Fe2O3/TiO2纳米管阵列的制备及其光催化性能

在钛基体上采用阳极氧化法制备了TiO₂纳米管阵列,采用化学浴方法在TiO₂纳米管阵列上修饰了Fe₂O₃纳米颗粒.利用扫描电镜、X射线衍射和紫外可见漫反射光谱等手段对材料进行了表征,同时测试了材料的光电化学性能及其光催化降解亚甲基蓝染料废水的性能.结果表明,Fe₂O₃纳米颗粒的修饰将TiO₂纳米管阵列的光响应拓宽至可见光区域,提高了光电流,Fe₂O₃/TiO₂纳米管阵列的光电流是未修饰的TiO₂纳米管阵列的9倍.而在光催化反应中,亚甲基蓝最高降解率可达80%,比未修饰的TiO₂纳米管阵列高出30%.     

用经验模型评估环境样品测量不确定度

利用水样、土壤和沉积物标准样品定值数据,建立了评估环境样品测量结果不确定度的经验模型。讨论了判断模型质量的指标。用建立的经验模型估算了实际标样和能力验证数据不确定度,并与实测结果进行了比较。探讨了利用本模型计算的相对标准偏差允许限用于实验室内部质量管理与控制的可行性。经验模型能帮助客户判断送检样品检测结果在临界值时能否满足相关要求。     

飞秒激光辐照Tm:YAG晶体的紫外发光研究(英文)

本文报道了室温下飞秒激光辐照Tm∶YAG晶体的紫外光上转换荧光。Tm3+荧光的强度与泵浦光的功率之间的依赖关系揭示了晶体的上转换过程由三光子吸收过程所主导。研究表明上能级粒子的增加来自于Tm3+吸收一个泵浦光子跃迁到3H4能级后再吸收两个泵浦光子,然后离子跃迁至下能级产生上转换荧光。     

丙烯腈-衣康酸基纳米纤维纱线的热稳定及碳化研究

碳纳米纤维主要以聚丙烯腈(PAN)作为前驱体,通过纺丝、热稳定、碳化等后处理工艺制备而得.但是,PAN基纳米纤维取向度低、致密性差,热稳定后环化度低,碳化后导电性差等缺点阻碍其在高性能碳纳米纤维领域的发展.因此,在PAN分子链中引入衣康酸(IA),通过溶液聚合法合成了P(AN-co-IA)共聚物并通过静电纺丝法制备了P...     

Low-temperature Heat Capacities and Thermodynamic Properties of Hydrated Sodium Cupric Arsenate [ NaCuAsO4·1.5H2O(s)]

Low-temperature heat capacities of the solid compound NaCuAsO4 · 1.5H2O(s) were measured using a precision automated adiabatic calorimeter over a temperature range of T = 78 K to T = 390 K. A dehydration process occurred in the temperature range of T = 368-374 K. The peak temperature of the dehydration was observed to be TD = (371.828±0.146) K by means of the heat-capacity measurement. The molar enthalpy and entropy of the dehyperimental values of heat capacities for the solid(Ⅰ) and the solid-liquid mixture(Ⅱ) were respectively fitted to two polynomial equations by the least square method. The smoothed values of the molar heat capacities and the fundamental thermodynamic functions of the sample relative to the standard reference temperature 298.15 K were tabulated at an interval of 5 K.     

一类两体三参量态的量子纠缠特性

讨论了一类三参量量子态的纠缠特性.计算了2(×)n量子系统该类态的concurrence,讨论了其形成纠缠度的下限.并计算了m(×)n量子系统(2≤m≤n)该类态的负值度,得到了解析表达式.研究表明参量θ=π/4时,该类量子态的纠缠达到最大值,并归结为已有文献研究的一类二参量量子态.对于2(×)n量子系统三参量量子态,其concurrence等于负值度,所有的PPT态都是可分离的,所有的NPT态都是纠缠的.对于高维情形,三参量态就没有类似的结论.     

人造复眼成像系统研究的新进展

人造复眼成像系统具有体积小、功耗低、视角范围广等优点，是一种应用前景非常广阔的光成像系统。综述了人造复眼成像系统的研究背景及最新的研究进展，其中包宿基于不同仿生设计理念的各种新型人造复眼结构以及能够实现诸如彩色成像、指纹识别、全视角成像等新功能的实验系统；展望了人造复眼成像系统今后的研究方向。     

Bond lengths and bond strengths in weak and strong chemisorption: N2, CO,and CO/H on nickel surfaces

New chemical-state-specific scanned-energy mode photoelectron diffraction experiments and density functional theory calculations, applied to CO, CO/H, and N2 adsorption on Ni(100), show that chemisorption bond length changes associated with large changes in bond strength are small, but those associated with changes in bond order are much larger, and are similar to those found in molecular systems. Specifically, halving the bond strength of atop CO to Ni increases the Ni-C distance by 0.06 A, but halving the bond order (atop to bridge site) at fixed bond strength causes an increase of 0.16 A.     

Spatial Carrier Bi-frequency Fourier Transform Profilometry for the 3-D Shape Measurement of Object with Discontinuous Height Steps

1 IntroductionProjecting a single frequency lfringe pattern upon an Object and observing itsdeformation from a different view angle has been a common method for various threedimensional shape measurement techniques. An autpmatic analysis of the fringepatterns is normally carried out either by the FOurier transform method[IJ or by phasestepping['] of the fringe patterns. HOWever, these techniques have a disadvantage ofprincipal importance, the so-called indetedrinaCy tO a factor Of Zap, or …     

孔壁部分有序化的介孔二氧化硅材料的合成与表征

采用一种“改进的二次晶化”的方法处理介孔二氧化硅SBA-15. 用X射线衍射(XRD)、 透射电镜(TEM)、 电子衍射(ED)、 红外光谱(FTIR)以及固体核磁共振(NMR)等多种技术对样品进行了表征.　结果表明， 在所得样品的孔壁中, 原子的排列方式与普通介孔二氧化硅材料的孔壁不同， 显示一定程度的有序性. 同时, 高度有序的介孔结构得到很好的保持, 且样品的水热稳定性大幅度提高.