Structural and morphological investigation of ceria-promoted Al(2)O(3) under severe reducing/oxidizing conditions

A series of CeO(2)/Al(2)O(3) samples with different ceria loadings in the range 0-25 wt % (0, 2, 5, 7.5, 15, and 25%) were prepared by incipient wetness and studied using several complementary techniques such as Brunauer-Emmett-Teller (BET), X-ray diffraction (XRD), temperature-programmed reduction (TPR), Raman, high-resolution transmission electron microscopy (HRTEM), and extended X-ray absorption fine structure (EXAFS). The aim of the investigation was to understand the behavior of ceria when deposited on alumina and treated under oxidizing and reducing conditions at high temperature (T >/= 1273 K). It is shown that ceria can partially stabilize alumina toward the formation of low-surface-area phases up to 1373 K under oxidizing conditions, while enhanced stabilization is observed under reducing conditions, being effective up to 1473 K. A detailed quantitative temperature-programmed reduction (TPR) analysis made at different loadings and calcination temperatures allowed us to identify three characteristic regions where the reduction of small and large ceria crystallites occurs with the formation of CeAlO(3) crystallites at high temperature. These are likely responsible for surface-area stabilization. For dispersed ceria samples, reduction takes place almost exclusively at low temperature (<700 K), while a shift to higher temperatures is observed upon increasing the ceria particle size. A fraction of Ce, in samples at low loadings, is stable in the lower oxidation state, even if subjected to strongly oxidizing conditions.     

Magnetic interactions of iron nanoparticles in arrays and dilute dispersions

The magnetic properties of monodisperse Fe nanoparticles with over 4 orders of magnitude difference in concentration are studied by a combination of ordinary and remanent hysteresis loops, zero field cooled magnetization as a function of temperature, and magnetic relaxation rates. We compare the behavior of dilute dispersions with different concentrations, dispersions, and arrays made from the same particles, and nanoparticle arrays with different particle sizes and separations. The results are related to theoretical predictions and are used to create a unified picture of magnetostatic interactions within the assemblies.     

An adiabatic linearized path integral approach for quantum time correlation functions: electronic transport in metal-molten salt solutions

We generalize the linearized path integral approach to evaluate quantum time correlation functions for systems best described by a set of nuclear and electronic degrees of freedom, restricting ourselves to the adiabatic approximation. If the operators in the correlation function are nondiagonal in the electronic states, then this adiabatic linearized path integral approximation for the thermal averaged quantum dynamics presents interesting and distinctive features, which we derive and explore in this paper. The capability of these approximations to accurately reproduce the behavior of physical systems is demonstrated by calculating the diffusion constant for an excess electron in a metal-molten salt solution.     

New chromogenic probes into nanoscopic pockets in enhanced sensing protocols for amines in aqueous environments

[structure: see text] A new sensory MCM-41-based material for the colorimetric sensing and discrimination of amines has been developed.     

Intra-operative acoustic hemostasis of liver: production of a homogenate for effective treatment

Objective: We have shown that High-Intensity Focused Ultrasound (HIFU) can effectively control bleeding from injuries to solid organs such as liver, spleen, and lung. Achievement of hemostasis was augmented when a homogenate of tissue and blood was formed. The objective of this study was to investigate quantitatively the effect of homogenate production on HIFU application time for hemostasis. Possible mechanisms involved in homogenate production were also studied.Methods: Ten anesthetized rabbits had laparotomy and liver exposure. Liver incisions, 15-25 mm long and 3-4 mm deep, were made followed immediately by HIFU application. Two electrical powers of 80 and 100 W corresponding to focal acoustic intensities of 2264 and 2829 W/cm², respectively were used. Tissue and homogenate temperatures were measured. Smear and histological tissue sample analysis using light microscopy were performed.Results: In treatments with homogenate formation, hemostasis was achieved in 76 ± 1.3 s (Mean ± Standard Error Mean: SEM) at 80 W. In treatments without homogenate formation (at 80 W), hemostasis was achieved in 106 ± 0.87 s. At 100 W, hemostasis was achieved in 46 ± 0.3 s. The time required for homogenate formation, at 80 and 100 W were 60 ± 2.5 and 23 ± 0.3 s, respectively. The homogenate temperature was 83 °C (SEM 0.6 °C), and the non-homogenate tissue temperature at the treatment site was 60 °C (SEM 0.4 °C). The smear and histological analysis showed significant blood components and cellular debris in the homogenate, with some intact cells.Conclusion: The HIFU-induced homogenate of blood and tissue resulted in a statistically significant shorter HIFU application time for hemostasis. The incisions with homogenate had higher temperatures as compared to incisions without homogenate. Further studies of the correlation between homogenate formation and temperature must be done, as well as studies on the long-term effects of homogenate in achieving hemostasis.     

Self-sustained activity in a small-world network of excitable neurons

We study the dynamics of excitable integrate-and-fire neurons in a small-world network. At low densities p of directed random connections, a localized transient stimulus results either in self-sustained persistent activity or in a brief transient followed by failure. Averages over the quenched ensemble reveal that the probability of failure changes from 0 to 1 over a narrow range in p; this failure transition can be described analytically through an extension of an existing mean-field result. Exceedingly long transients emerge at higher densities p; their activity patterns are disordered, in contrast to the mostly periodic persistent patterns observed at low p. The times at which such patterns die out follow a stretched-exponential distribution, which depends sensitively on the propagation velocity of the excitation.     

Steam distillation-solid-phase microextraction for the detection of Ephedra sinica in herbal preparations

A new method involving concurrent solid-phase microextraction combined with continuous hydrodistillation of essential oil was developed. This new methodology allowed for the detection by GC-MS of very small amounts of a diagnostic peak for the authentication of Ephedra sinica, in a short period of time and using only small sample sizes. This diagnostic peak was identified as 4-vinylanisole, and elucidated from the chromatographic profile allowed for the identification of a sample as E. sinica among other species investigated in this study. To the best of our knowledge this is the first report on using continuous solid-phase microextraction coupled to hydrodistillation for the investigation of essential oil components, and the first report of 4-vinylanisole as a marker compound for E. sinica. A total of 46 collections representing 21 species of Ephedra were studied.     

A chemometric study of active parameters and their interaction effects in a nebulized sheath-liquid electrospray interface for capillary electrophoresis-mass spectrometry

A chemometrics approach has been used for evaluating the effect of four experimental parameters when coupling capillary electrophoresis (CE) to electrospray ionization-mass spectrometry (ESI-MS). Electrospray voltage, sheath-liquid flow rate, nebulizing gas flow rate, and spray needle position in respect to the MS orifice were varied according to a full factorial design. In addition to main effects, two interaction effects could be identified as significant when measuring the peak intensity of the analytes, from a sample mixture containing peptides and pharmaceuticals. The first interaction effects, between the nebulizing gas flow rate and the sheath-liquid flow rate, and the second interaction effect, between the nebulizing gas flow rate and the spray position, could further explain the impact that these variables have on the spray performance. The number of theoretical plates and the baseline noise were also measured. The sheath-liquid flow was found to significantly affect the separation efficiency, while the noise level mainly was controlled by the nebulizing gas flow. The same factorial design was also used for a CE capillary with lower internal diameter (ID) and the effects of the same variables were compared on those capillaries using equal injection volume for both capillaries. Similar trends were obtained in both capillaries but capillary ID was shown to be a significant variable when evaluating both capillaries in a single model. It was found that a capillary with 25 microm ID provided improved CE-MS performance over than corresponding 50 microm ID capillary. Enhanced sensitivity was obtained using the narrow-bore capillary, and at lower sheath-liquid flow rate the 25 microm ID capillary also gave rise to more efficient peaks.