Vibrational infrared intensities and polar tensors of 1,2-difluoroethylenes

The polar tensors of cis and trans-1,2-difluoroethylenes have been determined with new normal modes based in a reassignment of nu(7) and nu(12) bands of the trans isomers and frequency values corrected for Fermi resonances and phase shifts. The signs of the dipole moment derivatives (and its directions, for B(u) symmetry species) were considered to be those of MP2/6-31G** estimates. Root mean square errors calculated for the new tensor element values from each pair of isotopomers (trans-1,2-C(2)H(2)F(2)/trans-1,2-C(2)D(2)F(2) and cis-1,2-C(2)H(2)F(2)/cis-1,2-C(2)D(2)F(2)) show that the new polar tensor sets fit the isotopic invariance criterion better than previously reported sets. The accuracy of polar tensor transference procedures was tested by calculating the infrared intensities of trans-1,2-C(2)H(2)F(2) through the new polar tensors of the cis isomer. The resulting estimates are very accurate and also support the new band assignment, though the A(6) intensity remains still somewhat underestimated.     

Ester synthesis catalyzed by Mucor miehei lipase immobilized on magnetic polysiloxane-polyvinyl alcohol particles

Mucor miehei lipase was immobilized on magnetic polysiloxane-polyvinyl alcohol particles by covalent binding with high activity recovered. The performance of the resulting immobilized biocatalyst was evaluated in the synthesis of flavor esters using heptane as solvent. The impact on reaction rate was determined for enzyme concentration, molar ratio of the reactants, carbon chain length of the reactants, and alcohol structure. Ester synthesis was maximized for substrates containing excess acyl donor and lipase loading of 25 mg/mL. The biocatalyst selectivity for the carbon chain length was found to be different concerning the organic acids and alcohols. High reaction rates were achieved for organic acids with 8 or 10 carbons, whereas increasing the alcohol carbon chain length from 4 to 8 carbons gave much lower esterification yields. Optimal reaction rate was determined for the synthesis of butyl caprylate (12 carbons). Esterification performance was also dependent on the alcohol structure, with maximum activity occurring for primary alcohol. Secondary and tertiary alcohols decreased the reaction rates by more than 40%.     

Spectroscopic and electrochemical studies on (2-hydroxypicolinate)-bis(2,2′-bipyridine)ruthenium(II) and related complexes

Summary The synthesis, spectra and electrochemistry of [Ru(bipy)₂-(picOH)]⁺ and -picO-[Ru(bipy)₂]₂ ²⁺ (bipy = 2,2-bipyridine and picOH = 3-hydroxypicolinate ion) are described. The spectroscopic properties in the visible region are dominated by the intense Ru bipy chargetransfer transitions. In the binuclear complex, the two [Ru(bipy)₂L]²⁺ moieties are nonequivalent, exhibiting E _1/2 = 0.69 and 1.20 V versus s.h.e. The partially oxidized species exhibits a weak intervalence transfer band at 1085 nm, and is consistent with a Robin-Day class II mixed valence complex.     

Developing a sequential injection-square wave voltammetry (SI-SWV) method for determination of atrazine using a hanging mercury drop electrode

This paper describes the development of a sequential injection analysis method to automate the determination of atrazine by square wave voltammetry exploiting the concept of monosegmented flow analysis to perform in-line sample conditioning and standard addition. To perform these tasks, an 800 μL monosegment is formed, composed by 400 μL of sample and 400 μL of buffer/standard solution. To obtain an efficient homogenization, the sample solution is divided in five zones intercalated by four zones of the Britton-Robinson buffer (pH 2.0) in presence of appropriate concentration of NaNO₃ and varying atrazine standard concentrations. This mixture zone is isolated from the carrier solution by two 100 μL air bubbles. After homogenization in an auxiliary reaction coil the mixture zone is injected toward the flow cell, which is adapted to the capillary of a hanging drop mercury electrode, at a flow rate of 50 μL s⁻¹. After a suitable delay time, the potential is scanned from −0.5 to −1.2 V versus Ag/AgCl using a frequency of 300 Hz and pulse height of 25 mV. The linear dynamic range is observed for atrazine concentrations between 1.16 × 10⁻⁷ and 2.32 × 10⁻⁶ mol L⁻¹, obeying the linear equation i_p = (−6.91 ± 0.07) × 10⁸[atrazine] + (4 ± 8), with r² = 0.9996, for which the slope is given in nA L mol⁻¹. The detection and quantification limits of the method are 2.1 × 10⁻⁸ and 7.0 × 10⁻⁸ mol L⁻¹, respectively. The sampling frequency is 37 h⁻¹, when the standard addition protocol is followed. This frequency can be increased to 42 h⁻¹ if the protocol to obtain in-line calibration curve is used for quantification. The method was applied for determination of atrazine in spiked river water samples and its accuracy was evaluated by comparison with the batch standard addition approach, which revealed that there is no evidence of statistically significant differences between the two methods.     

Synthesis, characterization and thermal studies on solid compounds of 2-chlorobenzylidenepyruvate of heavier trivalent lanthanides and yttrium(III)

Solid-state compounds of general formula LnL_3⋅nH₂O, where Ln represents heavier lanthanides and yttrium and L is 2-chlorobenzylidenepyruvate, have been synthesized. Chemical analysis, simultaneous thermogravimetry-differential analysis (TG-DTA), differential scanning calorimetry (DSC), X-ray powder diffractometry, elemental analysis and infrared spectroscopy have been employed to characterize and to study the thermal behaviour of these compounds in dynamic air atmosphere. On heating these compounds decompose in four (Gd, Tb, Ho to Lu, Y) or five (Eu, Dy) steps. They lose the hydration water in the first step and the thermal decomposition of the anhydrous compounds up to 1200°C occurs with the formation of the respective oxide, Tb₄O₇ and Ln₂O₃ (Ln=Eu, Gd, Dy to Lu and Y) as final residue. The dehydration enthalpies found for these compounds (Eu, to Lu and Y) were: 65.77, 55.63, 86.89, 121.65, 99.80, 109.59, 131.02, 119.78, 205.46 and 83.11 kJ mol^-1, respectively.     

Second-order nonlinear optical properties of the Ag(111)/electrolyte interface in the presence of self-assembled monolayers containing conjugated pi systems. I. Alpha-functionalized terthiophene films on Ag(111)

The nonlinear optical properties of self-assembled monolayers obtained from bonding two different alpha-functionalized terthiophenes (alpha-T3) to (111) silver electrode surfaces have been investigated using second harmonic generation (SHG). The two (alpha-T3) compounds used were functionalized with alkane chains of different lengths (C8 and C4), and each was terminated with a thiol anchoring group. A nitrile group was attached to the terminal thiophene ring of the (alpha-T3) compound with the C4 chain. The orientation of the polarization of the incident beam was changed systematically and gradually between "p" and "s" orientation and the SH signal (isotropic and anisotropic contributions) analyzed in both directions ("P" and "S"). The symmetry of the system was reduced by the presence of the adlayers from C3v to C3. The dependence on the applied potential and the incident wavelength has also been studied. The relative magnitudes and phases of the various second-order tensor elements have been estimated and compared with the values for a bare surface. A resonance process in the (alpha-T3) pi moiety has been investigated, and from this, the effective "band-gap" energies of the organic semiconductor SAMs (i.e., the energy difference between the pi-pi bands) have been estimated.     

Classification of white wine aromas with an electronic nose

This paper reports the use of a tin dioxide multisensor array based electronic nose for recognition of 29 typical aromas in white wine. Headspace technique has been used to extract aroma of the wine. Multivariate analysis, including principal component analysis (PCA) as well as probabilistic neural networks (PNNs), has been used to identify the main aroma added to the wine. The results showed that in spite of the strong influence of ethanol and other majority compounds of wine, the system could discriminate correctly the aromatic compounds added to the wine with a minimum accuracy of 97.2%.     

Electrochromic properties of poly(alkoxy-terthiophenes): an experimental and theoretical investigation

Much effort has been made to synthesize novel compounds and enhance the optical properties of poly(terthiophenes). The electrochromic properties of poly(4,4′′-dimetoxy-3′-methyl-2′-5′,2′′-terthiophene) (PDMMT) and poly(4,4′′-dipentoxy-3′-methyl-2′-5′,2′′-terthiophene) (PDPMT) have been studied focusing on the differences in the alkoxy-group length. Theoretical calculations were employed to elucidate the structural and thermodynamic stability of the monomers and dimmers. The results showed that in this type of thiophenes large alkoxy chains assist positive charge dispersion through hyperconjugative effect. Thus, PDPMT is thermodynamically more stable than PDMMT in the oxidized state, leading to better electrochromic stability and optical memory.     

Production of18F using a natural water target at the CV-28 cyclotron at IPEN-CNEN/SP

The development of an automated water target for the production of¹⁸F is described. The system was fully fested and shown to be reliable and secure. The chemical separation of¹⁸F was carried out using an anionexchange resin and K₂CO₃ as eluent. The¹⁸F production yields were, on average, (4.81±0.42) MBq/Ah and the specific activity was higher than 6.623×10⁵ MBq/mmol. Heat transfer measurements and calculations were made.     

Kinetics and Mechanism of Ni(II) Chelation in Model and Real Solutions of Xylem Sap of Quercus ilex

The kinetics of formation and dissociation of Ni(II) complexes with oxalic and citric acids was studied by cyclic voltammetry in model solutions of xylem sap of Q. ilex (the dominant tree growing on serpentine soils of Northeast Portugal) using representative concentrations, pH and ionic strength. The role of magnesium on complex formation was analyzed from solutions where Mg is present at concentration levels found in the xylem sap of Q. ilex growing on both nonserpentine and serpentine soils. Kinetics studies were also done in diluted solutions of real xylem sap samples, spiked with increasing amounts of magnesium. The values obtained for the apparent rate constants were those anticipated by the proposed model. To test the validity of the methodology and mechanisms, formation rate constants, k_f (M^?1 s^?1) of Ni(II) complexes with citrate and oxalate were evaluated that compare with the values from Eigen mechanism.