Separation and simultaneous determination of cobalt, nickel and copper with 2-(4-methyl-2-quinolylazo)-5-diethylaminophenol by reversed-phase high-performance liquid chromatography

Performance of six quinolylazo compounds was studied as a pre-column derivatizing reagent for the separation of metal ions in the reversed-phase high-performance liquid chromatography. 2-(4-Methyl-2-quinolylazo)-5-diethylaminophenol (QADP) was suited for the determination of Co, Ni and Cu in the presence of a large amount of Fe. The detection limits under the optimized conditions [stationary phase: L-column ODS; mobile phase: acetone-water (62:38, v/v) containing 0.01 M NH(4)SCN and 0.01 M 2-morpholinoethanesulfonic acid-NaOH (pH 6); injection volume: 10 mul] were 0.24 ng for Co, 0.22 for Ni and 0.53 for Cu. This method was successfully applied to the determination of these metal ions in a standard steel sample.     

Development of a cooled He*(23S) beam source for measurements of state-resolved collision energy dependence of Penning ionization cross sections: Evidence for a stereospecific attractive well around methyl group in CH3CN

A low-temperature discharge nozzle source with a liquid-N(2) circulator for He*(2(3)S) metastable atoms has been developed in order to obtain the state-resolved collision energy dependence of Penning ionization cross sections in a low collision energy range from 20 to 80 meV. By controlling the discharge condition, we have made it possible to measure the collision energy dependence of partial ionization cross sections (CEDPICS) for a well-studied system of CH(3)CN+He*(2(3)S) in a wide energy range from 20 to 350 meV. The anisotropic interaction potential energy surface for the present system was obtained starting from an ab initio model potential via an optimization procedure based on classical trajectory calculations for the observed CEDPICS. A dominant attractive well depth was found to be 423 meV (ca. 10 kcal/mol) at a distance of 3.20 A from the center of mass of CH(3)CN in the N-atom side along the CCN axis. In addition, a weak attractive well (ca. 0.9 kcal/mol) surrounding the methyl group (-CH(3)) has been found and ascribed to the interaction between an unoccupied molecular orbital of CH(3)CN and 2s atomic orbital of He*(2(3)S).     

Homoleptic cyclometalated iridium complexes with highly efficient red phosphorescence and application to organic light-emitting diode

Phosphorescence studies of a series of facial homoleptic cyclometalated iridium(III) complexes have been carried out. The complexes studied have the general structure Ir(III)(C-N)(3), where (C-N) is a monoanionic cyclometalating ligand: 2-(5-methylthiophen-2-yl)pyridinato, 2-(thiophen-2-yl)-5-trifluoromethylpyridinato, 2,5-di(thiophen-2-yl)pyridinato, 2,5-di(5-methylthiophen-2-yl)pyridinato, 2-(benzo[b]thiophen-2-yl)pyridinato, 2-(9,9-dimethyl-9H-fluoren-2-yl)pyridinato, 1-phenylisoquinolinato, 1-(thiophen-2-yl)isoquinolinato, or 1-(9,9-dimethyl-9H-fluoren-2-yl)isoquinolinato. Luminescence properties of all the complexes at 298 K in toluene are as follows: quantum yields of phosphorescence Phi(p) = 0.08-0.29, emission peaks lambda(max) = 558-652 nm, and emission lifetimes tau = 0.74-4.7 micros. Bathochromic shifts of the Ir(thpy)(3) family [the complexes with 2-(thiophen-2-yl)pyridine derivatives] are observed by introducing appropriate substituents, e.g., methyl, trifluoromethyl, or thiophen-2-yl. However, Phi(p) of the red emissive complexes (lambda(max) > 600 nm) becomes small, caused by a significant decrease of the radiative rate constant, k(r). In contrast, the complexes with the 1-arylisoquinoline ligands are found to have marked red shifts of lambda(max) and very high Phi(p) (0.19-0.26). These complexes are found to possess dominantly (3)MLCT (metal-to-ligand charge transfer) excited states and have k(r) values approximately 1 order of magnitude larger than those of the Ir(thpy)(3) family. An organic light-emitting diode (OLED) device that uses Ir(1-phenylisoquinolinato)(3) as a phosphorescent dopant produces very high efficiency (external quantum efficiency eta(ex) = 10.3% and power efficiency 8.0 lm/W at 100 cd/m(2)) and pure-red emission with 1931 CIE (Commission Internationale de L'Eclairage) chromaticity coordinates (x = 0.68, y = 0.32).     

UVB irradiation of normal human skin favors the development of type-2 T-cells in vivo and in primary dermal cell cultures

To determine the effect of UVB exposure on the balance of type-1 or type-2 T-cells in skin, we examined the expression of key markers interferon (IFN)-gamma and interleukin (IL)-4 in cryostat sections. IFN-gamma mRNA was clearly detectable in nonirradiated control skin, and IFN-gamma protein was found in 2% of the dermal CD3pos T-cells, whereas IL-4 mRNA was hardly detectable, and no IL-4 protein was found. In contrast, IL-4 mRNA expression increased upon irradiation, and IL-4 was found in 2% of the T-cells at day 2 after UVB-exposure. Concomitantly, IFN-gamma mRNA expression decreased, and IFN-gamma protein became absent. We also analyzed T-cells present in primary dermal cell cultures, which were used as an in vitro equivalent of the in vivo situation. As compared with T-cells from control skin, T-cells in dermal cell cultures from UVB-exposed skin displayed an increased IL-4 and decreased IFN-gamma expression. No such skewing occurred when the T-cells from irradiated skin were cloned in the absence of a dermal microenvironment. Except for an occasional positive T-cell, type-1-associated cell-surface markers (CCR5, CXCR3) or type-2 markers (CCR3, CD30, CRTH2) were undetectable in situ. But these markers were expressed on cultured dermal T-cells from UVB-exposed and control skin at a comparable level, but did not correlate with the IFN-gamma and IL-4 production. Altogether, UVB-induced changes of the dermal microenvironment favor the development of type-2 T-cells.     

Metal-complex assemblies constructed from the flexible hinge-like ligand H2bhnq: structural versatility and dynamic behavior in the solid state

Novel metal-complex assemblies constructed from the flexible hinge-like ligand H(2)bhnq (H(2)bhnq=2,2'-bi(3-hydroxy-1,4-naphthoquinone)) have been synthesized. The X-ray crystal structures of these compounds reveal that four types of architectures are accessible by variation of the metal ions. In copper(II) compounds 1-3, the chelating bhnq(2-) ions bridge copper(II) centers to form one-dimensional zigzag chains. The chains of 1-3 are arranged by hydrogen-bonding interactions and stacking interactions to produce porous structures. Cobalt(II) and zinc(II) compounds 4 and 5 form one-dimensional helical chains. In 4 and 5, the crystal packing induces spontaneous resolution of the helical chains with chiral cavities formed perpendicular to the helices. Nickel(II) compounds 6 and 7 form cyclic tetramers. The fourth architecture, a dimer (compound 8), is obtained by the reaction of zinc(II) and bhnq(2-) in MeOH. In these compounds, changes of the dihedral angles and the metal-coordination mode of the bhnq(2-) ion induce the structural versatility. The assemblies of the zigzag chains of the copper(II) compounds exhibit reversible vapochromic behavior. UV/Vis, powder X-ray diffraction, EPR, and adsorption isotherm measurements indicate that this vapochromic behavior is based on the hinge-like flexibility of the bhnq(2-) ion.     

Determination of bisphenol A in human breast milk by HPLC with column-switching and fluorescence detection

A highly sensitive HPLC method was developed for the determination of xenoestrogenic compound, bisphenol A (BPA) in human breast milk samples. After a two-step liquid-liquid extraction, BPA was derivatized with fluorescent labeling reagent, 4-(4,5-diphenyl-1H-imidazol-2-yl)benzoyl chloride (DIB-Cl). The excess fluorescent reagent could be removed effectively using a column-switching system. The separation of DIB-BPA from endogenous materials in milk was carried out on two C(18) columns and fluorescence intensity was monitored at 475 nm with the excitation of 350 nm. A good linearity (r = 0.994) was observed of BPA in the concentration range of 0.2-5.0 ng mL(-1) in breast milk, and the detection limit was 0.11 ng mL(-1) at a signal-to-noise ratio of 3. Intra- and inter-day precision (RSD, %) were less than 8.7 and 10.4, respectively. Twenty-three breast milk samples of healthy lactating women were analyzed for the BPA concentration; the mean value was 0.61 +/- 0.20 ng mL(-1), with no correlation to the lipid content of milk samples.     

Preconcentration and determination of calcium and magnesium in brine with flow-injection systems

On-line preconcentration on a chelating resin (Dowex A-1) and elution with 0.1 M hydorchloric acid is followed by spectrophotometry based on the metal complexes formed with 1- (2-hydroxy-4-diethylamino-1-phenylazo)-2-hydroxynaphthalene-3,6-disulfonic acid. The total concentration of calcium and magnesium is determined; in a second sample, calcium is masked with a ligand buffer containing excess of barium(II) and EGTA, and magnesium is determined. The calcium concentration is measured by difference. Magnesium (1–30 μg l^?1 and calcium (8– 10 μg l^?1) in 2.5 M sodium chloride can be determined. Calcium and magnesium in analytical reagent-grade sodium chloride and potassium chloride and primary standard sodium chloride are aslo determined. The method based on the exchange between calcium ions and Mg(EDTA) is proposed to enchance the sensitivity for calcium.     

Triple hydrogen bonds direct crystal engineering of metal-assembled complexes: the effect of a novel organic-inorganic module on supramolecular structure

Novel triply hydrogen bonded suprastructures based on [M(tdpd)2(L)2]2- (H2tdpd=1,4,5,6-tetrahydro-5,6-dioxo-2,3-pyrazinedicarbonitrile, L=solvent) and melamine-analogous cations have been synthesized and characterized. The use of anions containing two AAA sets from [M(tdpd)2(L)2]2- together with cations containing one DDD set (A=hydrogen-bond acceptor, D=hydrogen-bond donor) leads to the formation of complementary triply hydrogen bonded modules in the solid state. In all cases, the building module is further extended via additional hydrogen-bonding interactions to produce a tape, and tapes are assembled into sheets. These results show that a hydrogen-bonded module consisting of different kinds of building blocks, one of which is a metal complex that includes hydrogen-bond acceptor sites and the other is a hydrogen-bond donor molecule, will be attractive for constructing metal-containing supramolecular systems by the self-assembly technique.     

Electronic structures of exohedral lanthanide-C60 clusters

We have studied the electronic structures of several gas phase exohedral lanthanide (Ln)-C(60) clusters, Ln(n)C(60) (Ln=Pr, Ho, Tb, Tm, Eu, and Yb) with n=1-4, by photoionization spectroscopy of the neutrals and photoelectron spectroscopy of their anions. Both of the spectroscopic analyses reveal that most of the Ln atoms preferably take +3 oxidation states, while Eu atoms alone assume +2 oxidation states, and that C(60) accepts up to twelve donated electrons in Ln(n)C(60). An additional photoionization examination of the oxygen atom mixing into the Ln(n)C(60) clusters demonstrated that each oxygen atom reduces two electrons from C(60). This result implies that the number of accepted electrons in C(60) can be varied by a suitable choice of the number of Ln atoms and O atoms.