Development of a certified reference material for the determination of perfluorooctanoic acid

A certified reference material (CRM) for the determination of perfluorooctanoic acid (PFOA) has been issued as NMIJ CRM 4056-a by the National Metrology Institute of Japan, National Institute of Advanced Industrial Science and Technology (NMIJ/AIST). Purity (kg kg^?1) based on a titration method was determined by subtracting the mass fractions of impurities measured using liquid chromatography/mass spectrometry (LC/MS) from those of acids expressed as PFOA measured by a neutralization potentiometric titration. To validate an obtained result, purity based on a mass balance method was determined by subtracting the mass fractions of impurities, measured using LC/MS, Karl-Fischer titration (KFT), and vacuum evaporation, from 1 kg kg^?1. Results from both titration and mass balance methods were in agreement within the accepted limits of uncertainty. The certified purity of NMIJ CRM 4056-a was determined to be 0.959 kg kg^?1, calculated as the mean of the results obtained with the two methods. The standard uncertainty of the certified purity was evaluated from purity evaluations as well as from sample homogeneity and stability obtained from LC/MS and KFT analyses. Consequently, the expanded uncertainty was estimated to be 0.005 kg kg^?1 with a coverage factor of k = 2.     

Supramolecular polymer gels from polystyrene bearing cyclic amidine Group and acrylic acid/n‐butyl acrylate copolymers

We have prepared supramolecular polymer gels by mixing solutions of a polystyrene bearing cyclic amidine pendant groups (Poly‐A) and copolymers of acrylic acid and n‐butyl acrylate (Poly‐C), followed by evaporation. FT‐IR analysis indicated that the gels were formed through three‐dimensional network of the amidinium‐carboxylate salt bridge. DSC study showed that the Poly‐A and the Poly‐C were miscible when the salt bridge content was high. On the other hand, the mixtures with small salt bridge content showed phase separation. Dynamic shear measurements showed that the gel prepared from Poly‐A and Poly‐C with acrylic acid unit content of 15% had G' higher than G″ over a temperature range of ?22 °C to 32 °C, in which the G' value reached almost 1 MPa. The gel had a crossover point of G' and G″ at 32 °C, very close to room temperature, which suggested facile processability. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 765–770     

Spectroscopic and crystallographic studies on the stability of self-assembled coordination nanotubes

On complexation with (en)Pd(NO3)2, tetrakis(3,5-pyridine) ligand gives two isomeric coordination nanotubes, which are in slow equilibrium despite the presence of sixteen Pd-N bonds in the tube framework.     

Optical probing of spin polarization of electrons in quantum dot edge channels

We propose an optical method for the investigation of the quantum dot edge channels by utilizing circularly polarized photoluminescence in the integer-quantum-Hall-effect regime. One of the advantages of our method is that the degree of the spin-polarization of the electrons in the inner- and outer-compressible liquids can be probed separately. The observed polarized photoluminescence spectra can be explained by the calculated electron spin-dependent optical transition probabilities based on the local-spin density approximation.     

Lipase TL-mediated kinetic tesolution of 5-benzyloxy-1-tert-butyldimethylsilyloxy-2-pentanol at low temperature: concise asymmetric synthesis of both enantiomers of a piperazic acid derivative

Lipase TL-mediated kinetic resolution of (+/-)-5-benzyloxy-1-tert-butyldimethylsilyloxy-2-pentanol (5) at low temperature proceeded to give the corresponding (S)-alcohol 5 and (R)-acetate 6 in quantitative yields with high enantiomeric purity. The addition of bases such as pyridine, DMAP, 2,4- and 2,6-lutidines, or triethylamine considerably enhanced the rate of kinetic resolution. The alcohol (S)-5 and the acetate (R)-6 were converted to piperazic acid derivatives (R)- and (S)-3, respectively, via the intramolecular Mitsunobu reaction as a key step.     

Mechanistic study on dimerization of acetylene with a Nieuwland catalyst

A mechanistic study on the Nieuwland catalysis for dimerization of acetylene is performed by detecting copper–acetylene and copper–monovinylacetylene π‐complexes and also by examining the kinetics under virtually the same reaction conditions employed in the industrial process. An efficient H/D exchange occurs between acetylene and protons in the Nieuwland catalytic system. Addition of a coordinating ligand to the conventional Nieuwland catalytic system results in improvement of the catalytic activity and selectivity for the acetylene dimerization. The kinetic analysis including the kinetic deuterium isotope effect provides valuable insight into the Nieuwland catalytic mechanism of the dimerization of acetylene. Copyright © 2008 John Wiley & Sons, Ltd.     

Characterization of certified reference material for quantification of polychlorinated biphenyls and organochlorine pesticides in fish

Fish certified reference material (CRM), NMIJ CRM 7404-a, for the analysis of polychlorinated biphenyls (PCBs) and organochlorine pesticides (OCPs) was developed by the National Metrology Institute of Japan, part of the National Institute of Advanced Industrial Science and Technology. Fish samples (Japanese seabass) used for the preparation of the CRM were collected from Tokyo Bay, and the edible part was freeze-dried, pulverized, sieved, homogenized, and sterilized by γ-irradiation. This sample is in the form of a powder comprising approximately 10 g stored in a brown glass bottle. The certification was carried out using multiple analytical methods such as pressurized liquid extraction, Soxhlet extraction, saponification, and homogenization to ensure the reliability of analytical results; the certified values of target PCBs (PCB 28, PCB 70, PCB 105, PCB 153, and PCB 170) and OCPs (trans-nonachlor, dieldrin, p,p′-DDE, p,p′-DDT, and p,p′-DDD) were 1.05–14.0 μg kg⁻¹ and 1.57–18.0 μg kg⁻¹ for PCBs and OCPs, respectively. This is the first fish powder CRM in which PCBs and OCPs were determined by isotope dilution mass spectrometry.     

Laser-induced fluorescence and infrared spectroscopic studies on the specific solvation of tris(1-(2-thienyl)-4,4,4-trifluoro-1,3-butanedionato)europium(III) in an ionic liquid

The extraction constant and the two-phase stability constant (K_D,Mβ₃) of tris(2-thenoyltrifluoroacetonato)europium(III) between 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ([C₄mim][Tf₂N]) as an ionic liquid and an aqueous phase were determined by considering the extraction equilibria including anionic tetrakis(2-thenoyltrifluoroacetonato)europate(III). Specific solute-solvent interactions between the neutral Eu(III) chelate and [C₄mim][Tf₂N] molecules were revealed from the relationships between the distribution constant of the enol form of 2-thenoyltrifluoroacetone (Htta) as a proton chelate and the distribution constant (K_D,M) of the neutral Eu(III) chelate because the [C₄mim][Tf₂N] system gave the high K_D,Mβ₃ value compared with those in conventional molecular solvents such as benzene and 1,2-dichloroethane. The coordination environment of Eu³⁺ in the neutral Eu(III) chelate in [C₄mim][Tf₂N] was investigated by time-resolved laser-induced fluorescence spectroscopy and infrared absorption spectroscopy. Both methods consistently indicated that not only the Eu(III) chelate extracted but also Eu(tta)₃(H₂O)₃ synthesized as a solid crystal were almost completely dehydrated in [C₄mim][Tf₂N] saturated with water. Consequently, the higher K_D,M or extractability of the neutral Eu(III) chelate in the [C₄mim][Tf₂N] system can be ascribed to the dehydration of the Eu(III) chelate, which is caused by the specific solvation with [C₄mim][Tf₂N] molecules.     

Toward the racemic total synthesis of hederacines A and B: construction of an advanced tricyclic intermediate

Progress toward the total synthesis of hederacines A and B is described. Our approach involves an allylic cyanate-to-isocyanate rearrangement, eneyne ring-closing metathesis, and a transannular reaction between the C-5 amino group and the C-12 position of the perhydroazuleno[5,6-b]furanone intermediate.     

Fibrin glue increases the cell survival and the transduced gene product secretion of the ceiling culture-derived adipocytes transplanted in mice

The development of clinically applicable scaffolds is important for the application of cell transplantation in various human diseases. The aims of this study are to evaluate fibrin glue in a novel protein replacement therapy using proliferative adipocytes and to develop a mouse model system to monitor the delivery of the transgene product into the blood and the fate of the transduced cells after transplantation. Proliferative adipocytes from mouse adipose tissue were transduced by a retroviral vector harboring the human lecithin-cholesterol acyltransferase (lcat) gene, and were subcutaneously transplanted into mice combined with fibrin glue. The lcat gene transduction efficiency and the subsequent secretion of the product in mouse adipocytes were enhanced using a protamine concentration of 500 μg/ml. Adipogenesis induction did not significantly affect the lcat gene-transduced cell survival after transplantation. Immunohistochemistry showed the ectopic enzyme production to persist for 28 days in the subcutaneously transplanted gene- transduced adipocytes. The increased viability of transplanted cells with fibrin glue was accompanied with the decrease in apoptotic cell death. The immunodetectable serum LCAT levels in mice implanted with the fibrin glue were comparable with those observed in mice implanted with Matrigel, indicating that the transplanted lcat gene-transduced adipocytes survived and functioned in the transplanted spaces with fibrin glue as well as with Matrigel for 28 days. Thus, this in vivo system using fibrin is expected to serve as a good model to further improve the transplanted cell/scaffold conditions for the stable and durable cell-based replacement of defective proteins in patients with LCAT deficiency.