Simultaneous determination of mercury and arsenic by anodic stripping voltammetry

An electrochemical method for the simultaneous determinations of Hg^II concentration and total As^III and As^V concentration has been developed. The method does not require the additional preliminary step of the chemical reduction of As^V to As^III, or oxidation of As^III to As^V before stripping analysis takes place. Also, the method for the simultaneous determination of Hg^II concentration and As^III concentration is described. Measurements were performed in 0.1 M HCl using a gold-plated graphite electrode as sensor. Detection limits for both methods are below 0.4 ppb. Relative standard deviation did not exceed 15%. The possible interference by other trace metals was investigated. Analyses of natural water and industrial solutions were made using proposed methods and AAS. The t-test demonstrates that there was no significant difference between the results obtained with these methods. Proposed methods decrease the time of analysis because concentrations of the Hg^II and arsenic ions were measured simultaneously. Also, the removal of the additional step of chemical reduction of As^V to As^III or oxidation of As^III to As^V decreases analysis time, and also reduces the chance of contamination due to the use of additional reagents.     

Acetylation and molecular mass effects on barrier and mechanical properties of shortfin squid chitosan membranes

Chitosan samples with different N-deacetylation levels were obtained from β-chitin under heterogeneous alkali conditions. Oxidative depolymerisation was performed to attain low-acetylated chitosan samples with different molecular mass. Water vapour permeability, membrane swelling and tensile mechanical properties were analysed in plasticized self-supporting chitosan membranes. The main purpose was to describe unambigously the effect of the biopolymer molecular mass and acetylation degree on these properties. Commercially available chitosan samples derived from α-chitin were also studied for comparison. The equilibrium degree of swelling in water and the water vapour permeability increase by increasing the molecular mass or the degree of acetylation. Regarding the effect on the mechanical properties, generally harder and tougher membranes were obtained for chitosans with higher molecular mass or lower acetylation degree. These observations are tentatively explained based on the different structural characteristics of the polymer and can lead to a better understanding of the tools necessary to tailor a specific type of chitosan membrane.     

Preparative Droplet Counter-Current Chromatography for the Separation of the New Nor-Seco-Triterpene and Pentacyclic Triterpenoids from Qualea Parviflora

The methanolic extract of the bark of the medicinal plant Qualea parviflora (Vochysiaceae) contains new nor-seco-triterpene and pentacyclic triterpenoids. They were separated in a preparative scale using droplet counter-current chromatography. The optimum solvent used was composed of a mixture of CHCl₃/MeOH/H₂O (43:37:20, v/v) in the descending mode and led to a successful separation of the new compound 28-nor-17, 22-seco-2α, 3β, 19, 22, 23-pentahydroxy-Δ¹²-oleanane, besides the known triterpenoids bellericagenin B, bellericaside B and arjunglucoside I . Identification was performed by ESI-MS, ¹H NMR and ¹³C NMR analyses.     

On the equivalence between the energy and virial routes to the equation of state of hard-sphere fluids

The energy route to the equation of state of hard-sphere fluids is ill defined since the internal energy is just that of an ideal gas, and thus it is independent of density. It is shown that this ambiguity can be avoided by considering a square-shoulder interaction and taking the limit of vanishing shoulder width. The resulting hard-sphere equation of state coincides exactly with the one obtained through the virial route. Therefore, the energy and virial routes to the equation of state of hard-sphere fluids can be considered as equivalent.     

Rapid determination of aliphatic amines in water samples by pressure-assisted monolithic octadecylsilica capillary electrochromatography-mass spectrometry

A pressure-assisted capillary chromatography-mass spectrometry method based on the use of a monolithic octadecylsilica (ODS) capillary is proposed for the determination of aliphatic amines. A 25 mM citric acid buffer containing 10% methanol is used as running electrolyte. Separation is achieved by simultaneously applying a capillary electrophoresis (CE) voltage of 13 kV and an overimposed pressure of 8 bar. The use of pressure is required to ensure stable electrospray conditions. Analysis times are reduced by using a capillary column consisting of a 30 cm long monolithic silica capillary column bound with ODS and a fused-silica capillary column also 30 cm long. The proposed method was successfully applied to the determination of low-molecular-weight aliphatic amines in tap and river water. The analysis of real samples requires cleanup and preconcentration, which can be performed automatically by inserting a minicolumn in the replenishment system of the commercial instrument.     

Sulphate preconcentration by anion exchange resin in flow injection and its turbidimetric determination in water

A preconcentration procedure was established for sulphate determination in rain waters at the mg/l level, employing a small column packed with the AG1-X8 (200-400 mesh) anionic resin inserted into a flow injection system. Sulphate determination was performed by using the turbidimetric method based on reaction with barium. For concentrations within 0.10 and 2.0 MgSO(2-)(4)/l, a throughput of 50 determinations/hr was achieved, and the relative standard deviation of results was better than 2%.     

A theoretical investigation of the interaction between H,Li, Na,K, and fullerenes

We studied the interaction between H, Li, Na, and K with one and two C₆₀ molecules using unrestricted Hartree–Fock (UHF) methods. We investigated the effects of distances between the doping atoms and the C₆₀ clusters, total charges, interaction energies, stabilities, HOMO‐LUMO energy differences, charge distribution, and potential energy surfaces. The effect of each doping atom was analyzed and potential technological applications discussed. © 2004 Wiley Periodicals, Inc. Int J Quantum Chem, 2005     

Comparison of the Structural Information on Sol-Gel Systems Provided by Pyrene Labeled Fluorescent Probes

The influence of the acid catalyst concentration on the structural evolution of a sol-gel system was studied by doping TEOS based starting solutions with two fluorescent probes: a polystyrene chain (M _n =1700) and a much shorter alkane chain (M=172), both of them labeled at both ends with 1-pyrenyl. For this purpose, each probe was incorporated in two TEOS∶H₂O∶C₂H₅OH mixtures (molar ratios 1∶4∶1), one at pH 1.2 and the other at pH 2.5 (respectively below and above the isoelectric point of silica). Very low concentrations of the probes were used (≤10⁻⁶ M), so the pyrene dimmers and excimers were formed only intramolecularly. The ratios of excimer to monomer fluorescence intensities at excitation wavelength of 360 nm (where mainly the ground state pyrene dimmers are excited) were studied as a function of time. Different evolutions of these ratios were observed, which allowed us to predict that the silica structure developsvia the formation of primary particles, even at pH values below the isoelectric point of silica, where it is not possible to directly detect their formation.     

Molybdenum(VI)-complexes with chiral N,O-ligands derived from carbohydrates: synthesis, structure and catalytic properties in asymmetric olefin epoxidation

Novel chiral 2′-pyridinyl alcohols derived from isopropylidene-protected carbohydrates are reported. They show different characteristics at the hydroxy group, but are all suitable ligands for chiral molybdenum(VI) complexes of the type MoO₂L₂ (L = chiral 2′-pyridinyl alcoholate). MoO₂(acac)₂ served as starting material in the complex syntheses. The structure of one ligand and one dioxo complex were exemplary established by X-ray crystallography. For catalytic runs in the enantioselective epoxidation catalysis trans-methylstyrene was used as model substrate, tert-butylhydroperoxide and cumolhydroperoxide, resp., as the oxidant.     

Improvement in steroid screening for doping control with special emphasis on stanozolol

The Medical Commission of the International Olympic Committee forbids the use of anabolic androgenic steroids and beta2-agonists to improve athletic performance. In this work we have selected examples of anabolic androgenic compounds and their metabolites to evaluate the GC-MS analysis of some trimethylsilyl derivatives. The aim is to set the best GC conditions to improve the detection within the whole range of analyte elution temperatures. The initial column temperature was changed to 105 or 140 degrees C followed by 40 degrees C min(-1) to 200 degrees C and then 15 degrees C min(-1) to 300 degrees C. Using 140 degrees C as the initial oven temperature it was possible to obtain narrower initial analyte distributions for the compounds that elutes at the beginning of the chromatogram as clenbuterol, mabuterol, epimethylenediol and norandrosterone, without loss of derivatized metabolites signal. Later. eluting analytes, such as the stanozolol metabolites, furazabol and oxandrolone were not affected. Temperatures below 140 degrees C. resulted in partial derivatization for some analytes mainly stanozolol related structures. Therefore evaluation of derivatization conditions as occurring in three steps, the vial, vaporization chamber and capillary column, was thoroughly assessed. The new program temperature improves the signal-to-noise ratio for some compounds and shows adequate resolution for endogenous compounds. Some of the difficult key separations necessary for doping control enforcement were also obtained with the proposed method.