Sonochemical immobilization of noble metal nanoparticles on the surface of maghemite: mechanism and morphological control of the products

Aqueous sample solutions containing noble metal ions (HAuCl₄, Na₂PdCl₄, H₂PtCl₆), polyethyleneglycol monostearate, and magnetic maghemite nanoparticles were irradiated with high power ultrasound. Analyses of the products showed that noble metal ions were reduced by the effects of ultrasound, and the formed noble metal nanoparticles were uniformly immobilized on the surface of the maghemite. The present “one pot process” significantly simplifies the immobilization of noble metal nanoparticles on the surface of supports, compared with the conventional impregnation method. The average diameter of immobilized Au was 7–13 nm, and the diameters of Pd and Pt were several nm. The diameters depended upon the concentration of polyethyleneglycol monostearate and the concentration of noble metal ions, but not upon the maghemite concentration, indicating the possibility of the morphological controls of the products by adjusting these preparation conditions. The measurements of the average diameters and the numbers of immobilized Au nanoparticles obtained under various conditions suggest that the nucleation of Au does not occur on the surface of maghemite, but it might occur in the homogeneous bulk solution.     

Chemo- and stereoselective six-membered oxonium ylide formation–[2,3]-sigmatropic rearrangement of 2-diazo-3-ketoesters with dirhodium(II) catalyst and its application to the synthesis of (+)-tanikolide

Dirhodium(II)-catalyzed oxonium ylide formation–[2,3]-sigmatropic rearrangement of 6-allyloxy-2-diazo-3-ketoesters possessing a C-6 substituent is described. The reaction of 6-alkyl- or 6-aryl-substituted 6-allyloxy-2-diazo-3-ketoesters with a catalytic amount of Rh₂(S-PTTL)₄ proceeded in a chemoselective and stereoselective manner to provide 6-substituted 2-allyl-3-oxotetrahydropyran-2-carboxylates in good yields and with high diastereoselectivities. To demonstrate the utility of this sequential reaction, we conducted the total synthesis of (+)-tanikolide, in which the construction of the δ-lactone skeleton was achieved by employing a 2-iodobenzamide-catalyzed oxidative cleavage of tetrahydropyran-2-methanol.     

MOF‐on‐MOF: Oriented Growth of Multiple Layered Thin Films of Metal–Organic Frameworks

The precise alignment of multiple layers of metal–organic framework (MOF) thin films, or MOF‐on‐MOF films, over macroscopic length scales is presented. The MOF‐on‐MOF films are fabricated by epitaxially matching the interface. The first MOF layer (Cu₂(BPDC)₂, BPDC=biphenyl‐4,4′‐dicarboxylate) is grown on an oriented Cu(OH)₂ film by a “one‐pot” approach. Aligned second (Cu₂(BDC)₂, BDC=benzene 1,4‐dicarboxylate, or Cu₂(BPYDC)₂, BPYDC=2,2′‐bipyridine‐5,5′‐dicarboxylate) MOF layers can be deposited using liquid‐phase epitaxy. The co‐orientation of the MOF films is confirmed by X‐ray diffraction. Importantly, our strategy allows for the synthesis of aligned MOF films, for example, Cu₂(BPYDC)₂, that cannot be grown on a Cu(OH)₂ surface. We show that aligned MOF films furnished with Ag nanoparticles show a unique anisotropic plasmon resonance. Our MOF‐on‐MOF approach expands the chemistry of heteroepitaxially oriented MOF films and provides a new toolbox for multifunctional porous coatings.     

Concise Synthesis of Potassium Acyltrifluoroborates from Aldehydes through Copper(I)‐Catalyzed Borylation/Oxidation

Potassium acyltrifluoroborates (KATs) were prepared through copper(I)‐catalyzed borylation of aldehydes and subsequent oxidation. This synthetic route is characterized by the wide range of aldehydes accessible, favorable step economy, mild reaction conditions, and tolerance of various functional groups, and it enables the facile generation of a range of KATs, for example, bearing halide, sulfide, acetal, or ester moieties. Moreover, this method was applied to the three‐step synthesis of various α‐amino acid analogues that bear a KAT moiety on the C‐terminus by using naturally occurring amino acids as the starting material.     

Synthesis of A Pincer‐IrV Complex with A Base‐Free Alumanyl Ligand and Its Application toward the Dehydrogenation of Alkanes

A pincer‐iridium complex bearing a Lewis‐base‐free X‐type alumanyl ligand has been synthesized. X‐ray diffraction, NMR and IR spectroscopy, as well as XANES analysis confirmed its tetrahydrido‐Ir^V structure and Lewis acidity at the Al center as supported by DFT calculations. The resulting complex was applied as a catalyst for the transfer dehydrogenation of cyclooctane.     

A kinetics study of ligand substitution reaction on dinuclear platinum complexes: Stochastic versus deterministic approach

The kinetics on a basic ligand substitution reaction on dinuclear platinum complexes [Pt(PEt₃)₂PhPt(PEt₃)₂]²⁺ and [Pt(PEt₃)₂PhCOPhPt(PEt₃)₂]²⁺ , with the ligands pyridine and 3-chloropyridine, is studied. This is a fundamental step in a self-assembly, and the time evolution has been observed with a new experimental technique, QASAP (quantitative analysis of self-assembly process), which is recently developed by Hiraoka's group. As a result of numerical calculations based on master equation, we succeed in specifying the reaction rate constants with a simple reaction model. In addition, the time evolutions of all the intermediate components produced and consumed in chemical reaction are revealed, including those unobserved in the experiments. The convergence behavior of the existence ratios of specific chemical species calculated with the stochastic algorithm method is compared with those obtained from deterministic formalism based on rate equations, revealing a clear dependence on the number of constituent molecules. © 2018 Wiley Periodicals, Inc.     

Storage and retrieval of a squeezed vacuum

Storage and retrieval of a squeezed vacuum was successfully demonstrated using electromagnetically induced transparency. The squeezed vacuum pulse having a temporal width of 930 ns was incident on the laser cooled 87Rb atoms with an intense control light in a coherent state. When the squeezed vacuum pulse was slowed and spatially compressed in the cold atoms, the control light was switched off. After 3 mus of storage, the control light was switched on again, and the squeezed vacuum was retrieved, as was confirmed using the time-domain homodyne method.     

Doping induced evolution of Fermi surface in low carrier superconductor Tl-doped PbTe

We have performed high-resolution angle-resolved photoemission spectroscopy on Tl-doped PbTe. We observed a distinct energy shift of the valence band and core levels upon Tl doping, together with the evolution of a small hole pocket around the X[over] point in the Brillouin zone, while no clear evidence for the localized states near the Fermi level is observed. These experimental results suggest that direct hole doping into the valence band and resultant emergence of a small Fermi surface are responsible for the metallic conductivity in Tl-doped PbTe.     

Water vapor adsorption onto activated carbons prepared from cattle manure compost (CMC)

Activated carbons were prepared from cattle manure compost (CMC) using zinc chloride activation. The structural and surface chemical characteristics of CMC-based activated carbons were determined by N₂ adsorption-desorption and Boehm titration, respectively. The water vapor adsorption properties of the prepared activated carbons with various pore structure and surface nature were examined, and the mechanism of water adsorbed onto activated carbon was also discussed. The results show that the adsorption of water vapor on carbons begins at specific active sites at low relative humidity (RH), followed by micropore filling at medium RH through the formation of pentamer cluster of water molecules in the narrow micropores. The water vapor adsorption capacity of activated carbon is predominantly dependent on its pore volume and surface area. Although capillary condensation is not the mechanism for water adsorption onto activated carbon, water can adsorb on narrow mesopore to some extent.     

Effect of alcohol sources on synthesis of single-walled carbon nanotubes

The effect of oxidant species forming an alcohol molecule for hot-filament chemical vapor deposition (HFCVD) on single-walled carbon nanotubes (SWCNTs) growth has been investigated. To use a graphite rod as a filament for HFCVD to decompose alcohol sources, contamination-free sample surface can be obtained and SWCNTs are successively and densely grown at a lower temperature than those by conventional thermal CVD. It is found that the higher the molecule number of alcohol among CH₃OH, C₂H₅OH, and 2-C₃H₇OH is, the lower the initial growth rate of SWCNTs is. As for CH₃OH, diameter distribution of SWCNTs is dynamically changed with the growth time passed, and a negative growth rate is observed at the later stage of growth. The growth kinetics depending on the alcohol sources is discussed on the basis of a capability of the oxidant species to burn away SWCNTs and deactivation of Co catalysts used for the growth.