Palladium-catalysed regioselective addition reaction of ethyl phenylphosphinate with terminal acetylenes: ligand- and solvent-dependent regioselectivity

Palladium-1,2-bis(diphenylphosphino)ethane complex catalyses regioselective Markovnikov addition of ethyl phenylphosphinate to terminal alkynes in toluene, while the use of tri-tert-butylphosphine as the ligand or ethanol as the solvent leads to regioselectivity reversal.     

Instability of confined thin liquid film trilayers

The instability of a system in which three stratified thin liquid films are confined in a channel with parallel walls and the interior film is subject to van der Waals-driven breakup is examined in this work. We derive a model based on lubrication theory and consisting of a pair of nonlinear partial differential equations describing the position of the two liquid interfaces. A linear stability analysis is carried out to show that the effects of varying the boundary film thicknesses can be understood in terms of several known limits, including a supported monolayer, confined bilayer, and supported bilayer. Variation of the boundary film viscosities is shown in many cases to eliminate the supported-bilayer limit. The parameter regimes in which squeezing and bending modes dominate the initial growth are determined, and nonlinear simulations are used to show that the mode always switches to squeezing near rupture. It is also found that a multi-modal dispersion relation may be created by asymmetries in thickness ratio, but not viscosity ratio, even in the absence of asymmetric interfacial tensions. The results of this study are expected to be relevant to multiphase microfluidic systems and the lithographic printing process.     

Structure elucidation of thermal degradation products of amlodipine

Thermal degradation of amlodipine base causes intramolecular reactions affording three cyclic products, referred to as AMLDEG-I, AMLDEG-II, and AMLDEG-III, respectively. AMLDEG-I is a cyclized product formed by intramolecular elimination of ammonia from amlodipine. AMLDEG-II is a positional isomer of AMLDEG-I. AMLDEG-III is also intramolecular cyclisation product. The three degradation products were isolated by column chromatography and characterized by FT-IR and 1H and 13C NMR spectroscopy data. The AMLDEG-III was crystallized and its structure was solved by single crystal X-ray diffraction (SXRD).     

Kinetics and mechanism of the oxidation of lower oxyacids of phosphorus by hexamethylenetetramine bromine

The oxidation of lower oxyacids of phosphorus by hexamethylenetetramine bromine (HABR) in glacial acetic acid resulted in the formation of corresponding oxyacids with phosphorus in a higher oxidation state. The reaction exhibited 2:1 stoichiometry. The reaction is first order with respect to HABR. Michaelis–Menten‐type kinetics were observed with respect to the acids. The formation constant of the phenylphosphinic acid–HABR complex also has been determined spectrophotometrically. The thermodynamic parameters for the complex formation and the activation parameters for their decomposition were calculated. The reaction showed the presence of a substantial kinetic isotope effect. It is proposed that the HABR itself is the reactive oxidizing species. It has been shown that the pentacoordinated tautomer of the phosphorus oxyacid is the reactive reductant. A suitable mechanism has been proposed. © 2000 John Wiley & Sons, Inc. Int J Chem Kinet 32: 165–170, 2000     

Synthesis and characterization of poly(benzobisthiazole) with tetramethylbiphenyl moiety in the main chain

Poly(benzobisthiazole)s containing an ortho-tetramethyl substituted biphenyl moiety were synthesized via the polycondensation of 2,5-diamino-1,4-benzenedithiol dihydrochloride with 2,2′,6,6′-tetramethylbiphenyl-4,4′-dicarboxylic acid in poly(phosphoric acid) (PPA). The intrinsic viscosities of the tetramethylbiphenyl poly-(benzobisthiazole)s in chlorosulfonic acid at 30°C were in the range of 6.9–13.4 dL/g. Copolycondensation of 2,5-diamino-1,4-benzenedithiol dihydrochloride with terephthalic acid and 2,2′,6,6′-tetramethylbiphenyl-4,4′-dicarboxylic acid was carried out as well by varying the ratio of the two dicarboxylic acid monomers in the reactant mixture. The homopolymers and copolymers were characterized by Fourier transform infrared spectroscopy (FTIR) and ¹³C solid-state nuclear magnetic resonance spectroscopy (NMR). Thermal stability of the polymers was evaluated by thermogravimetric analysis (TGA) and thermogravimetric mass spectrum analysis (TG-MS). The tetramethylbiphenyl poly(benzobisthiazole)s were found to be more stable at elevated temperatures than the parent poly(p-phenylene benzobisthiazole) (PBZT). © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1407–1416, 1998     

Thermoelectric properties of Fe-substituted layered compound,LiCo<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>Fe<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>O<Subscript>2</Subscript>

The layered compound LiCoO₂ belonging to the ABO₂ class exhibits a variety of interesting behaviors, and substitution adds a twist to the properties. Hence, the effect of partial substitution of Co⁺³ with Fe⁺³ on the high-temperature thermoelectric properties has been studied in detail. The X-ray diffraction patterns together with Rietveld refinement indicate formation of a single phase conforming to R\( \overset{-}{3} \)m space group in all the three cases, LiCo_1?x Fe _x O₂ with x = 0.01, 0.02, and 0.08. The electrical resistivity in all the compounds decreases by four orders of magnitude with increasing temperature from 300 to 1000 K, a semiconducting behavior. The Seebeck coefficient is found to be very high, >700 μV K^?1 in all the cases, and increases with increasing temperature and Fe⁺³ substitution. The thermal conductivity, on the other hand, has been found to decrease with temperature in all the compounds from 3.5 W m^?1 K^?1 at room temperature to 1 W m^?1 K^?1 at 973 K, a consequence of phonon-phonon scattering. High resistivity of the compounds limits power factor indicating that carrier concentration and mobility need to be increased to realize a high figure-of-merit.     

Substituent Effect on Absorption and Fluorescence Properties of Thieno[3, 2-<Emphasis Type="Italic">c</Emphasis>]Pyridine Derivatives

New substituted thieno[3,2-c]pyridine derivatives 5 were synthesized by the reaction of 3-bromo-4-chlorothieno[3,2-c]pyridine 1 with cyclic amine 2, which further on Suzuki reaction with boronic acids 4 converted to corresponding 3-arylthieno[3,2-c]pyridine 5. Substituent R³ has predominant effect on fluorescence properties of thienopyridines. However, the electron donor amine at C₄ has no effect on fluorescence properties of thienopyridines.

Open image in new window

Graphical Abstract New thieno[3,2-c]pyridine derivatives were synthesized from 3-bromo-4-chlorothieno[3,2-c]pyridine and cyclic amines, which by on Suzuki reaction with boronic acids converted to corresponding 3-arylthieno[3,2-c]pyridine. Substituent R3 has predominant effect on fluorescence properties of thienopyridines. However, the electron donor amine at C4 has no effect on fluorescence properties of thienopyridines

     

A Stability-Indicating LC Method for Analysis of Balsalazide Disodium in the Bulk Drug and in Pharmaceutical Dosage Forms

A novel, sensitive, stability-indicating gradient RP-LC method has been developed for quantitative analysis of balsalazide disodium and its related impurities both in the bulk drug and in pharmaceutical dosage forms. Efficient chromatographic separation was achieved on a C₁₈ stationary phase with a simple mobile-phase gradient prepared from methanol and phosphate buffer (10 mm potassium dihydrogen orthophosphate monohydrate, adjusted to pH 2.5 by addition of orthophosphoric acid). The mobile-phase flow rate was 1.0 mL min^?1. Quantification was achieved by use of ultraviolet detection at 240 nm. Under these conditions resolution of balsalazide disodium from its three potential impurities was greater than 2.0. Regression analysis resulted in a correlation coefficient greater than 0.99 for balsalazide disodium and all three impurities. This method was capable of detecting the three impurities at 0.003% of the test concentration of 0.3 mg mL^?1, using an injection volume of 10 μL. Inter-day and intra-day precision for all three impurities and for balsalazide disodium was within 2.0% RSD. Recovery of balsalazide disodium from the bulk drug (99.2–101.5%) and from pharmaceutical dosage forms (99.8–101.3%), and recovery of the three impurities (99.1–102.1%) was consistently good. The test solution was found to be stable in 70:30 (v/v) methanol–water for 48 h. When the drug was subjected to hydrolytic, oxidative, photolytic, and thermal stress, acidic and alkaline hydrolysis and oxidizing conditions led to substantial degradation. The RP-LC method was validated for linearity, accuracy, precision, and robustness.     

Stress Degradation Behavior of Entacapone and Development of LC Stability-Indicating Related Substances and Assay Method

A new, sensitive, stability indicating gradient RP-LC related substances and assay method has been developed for the quantitative determination of entacapone in bulk drugs. Efficient chromatographic separation was achieved on a C18 stationary phase with simple mobile phase combination of buffer and acetonitrile. Buffer consisted of 0.1% orthophosphoric acid, delivered in a gradient mode and quantitation was carried out using ultraviolet detection at 220 nm with a flow rate of 1.5 mL min^?1. In the developed LC method the resolution (R _s ) between entacapone and its three potential process impurities were found to be >2.0. Regression analysis showed an r ² value (correlation coefficient) >0.99 for entacapone and its three potential impurities. This method was capable to detect all three process impurities of entacapone at a level of 0.003% with respect to test concentration of 0.5 mg mL^?1 for a 20 μL injection volume. The inter- and intra-day precision values for all three impurities and for entacapone was found to be within 2.0% RSD. The method has shown good and consistent recoveries for entacapone in bulk drugs (99.2–101.5%) and its three impurities (99.5–102.2%). The test solution was found to be stable in diluent for 48 h. The drug substances were subjected to stress conditions of hydrolysis, oxidation, photolysis and thermal degradation. Considerable degradation was found to occur in acid stress, base stress and oxidative conditions. The stressed test solutions were assayed against the qualified working standard of entacapone and the mass balance in each case was close to 99.7% indicating that the developed method was stability-indicating. The developed RP-LC method was validated with respect to linearity, accuracy, precision and robustness.     

Reduced order fully coupled structural–acoustic analysis via implicit moment matching

A reduced order model is developed for low frequency, undamped, fully coupled structural–acoustic analysis of interior cavities backed by flexible structural systems. The reduced order model is obtained by applying a projection of the coupled system matrices, from a higher dimensional to a lower dimensional subspace, whilst preserving essential properties of the coupled system. The basis vectors for projection are computed efficiently using the Arnoldi algorithm, which generates an orthogonal basis for the Krylov Subspace containing moments of the original system. The key idea of constructing a reduced order model via Krylov Subspaces is to remove the uncontrollable, unobservable and weakly controllable, observable parts without affecting the transfer function of the coupled system. Three computational test cases are analyzed, and the computational gains and the accuracy compared with the direct inversion method in ANSYS.