einstein-Born-Infeld-null dust equations to the cases including the cosmological constant. This way we obtain the generalization of the charged de Sitter metrics in static space-times. We also give a generalization of the zero acceleration limit of our previous Einstein-Maxwell and Einstein-Born-Infeld solutions.     

Measurement of the K α to L α and K β to L β intensity ratios of seven elements in the atomic number range 52≤ Z ≤62 using photoionization at 59.5 keV1

The Kα to Lα and Kβ to Lβ intensity ratios of seven elements have been measured following photoionization at 59.5 keV by using a Si (Li) detector (FWHM=155 eV at 5.96 keV). The intensity ratios were determined by measuring K and L x-rays emitted from a standard target of a given element. The theoretical values of the Kα to Lα and Kβ to Lβ intensity ratios were calculated using theoretically tabulated values of shell/subshell photoionization cross sections, fluorescence yields, Coster-Kronig transition probabilities, and radiative decay rates for ηKLi≠ and ηKLi=0. The measured values are in good agreement with theoretical results. From Optika i Spektroskopiya, Vol. 97, No. 2, 2004, pp. 186–189. Original English Text Copyright ? 2004 by A. Kü?ük?nder, S?ğüt, E. Kü?ük?nder, Büyükkasap. This article was submitted by the authors in English.