Synthesizing Interpenetrated Triazine-based Covalent Organic Frameworks from CO2

Crystalline triazine-based covalent organic frameworks (COFs) are aromatic nitrogen-rich porous materials. COFs typically show high thermal/chemical stability, and are promising for energy applications, but often require harsh synthesis conditions and suffer from low crystallinity. In this work, we propose an environmentally friendly route for the synthesis of crystalline COFs from CO₂ molecules as a precursor. The mass ratio of CO₂ conversion into COFs formula unit reaches 46.3 %. The synthesis consists of two steps; preparation of 1,4-piperazinedicarboxaldehyde from CO₂ and piperazine, and condensation of the dicarboxaldehyde and melamine to construct the framework. The CO₂-derived COF has a 3-fold interpenetrated structure of 2D layers determined by powder X-ray diffraction, high-resolution transmission electron microscopy, and select-area electron diffraction. The structure shows a high Brunauer–Emmett–Teller surface area of 945 m² g⁻¹ and high stability against strong acid (6 M HCl), base (6 M NaOH), and boiling water over 24 hours. Post-modification of the framework with oxone has been demonstrated to modulate hydrophilicity, and it exhibits proton conductivity of 2.5×10⁻² S cm⁻¹ at 85 °C, 95 % of relative humidity.     

A theoretical study of the dehydration and the dehydrogenation processes of alcohols on metal oxides using MOPAC

Using a semi-empirical molecular orbital method, PM3, and 2-propanol as an example, the dehydration and the dehydrogenation processes of alcohol on oxide catalysts were studied. The catalysts addressed here were four kinds of oxides (Al₂O₃, SiO₂, ZnO, CdO) whose reaction selectivities had been experimentally determined. The usual models consisting of a surface metal ion, several oxide ions and an isopropoxy group were used in calculations. For the dehydration, heats of formation of the models were calculated at each point of the process where the distance between a β-hydrogen of the group and a basic site (i.e. oxygen of the group or a surface oxide ion) or a metal ion was gradually shortened, or where the length of the C–O bond of the group was gradually increased. A reasonable dehydration mechanism was estimated by comparing activation energies calculated from the transitions of the heats of formation. The most probable dehydrogenation mechanism was also estimated in a similar way by gradually making an -hydrogen close to a surface oxide ion, the metal ion or a surface proton. It was concluded that the dehydration proceeds by scission of the C–O bond of the group after its oxygen was attacked by some electrophile on the surface and that the dehydrogenation proceeds by a mechanism in which an -hydrogen of the group was extracted by the metal ion.

Based on the dehydration mechanism thus deduced, alkoxy groups generated by adsorption of the primary, secondary and tertiary alcohols on SiO₂ were calculated in order to estimate the activation energies of their decompositions. In result, the order of the energies was found to be in good agreement with that of the decomposition rates experimentally determined by Kitahara. This agreement gives support to the validity of the mechanism deduced for the dehydration of alcohol.     

Guerbet reaction of primary alcohols leading to beta-alkylated dimer alcohols catalyzed by iridium complexes

[IrCl(cod)]2 and [Cp*IrCl2]2 complexes catalyzed efficiently the Guerbet reaction of primary alcohols to beta-alkylated dimer alcohols in good yields. For instance, the reaction of 1-butanol in the presence of [Cp*IrCl2]2 (1 mol %), t-BuOK (40 mol %), and 1,7-octadiene (10 mol %) produced 2-ethyl-1-hexanol in 93% yield. Various primary alcohols undergo the Guerbet reaction under the influence of Ir complexes to give the corresponding dimer alcohols in good yields. This method provides an alternative direct route to beta-alkylated primary alcohols which are prepared by aldol condensation of aldehydes followed by hydrogenation.     

Surface design for precise control of spatial growth of a mesostructured inorganic/organic film on a large-scale area

A microfabrication technique is presented to fabricate a mesostructured inorganic/organic composite film, i.e., silica/cetyltrimethylammonium chloride (CTAC) film, with near-perfect site-selectivity on a large surface area based on a spatially regulated growth method. To precisely regulate the site-selective growth of this mesocomposite film at the solid/liquid interface, we designed a novel microtemplate consisting of a "dual-component" self-assembled monolayer (SAM) with alternating hydrophobic trifluorocarbon (CF3) and cationic amino (NH2) groups. First, (heptadecafluoro-1,1,2,2-tetrahydrodecyl)trimethoxysilane (FAS)-SAM was formed onto Si substrate covered with native oxide (SiO2/Si) from vapor phase. The substrate was then photolithographically micropatterned using 172 nm vacuum UV light. Finally, the micropatterned FAS-SAM was immersed in a solution of 1 vol % (aminoethylaminomethyl)phenethyltrimethoxysilane (AEAMPS) in absolute toluene. Due to these treatments, a dual-SAM microtemplate with CF3- and NH2-terminated surfaces was fabricated, as evidenced by lateral force microscopy, ellipsometry, and X-ray photoelectron spectroscopy. Using this template, the microfabrication of a mesocomposite film was demonstrated. As a control, the micropatterned hydrophobic FAS-SAM template (composed of CF3- and OH-terminated surfaces) was also treated under the same conditions. Optical microscopy and atomic force microscopy confirmed that the formation of the continuous mesocomposite film proceeded only on the FAS-SAM-covered regions, while the AEAMPS-SAM-covered regions remained free of deposits. This shielding effect also remained constant regardless of the pattern's geometry, i.e., the interval distance between the FAS-SAM-covered areas in the pattern. Through this approach, we were able to obtain well-defined 5-, 10-, and 20-mum wide mesocomposite microlines over the entire 10 x 10 mm2 area with high area-selectivity. On the other hand, when the SiO2 regions were not terminated with the cationic NH2 groups, cluster formation proceeded not only on the hydrophobic CF3 regions but also on the SiO2 regions, particularly with an increase in the pattern interval distance, resulting in lower final pattern resolution.     

Three-dimensional porous coordination polymer functionalized with amide groups based on tridentate ligand: selective sorption and catalysis

To create a functionalized porous compound, amide group is used in porous framework to produce attractive interactions with guest molecules. To avoid hydrogen-bond formation between these amide groups our strategy was to build a three-dimensional (3D) coordination network using a tridentate amide ligand as the three-connector part. From Cd(NO3)2.4H2O and a three-connector ligand with amide groups a 3D porous coordination polymer (PCP) based on octahedral Cd(II) centers, {[Cd(4-btapa)2(NO3)2].6H2O.2DMF}n (1a), was obtained (4-btapa = 1,3,5-benzene tricarboxylic acid tris[N-(4-pyridyl)amide]). The amide groups, which act as guest interaction sites, occur on the surfaces of channels with dimensions of 4.7 x 7.3 A2. X-ray powder diffraction measurements showed that the desolvated compound (1b) selectively includes guests with a concurrent flexible structural (amorphous-to-crystalline) transformation. The highly ordered amide groups in the channels play an important role in the interaction with the guest molecules, which was confirmed by thermogravimetric analysis, adsorption/desorption measurements, and X-ray crystallography. We also performed a Knoevenagel condensation reaction catalyzed by 1a to demonstrate its selective heterogeneous base catalytic properties, which depend on the sizes of the reactants. The solid catalyst 1a maintains its crystalline framework after the reaction and is easily recycled.     

Anthracene array-type porous coordination polymer with host-guest charge transfer interactions in excited states

Confinement of electron donor guests affords an efficient, photo-induced charge transfer (CT) with the anthracene moieties of a porous coordination polymer.     

Total synthesis and biological evaluation of pacidamycin D and its 3'-hydroxy analogue

Full details of the total synthesis of pacidamycin D (4) and its 3'-hydroxy analogue 32 are described. The chemically labile Z-oxyacyl enamide moiety is the most challenging chemical structure found in uridylpeptide natural products. Key elements of our approach to the synthesis of 4 include the efficient and stereocontrolled construction of the Z-oxyvinyl halides 6 and 7 and their copper-catalyzed cross-coupling with the tetrapeptide carboxamide 5, a thermally unstable compound containing a number of potentially reactive functional groups. This synthetic route also allowed us to easily prepare 3'-hydroxy analogue 32. The assemblage by cross-coupling of the Z-oxyvinyl halide 6 and the carboxamide 5 at a late stage of the synthesis provided ready access to a range of uridylpeptide antibiotics and their analogues, despite their inherent labile nature with potential epimerization, simply by altering the tetrapeptide moiety.     

Mode change in the self-motion of a benzoquinone disk coupled with a NADPH system

The self-motion of a benzoquinone (BQ) disk on NADPH was investigated as the coupling of an autonomous motor and an enzyme reaction. In the absence of the enzyme reaction, features of motion changed depending on the concentration of NADPH, that is, continuous motion→ intermittent oscillatory motion→ no motion. When the reverse reaction from NADP(+) to NADPH was introduced into the system with the addition of an enzyme reaction, continuous motion changed to intermittent oscillatory motion with small amplitude. The mechanism of this mode change is discussed in relation to the surface tension as a driving force and the time course of UV spectra as a window to the progress of the reaction. Characteristic features of the mode change were qualitatively reproduced by a numerical calculation.