Direct Oxidation of Propylene with Molecular Oxygen Over Ti-Modified Sulfated Zirconia Catalyst, 2. In Situ Diffuse Reflectance FT-IR Study

During the reaction of propylene with O₂, in situ Diffuse Reflectance FT-IR measurements were performed over Ti-modified SZ and SZ catalysts. Without O₂, the main bands characteristic of (branched) hydrocarbons, formed by oligomerization leading to, finally, carbonaceous residue, appeared within the range of 3900-2750 cm^-1, which was affected by the bands of surface OH groups. Investigation of these IR bands showed the role of molecular oxygen not only to limit the formation of carbonaceous species on the catalyst surface, but also to form oxygenates and these findings were in good agreement with the results of catalytic reaction.     

Module-based assembly of copper(II) chloranilate compounds: syntheses, crystal structures, and magnetic properties of [[Cu(2)(CA)(terpy)(2)][Cu(CA)(2)]](n)() and [[Cu(2)(CA)(terpy)(2)(dmso)(2)][Cu(CA)(2)(dmso)(2)](EtOH)](n)(H(2)CA = chloranilic acid, terpy = 2,2':6',2' '-terpyridine, dmso = dimethyl sulfoxide)

Two new copper(II) compounds of chloranilate and 2,2':6',2' '-terpyridine have been synthesized, and the structures have been solved by the single-crystal X-ray diffraction method. The crystal structure of [[Cu(2)(CA)(terpy)(2)][Cu(CA)(2)]](n)(1), where H(2)CA = chloranilic acid and terpy = 2,2':6',2' '-terpyridine, consists of two modules, the dimer unit [Cu(2)(CA)(terpy)(2)](2+) and the anionic mononuclear unit [Cu(CA)(2)](2)(-), forming an alternated chain. The chain is stabilized by semicoordinating and additional but efficient secondary bonding interactions. The crystal structure of [[Cu(2)(CA)(terpy)(2)(dmso)(2)][Cu(CA)(2)(dmso)(2)](EtOH)](n)(2), where dmso = dimethyl sulfoxide, consists of solvent molecules and two discrete modules, the dimer unit [Cu(2)(CA)(terpy)(2)(dmso)(2)](2+) and the anionic mononuclear unit [Cu(CA)(2)(dmso)(2)](2)(-). The dimer units form a layer by secondary bonding interactions, and the monomer units and ethanol molecules are introduced between the layers. The magnetic properties of 1 and 2 have been investigated in the temperature range 2.0-300 K. A weak ferromagnetic interaction was observed in 1, J(a) = 2.36 cm(-)(1) and zJ(b) = -0.68 cm(-)(1) while no exchange coupling was observed in 2.     

Short Radiative Lifetime and Non-Triplet Sensitization in Near-Infrared-Luminescent Yb(III) Complex with Tripodal Schiff Base

We prepared Ln(III) (Ln=Eu, Gd, and Yb) complexes with a tripodal Schiff base, tris[2-(5-methylsalicylideneimino)ethyl]amine (H₃L) and studied their photophysical properties. Upon ligand excitation, YbL showed Yb(III)-centered luminescence in the near-infrared region. While the overall quantum yield (0.60(1)%) of YbL in acetonitrile was moderate among the reported values for Yb(III) complexes, its radiative lifetime (0.33(2) ms) was significantly shorter than those reported previously. We propose that the ligand-to-metal charge-transfer (LMCT) state mediated the sensitization in YbL. The emission and excitation spectra of EuL indicated the participation of the LMCT state in the sensitization. The radiative lifetime (0.84(7) ms) for EuL in the solid state was rather short compared to those of reported Eu(III) complexes. Our results show that the Yb(III) complex with the Schiff base ligand has two features: the short radiative lifetime and the non-triplet sensitization path.     

Formulation for XPS spectral change of oxides by ion bombardment as a function of sputtering time

XPS measurement revealed that the original state of TiO₂ was changed to Ti₂O₃ and TiO by ion bombardment. TiO₂ decreased and Ti₂O₃ increased at the initial stage. TiO increased at a later stage than Ti₂O₃. Each of them saturated after enough sputtering time.A formulation was proposed in order to explain the change of XPS spectra for oxides as a function of ion sputtering time. This formulation was based on reaction equations that contain two reduction processes (from TiO₂ to Ti₂O₃ and from Ti₂O₃ to TiO), and sputtering effects. Using four fitting parameters (two reduction coefficients, sputtering yield and information depth), the present formula was fitted to the experimental results. The fitting results agree satisfactorily with the experimental results. The calculation shows that the reduction coefficient from TiO₂ to Ti₂O₃ is about ten times larger than that from Ti₂O₃ to TiO. This calculation predicts that surface composition of an oxide that is changed by ion bombardment will reach a different value depending on its bulk composition. Moreover, the present formulation can determine the chemical states of compounds changed by ion bombardment.     

Laser spectroscopy of trapped 7Be and 10Be at a prototype slow RI-beam facility of RIKEN

A next-generation slow radioactive nuclear ion beam facility (SLOWRI) which provides slow, high-purity and small emittance ion beams of all elements is being build as one of the principal facilities at the RIKEN RI-beam factory (RIBF). High energy radioactive ion beams from the projectile fragment separator BigRIPS are thermalized in a large gas catcher cell. The thermalized ions in the gas cell are guided and extracted to a vacuum environment by a combination of dc electric fields and inhomogeneous rf fields (rf carpet ion guide). From there the slow ion beam is delivered via a mass separator and a switchyard to various devices: such as an ion trap, a collinear fast beam apparatus, and a multi-reflection time of flight mass spectrometer. In the R&D works at the present RIKEN facility, an overall efficiency of 5% for a 100A MeV ⁸Li ion beam from the present projectile fragment separator RIPS was achieved and the dependence of the efficiency on the ion beam intensity was investigated. Recently our first spectroscopy experiment at the prototype SLOWI was performed on Be isotopes. Energetic ions of ¹⁰Be and ⁷Be from the RIPS were trapped and laser cooled in a linear rf trap and the specific mass shifts of these isotopes were measured for the first time.     

Investigation of the influence of cell density of human fibroblasts cryopreserved inside collagen sponges at various cooling rates

The influence of cell density of cells cryopreserved inside a collagen matrix at various cooling rates was investigated. Human fibroblasts were three-dimensionally cultured for 2 days in a collagen sponge (20 mm in diameter and 1 mm in thickness) as an extracellular matrix to imitate biological tissue (artificial tissue). Different cell densities for the artificial tissue were used, from 10(5) to 10(7) cells/cm(3). Four artificial tissues were first stacked in a test chamber, frozen at a cooling rate of 0.3 to 50 degrees C/min in a solution of Dulbecco's Modified Eagle Medium, 20% fetal bovine serum and 10% dimethylsulfoxide, kept frozen below -185 degrees C for 2 hours, and then finally thawed. Membrane integrity of fibroblasts using a trypan blue exclusion assay was evaluated as an index for post-thaw cellular viability. Results show that with increasing cell density, the post-thaw membrane integrity decreased. Therefore, in the cryopreservation of biological tissue, it seems high cell density is one factor which causes a decline in viability.     

A novel liquid plasma AOP device integrating microwaves and ultrasounds and its evaluation in defluorinating perfluorooctanoic acid in aqueous media

A simplified and energy-saving integrated device consisting of a microwave applicator and an ultrasonic homogenizer has been fabricated to generate liquid plasma in a medium possessing high dielectric factors, for example water. The microwave waveguide and the ultrasonic transducer were interconnected through a tungsten/titanium alloy stick acting both as the microwave antenna and as the horn of the ultrasonic homogenizer. Both microwaves and ultrasonic waves are simultaneously transmitted to the aqueous media through the tungsten tip of the antenna. The microwave discharge liquid plasma was easily generated in solution during ultrasonic cavitation. The simple device was evaluated by carrying out the degradation of the perfluorooctanoic acid (PFOA), a system highly recalcitrant to degradation by conventional advanced oxidation processes (AOPs). PFOA is 59% degraded in an aqueous medium after only 90 s of irradiation by the plasma. Intermediates were identified by electrospray mass spectral techniques in the negative ion mode.