Effect of high magnetic field annealing on the microstructure and magnetic properties of Co-Fe layered double hydroxide

The effects of high magnetic field (10 T) on the products obtained by calcination of Co-Fe LDH precursors at different temperatures were investigated. The XRD results indicated that Fe^III substituted for Co^III in Co₃O₄ to yield Co^IICo^IIIFe^IIIO₄ under the calcination of Co-Fe LDH precursors at 400 °C. The products obtained by magnetic field annealing at 400 °C had a porous plate-like morphology, whereas the products without magnetic field annealing were composed of nanoparticles. It was seen that CoFe₂O₄ phase could be formed at low temperature (about 500 °C) under the magnetic field annealing. The grain size of products obtained by magnetic field annealing at 800 °C was larger than that of zero magnetic field. It was found that the saturation magnetization was significantly enhanced after magnetic field annealing, especially at lower temperature (≤600 °C). The possible reason for the effects on the microstructure and magnetic properties of products obtained by magnetic field annealing was discussed.     

Jet ejection from droplets near the Leidenfrost temperature

Abstract  

Droplets impinging on a hot surface that is near the Leidenfrost temperature were experimentally investigated. Ejection of jets from the top of the droplet was observed during the transient interaction between the droplet and a hot wall. We term this phenomenon jet ejection from droplets. When the bottom of the droplet initially impacts the hot surface, a jet is to be ejected from the top of the droplet. The jet ejection occurred only at low impact velocities and around the wetting limit temperature. It was not observed when droplets were dropped from large heights or when the surface was at a high temperature.     

Visualization of Magnetization Transfer Effect in Polyethylene Glycol Impregnated Waterlogged Wood

To visualize the condition of impregnation of polyethylene glycol (PEG) in waterlogged wood, we demonstrated magnetic transfer (MT) magnetic resonance imaging (MRI) through a series of process of PEG impregnation. Three different samples were examined; reference wood, 10 cm cut wood, and 5 cm cut wood. During this study, the upper section sample was kept immersed in water, for the middle and lower sections the concentration of PEG solution was changed at 20 wt% intervals from 20 to 100 wt%. The impregnated periods of each PEG solution concentration were 14 days. Then, MR imaging were performed with/without MT pulse. The MTR value for both 10 cm- and 5 cm-samples were shown to decrease at 20 wt% PEG at peak concentration. When the sample volume was large, e.g., 10 cm-sample, the MTR value decreased to 100 wt% PEG concentration. In contrast, when a sample volume was small, e.g., 5 cm-sample, MTR value decreased to 60 wt% PEG concentration. In conclusion, MTR analysis makes it possible to nondestructively visualize and evaluate the inner condition concerning the PEG impregnation method for waterlogged wood.     

Group-velocity-matched cascaded quadratic nonlinearities of femtosecond pulses in periodically poled MgO:LiNbO3

Large nonlinear phase shifts were generated with femtosecond pulses at 1560 nm through cascaded quadratic interactions in periodically poled MgO-doped LiNbO3. The off-diagonal component of the nonlinear coefficient was utilized for simultaneous quasi phase matching and group-velocity matching. The effective nonlinear refractive index was varied from -2.9 x 10(-14) to +3.3 x 10(-14) cm2/W by tuning the phase-mismatch conditions.     

Estimation of Color-Difference Formulae at Color Discrimination Threshold Using CRT-Generated Stimuli

The advanced color-difference formulae, CMC, CIE94, and the recently proposed CIEDE2000 formula, together with the basic CIELAB system, were estimated using the chromaticity discrimination threshold data at CIE Gray and Blue color centers. Gray is the most basic color and blue is, perceptually, in the most different region from other areas across the color space. The test stimuli, evenly distributed in the (a#x2217;, b#x2217;)-, (a#x2217;, L#x2217;)-, and (b#x2217;, L#x2217;)-plane of the CIELAB space, were generated on a CRT display, driven by a VSG system. Each direction from each color center was assessed 3 times by a panel of 9 normal color-vision observers with the psychophysical method of interleaved staircase. The experimental data were reliable and consistent with other studies according to the observer accuracy and fitted ellipse parameters. A comprehensive analysis shows the color discrimination tolerances could be well fitted by ellipses, and the CIEDE2000 and CIELAB formulae performed better than CIE94 while the CMC worst at the threshold level for the color centers studied.     

Enantioresolution of 2-methoxy-2-(1-naphtyl)propionic acid using diastereomeric salt formation with chiral phenylethylamine

An enantioresolution of 2-methoxy-2-(1-naphtyl)propionic acid (MαNP acid) using the diastereomeric salt with chiral (R)-phenylethylamine was achieved to give enantiopure (R)-MαNP acid in 29% yield with >99% ee based on rac-MαNP acid. X-ray crystallographic analysis of diastereomeric salt revealed that (R)-MαNP acid was tightly arranged by four independent hydrogen bonds and one CH–π interaction with (R)-phenylethylamine.     

Radical reaction of chlorophyll derivatives triggered by AIBN

Radical reactions of a C3-vinylated chlorophyll derivative, methyl pyropheophorbide-a, which were induced by thiols and the conventional initiator azobisisobutyronitrile (AIBN) were examined in vitro for the first time. Thiyl radicals attacked regioselectively at the sole C3-vinyl group, and the anti-Markovnikov sulfanyl adducts were obtained as major products. The other peripheral substituents, as well as the chlorin macrocycle, remained intact. The AIBN-induced radical reaction competed with co-oxidation that afforded the C3-formyl chlorin. This method can open new routes to derivatization of vinyl chlorins.     

Operating Limits for Stable Growth of Silicon Fibers with Diameter Less Than 150 μm by Modified μ-PD Method

The μ-PD method originally developed for oxide crystals has been modified and applied for filamentary silicon crystal growth. Our main modification of μ-PD method is concerned with an arrangement of melt permeable feeder which is inserted into the nozzle. The feeder finishes by a sharp tip the diameter of which (is almost the same as that of the desired semiconductor fiber, i.e., less than 150 μm. Silicon fibers were grown from the small liquid pool at the end of the feeder. Three types of crucible-die arrangement were designed and tested. The best results were obtained with the help of inclined insert made of graphite fibers because of its ability to quench oscillations and longer operation life. Fiber crystals, 100 μm in diameter and 70 mm in length, have been grown successfully. Small meniscus stability, operating limits of μ-PD method and silicon carbide formation during the growth process are discussed.     

NMR studies on the ligand exchange reactions between diaryl tellurides and phenyllithium: Detection of hypervalent triaryl tellurium ate complexes

Diaryl tellurides undergo rapid ligand exchange and disproportionation reactions on treatment with phenyllithium at −78°C. Triarylteliuranes [10-Te-3(C₃)]⁻ Li⁺ were identified as discrete intermediates during the reactions by ¹²⁵Te, ¹H, ¹³C, and CH-COSY NMR studies.