Influences of fatty acid moiety and esterification of polyglycerol fatty acid esters on the crystallization of palm mid fraction in oil-in-water emulsion

We examined the crystallization of palm mid fraction (PMF) in oil-in-water (O/W) emulsion, after adding polyglycerol fatty acid esters (PGFEs). We employed ultrasonic velocity measurements and DSC techniques, with special emphases on the influences of fatty acid moiety and esterification of PGFE. Twelve types of PGFEs were examined as additives. PGFEs have a large hydrophilic moiety composed of 10 glycerol molecules to which palmitic, stearic and behenic acids were esterified as the fatty acid moiety with different degrees of esterification. Crystallization temperature (T(c)) of PMF remarkably increased with increasing concentrations of the PGFEs as the chain length of the fatty acid moiety increased, and the PGFE became more hydrophobic in accordance with increasing degree of esterification. We observed that the heterogeneous nucleation of PMF in the O/W emulsion was activated at the oil-water interface, where the template effect of very hydrophobic long saturated fatty acid chains of the PGFE might play the main role of heterogeneous nucleation.     

Role of the special pair in the charge-separating event in photosynthesis

We synthesized special-pair/electron-acceptor systems consisting of a complementary slipped cofacial dimer of imidazolyl-substituted zinc porphyrin, bearing pyromellitdiimide as the electron acceptor. In the case of the dimer, the first and second oxidation potentials were split into a total of four peaks in the differential pulse voltammetry measurement. Furthermore, the shift values of the first oxidation potentials obtained by changing the solvent polarity for the dimer were almost half of those observed for the monomer. These results indicate that the radical cation is delocalized over the whole pi system of the dimer. Time-resolved transient absorption measurements revealed that, relative to the corresponding monomer, the dimer accelerated the charge separation rate, but decelerated the charge recombination rate. The smaller reorganization energy of the slipped cofacial dimer relative to that of the monomeric system demonstrates the significance of the special-pair arrangement for efficient charge separation in photosynthesis.     

Improvement of culture conditions forl-proline production by a recombinant strain ofSerratia marcescens

Serratia marcescens SP511 was previously reported to be anl-proline-producing strain that harbors a recombinant plasmid carrying the mutant type of the proline operon. This strain produced 65 g/L ofl-proline in a medium containing 22% sucrose and urea after 5 d of incubation under the conventional culture conditions. We searched for more suitable culture conditions for more abundantl-proline production by SP511. To improve the supply of a nitrogen source to cells, ammonium was used instead of urea and fed to a culture under control of the pH of the medium. The concentrations of MgSO₄ and K₂HPO₄ were increased, and in addition, sucrose was continuously added to the culture at a final concentration of 32%. Under these conditions, the cell amount was increased twofold over that under the previous conditions andl-proline production reached a maximum of more than 100 g/L after 4 d of incubation.     

Synthesis of 12-deoxyroyleanone, cryptoquinone, 11,14-dihydroxy-8,11,13-abietatrien-7-one, and related derivatives from dehydroabietic acid

Naturally occurring abietane quinones and hydroquinone, namely, 12-deoxyroyleanone (1a), cryptoquinone (4a), and 11,14-dihydroxyabieta-8,11,13-trien-7-one (5a), together with the epimers of tryptoquinones D (2) and F (3), were first synthesized from dehydroabietic acid (6).     

Molecular recognition of l-leucyl-l-alanine: enantioselective inclusion of alkyl methyl sulfoxides

A simple aliphatic dipeptide, l-leucyl-l-alanine (Leu-Ala), includes several alkyl methyl sulfoxides enantioselectively to form inclusion crystals. From single-crystal X-ray analyses of three inclusion compounds of dimethyl sulfoxide (DMSO), isobutyl methyl sulfoxide, and benzyl methyl sulfoxide, it was elucidated that Leu-Ala molecules self-assemble to form layer structures and the sulfoxides are included via hydrogen bonding in a cavity between these layers. The inclusion cavity has methyl group and isobutyl group at its each side, and the guest sulfoxide is placed in such a manner that its methyl group faces toward the methyl of the Leu-Ala cavity. When the alkyl group of the sulfoxide is comparably large, it is located in the residual space of the cavity to attain effective crystal packing. Thus, the sulfoxides having a comparably large group such as isobutyl, butyl, and benzyl are included with a high (R)-enantioselectivity in Leu-Ala crystals.     

A new finding in selective Baeyer-Villiger oxidation of α-fluorinated ketones; a new and practical route for the synthesis of α-fluorinated esters

α-Fluorinated esters were effectively prepared by the Baeyer-Villiger oxidation of α-fluorinated ketones with m-chloroperbenzoic acid (m-CPBA) under mild conditions. The yield of the esters was influenced by the choice of solvent, base, and substituent on the aryl group of the ketones. 4-Methoxyphenyl substituted fluoroketones were oxidized almost quantitatively with m-CPBA within 10 min to 12 h at room temperature using 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP) as a cosolvent with CH₂Cl₂ (1:1, v/v) and aqueous buffer (KH₂PO₄-NaOH, pH 7.6) as an additive base. The oxidation reaction rates of α-fluorinated ketones were higher than those of the corresponding non-fluorinated ketones. The fluorine atom at α-position of fluoromethyl aryl ketones enhanced the reactivity in the Baeyer-Villiger oxidation.     

Non-C2-symmetrical antimony-phosphorus ligand, (R/S)-2-diphenylphosphano-2′-di(p-tolyl)stibano-1,1′-binaphthyl (BINAPSb): preparation and its use for asymmetric reactions as a chiral auxiliary

A new non-C₂-symmetrical antimony-phosphorous ligand, (±)-2-diphenyl-phosphano-2′-di(p-tolyl)stibano-1,1′-binaphthyl (BINAPSb) 3, has been prepared from 2-bromo-2′-diphenylphosphano-1,1′-naphthyl 4 via its borane complex 6, and could be resolved by the separation of a mixture of the diastereomeric palladium complexes 8A and 8B derived from the reaction of (±)-3 with optically active palladium reagent (S)-7. The enantiomerically pure BINAPSb 3 has proved to be highly effective in the palladium-catalyzed asymmetric hydrosilylation of styrene as a chiral auxiliary.     

Profiling analysis of oligosaccharides in antibody pharmaceuticals by capillary electrophoresis

Carbohydrate chains in glycoprotein pharmaceuticals have important roles for the expression of their biological activities. Therefore, development of an assessment method for the carbohydrate chains is an important parameter for quality control of glycoprotein pharmaceuticals such as newly developed therapeutic antibodies. In this report, we applied capillary electrophoresis with laser-induced fluorescence detection to the analysis of carbohydrate chains after releasing with glycoamidase followed by derivatization with 3-aminobenzoic acid. We found that four major oligosaccharides present in antibody pharmaceuticals were successfully separated with good resolution. The present method showed good precision in both migration times and relative peak areas, and gave comparable accuracy with that using a derivatization method with 8-aminopyrene-1,3,6-trisulfonate.     

Characterization of fibril reinforced membranes for fuel cells

Characteristics of fibril reinforced membranes developed by Asahi Glass Company are reviewed. PTFE-fibrils <1 μm in diameter are dispersed in ion-exchange membranes uniformly. Mechanical properties, such as tensile strength, tear strength, creep property and compressive property were examined and compared with non-reinforced membranes. Fibril reinforced membranes, even by the addition of a small amount of PTFE-fibrils (2.7 wt.%), show excellent mechanical strength, especially in creep and tear strength. Cell performance is nearly equal to the one using a non-reinforced membrane and cell voltage stays about the same during the cell operation at 80 °C for 3000 h.     

Novel approach to the zaragozic acids. Enantioselective total synthesis of 6,7-dideoxysqualestatin H5

The total synthesis of 6,7-dideoxysqualestatin H5 (3) has been completed by a concise approach that features the stereoselective intramolecular vinylogous aldol reaction of the furoic ester 25a to give 30 or its trimethylsilyl ether derivative 34, which possess the requisite absolute stereochemistry at C(3)-C(5) of 3. Compound 34 was reduced to the saturated bislactone 39, and the C(1) side chain subunit 47 was introduced leading to a mixture of the hemiacetals 48 and the corresponding ketone 49. When this mixture was stirred with methanolic acid, transketalization occurred to give a mixture of 50 and the spirocyclic methyl acetals 51a,b. Oxidation of the primary alcohol group in 50 followed by saponification of the two remaining ester groups gave 3. The longest linear sequence in the synthesis commences with commercially available erythronolactone (26) and requires 17 chemical steps with only 10 isolated intermediates.