Local magnetism of Rh in Ni-Rh alloys near the critical composition for ferromagnetism

Local magnetic behaviour of Rh implanted into Ni-Rh alloys near the critical Rh compositionx=0.37 has been studied using the TDPAC method. The observed Curie-Weiss type local susceptibility reflects the presence of large d spin polarization around Rh yielding a total moment of 4.7 _B. Our results show that the magnetism of Rh in the alloys depends strongly on the number of Ni near neighbour atoms.     

The electrical properties of semiconductor/metal,semiconductor/liquid,and semiconductor/conducting polymer contacts

Critical comparisons are drawn between the basic electrical properties of semiconductor/metal, semiconductor/liquid, and semiconductor/conducting polymer junctions. A theoretical model is developed to describe the basic current-voltage properties of semiconductor contacts, with emphasis on the contrasts between ideal and observed behavior. Using the concepts from this model, the characteristics of a variety of semiconductor contacts are evaluated. The discussion focuses on the following semiconductors: Si, GaAs, InP, and II-VI compounds based on the Cd-(chalcogenide) materials.     

Electroweak tests with τ leptons at LEP

We report on two sensitive tests of lepton universality carried out by the 4 LEP experiments at the Z⁰ pole. From measurements of the τ polarization in e⁺ e^?→τ ⁺ τ ^?, the ratios of the vector and axial vector coupling constants of the electron and the tau lepton to the weak neutral current are obtained to beg _{v e} /g _{a e} =0.066±0.015 andg _{V τ} /g _{A τ} =0.070±0.009 respectively. From measurement of the τ lifetime and the τ leptonic branching ratios, the ratio of the coupling constants describing weak leptonic decays of the τ and the μ is measured to beG _τ /G _μ =0.996±0.008.     

Influence of post-deposition annealing on the structural,optical and electrical properties of Li and Mg co-doped ZnO thin films deposited by sol–gel technique

Lithium (Li) and magnesium (Mg) co-doped zinc oxide (ZnO) thin films were deposited by sol–gel method using spin coating technique. The films were deposited on glass substrates and annealed at different temperatures. The effects of annealing temperature on the structural, optical and electrical properties of the deposited films were investigated using X-ray diffraction (XRD), Ultraviolet–Visible absorption spectra (UV–VIS), photoluminescence spectra (PL), X-ray photo electron spectroscopy (XPS) and Hall measurements. XRD patterns indicated that the deposited films had a polycrystalline hexagonal wurtzite structure with preferred (0 0 0 2) orientation. All films were found to exhibit a good transparency in the visible range. Analysis of the absorption edge revealed that the optical band gap energies of the films annealed at different temperatures varies between 3.49 eV and 3.69 eV. Room temperature PL spectra of the deposited films annealed at various temperatures consist of a near band edge emission and visible emission due to the electronic defects, which are related to deep level emissions, such as oxide antisite (O_Zn), interstitial zinc (Zn_i), interstitial oxygen (O_i) and zinc vacancy (V_Zn) which are generated during annealing process. The influence of annealing temperature on the chemical state of the dopants in the film was analysed by XPS spectra. Ion beam analysis (Rutherford back scattering) experiments were performed to evaluate the content of Li and Mg in the films. Hall measurements confirmed the p-type nature of the deposited films.     

Modify SRS-induced crosstalk with variety of fiber in SCM–WDM transmission links

In this paper, the SRS-induced crosstalk has been evaluated in a SCM–WDM communication links at different modulation frequencies and transmission lengths for variety of fiber. Results show that SRS-induced crosstalk dominates at low frequency. As the dispersion and effective area of fiber (A_eff) decreases, initially the crosstalk remains high and then it decreases with increase in modulation frequency. The present work shows that out of five different types of fiber, standard single mode fiber (SMF) has minimum crosstalk (−78 to −38) dB, (−55 to −33) dB and (−46 to −34) dB at modulation frequencies, transmission lengths and optical powers. Dispersion compensation fiber (DCF) has maximum crosstalk (−60 to −12) dB, (−37 to −12) dB and (−27 to −12) dB at modulation frequencies and transmission lengths.     

Enhancement in electrochemical properties of ionic liquid-based nanocomposite polymer electrolytes by 100 MeV Si9+ swift heavy ion irradiation

Swift heavy ion (SHI) irradiation has been used as a tool to enhance the electrochemical properties of ionic liquid-based nanocomposite polymer electrolytes dispersed with dedoped polyaniline (PAni) nanorods; 100 MeV Si⁹⁺ ions with four different fluences of 5?×?10¹⁰, 1?×?10¹¹, 5?×?10¹¹, and 1?×?10¹² ions cm^?2 have been used as SHI. XRD results depict that with increasing ion fluence, crystallinity decreases due to chain scission up to fluence of 5?×?10¹¹ ions cm^?2, and at higher fluence, crystallinity increases due to cross-linking of polymer chains. Ionic conductivity, electrochemical stability, and dielectric properties are enhanced with increasing ion fluence attaining maximum value at the fluence of 5?×?10¹¹ ions cm^?2 and subsequently decrease. Optimum ionic conductivity of 1.5?×?10^?2 S cm^?1 and electrochemical stability up to 6.3 V have been obtained at the fluence of 5?×?10¹¹ ions cm^?2. Ac conductivity studies show that ion conduction takes place through hopping of ions from one coordination site to the other. On SHI irradiation, amorphicity of the polymer matrix increases resulting in increased segmental motion which facilitates ion hopping leading to an increase in ionic conductivity. Thermogravimetric analysis (TGA) measurements show that SHI-irradiated nanocomposite polymer electrolytes are thermally stable up to 240–260 °C.