Reciprocal Ontological Models Show Indeterminism Comparable to Quantum Theory

We show that within the class of ontological models due to Harrigan and Spekkens, those satisfying preparation-measurement reciprocity must allow indeterminism comparable to that in quantum theory. Our result implies that one can design quantum random number generator, for which it is impossible, even in principle, to construct a reciprocal deterministic model.     

A liquid chromatography–tandem mass spectrometry method for the quantitation of actarit in rabbit plasma: application to pharmacokinetics and metabolic stability

Actarit (ATR), 4‐acetylaminophenylacetic acid is an orally effective disease‐modifying anti‐rheumatic drug widely prescribed for the treatment of rheumatoid arthritis. The present study demonstrates the first report on a selective and sensitive liquid chromatography–tandem mass spectrometry method for the quantification of ATR in rabbit plasma using p‐coumaric acid as an internal standard (IS). Following liquid–liquid extraction, chromatographic separation of the reconstituted samples was achieved isocratically on a Syncronis‐C18 column with a mobile phase consisting of aqueous ammonium acetate (10 mM, pH 4)‐ methanol and acetonitrile mixture (8 : 92, v/v) at a flow rate of 0.6 ml/min. ATR and IS were detected using electrospray ionization operated in negative multiple reaction monitoring mode. The calibration curve was linear (r² ≥ 0.990) over the concentration range of 1–4000 ng/ml with a lower limit of quantitation of 1 ng/ml. The mean extraction recovery of ATR and IS from rabbit plasma was greater than 85%. The method complied well with US Food and Drug Administration guidelines for selectivity, sensitivity, accuracy, precision, matrix effect, dilution integrity, carry‐over effect and stability. The method was successfully applied to in vitro metabolic stability (using rabbit liver microsomes) and in vivo pharmacokinetic study after oral administration of ATR at a dose of 10 mg/kg in New Zealand rabbits. Copyright © 2015 John Wiley & Sons, Ltd.     

An Efficient Green Synthesis of a New Class of α‐Aminophosphonates under Microwave Irradiation Conditions in the Presence of PS/PTSA

The present work focuses on the study of catalytic activity of polystyrene‐supported p‐toluenesulfonic acid (PS/PTSA) and the synthesis of α‐aminophosphonates from the Kabachnik–Fields (KF) reaction under microwave irradiation in solvent‐free conditions. Recently, the catalytic activity of PS/PTSA was tested with good yields. This procedure is the simplest, most straightforward, environment friendly method for the synthesis of α‐aminophosphonates from simple to different substituted aldehyde substrates. Furthermore, this catalyst can be recovered and reused without loss of its catalytic activity.     

Finding MOFs for highly selective CO2/N2 adsorption using materials screening based on efficient assignment of atomic point charges

Electrostatic interactions are a critical factor in the adsorption of quadrupolar species such as CO(2) and N(2) in metal-organic frameworks (MOFs) and other nanoporous materials. We show how a version of the semiempirical charge equilibration method suitable for periodic materials can be used to efficiently assign charges and allow molecular simulations for a large number of MOFs. This approach is illustrated by simulating CO(2) and N(2) adsorption in ~500 MOFs; this is the largest set of structures for which this information has been reported to date. For materials predicted by our calculations to have promising adsorption selectivities, we performed more detailed calculations in which accurate quantum chemistry methods were used to assign atomic point charges, and molecular simulations were used to assess molecular diffusivities and binary adsorption isotherms. Our results identify two MOFs, experimentally known to be stable upon solvent removal, that are predicted to show no diffusion limitations for adsorbed molecules and extremely high CO(2)/N(2) adsorption selectivities for CO(2) adsorption from dry air and from gas mixtures typical of dry flue gas.     

Theoretical investigation on first-principles electronic and thermal properties of some CdRE intermetallics

Ab initio calculation on B2-cadmium rare earth (RE), CdRE (RE=La, Ce and Pr) intermetallics has been performed at T=0 K with respect to their structural, electronic and thermal properties. The structural and electronic properties are derived using self-consistent tight binding linear muffin tin orbital method at ambient and at high pressure. Other properties like lattice parameter, bulk modulus, density of states, electronic specific heat coefficient, cohesive energy, heat of formation, Debye temperature and Grüneisen constant for CdRE are also estimated. The RE-f effect can be seen in CdPr in terms of variation in the density of states and opens a possibility of structural instability. A pressure induced variation of Debye temperature is also presented for three cadmium rare earth intermetallics.     

Surfactant-Assisted Acid Pretreatment of Sugarcane Tops for Bioethanol Production

Sugarcane tops is one of the largest biomass resources in India and in tropical countries such as Brazil in terms of surplus availability. Conversion of this feedstock to ethanol requires pretreatment to make it more accessible for the enzymes used in saccharification. Though several pretreatment regimens have been developed for addressing biomass recalcitrance, very few seem to be promising as an industrial process. A novel hybrid method involving use of mild acid and surfactant was developed which could effectively remove lignin and improve the sugar yield from sugar cane tops. Operational parameters that affect the pretreatment efficiency (measured as yield of sugars) were studied and optimized. Changes in structural properties of the biomass were studied in relation to the pretreatment process using scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier Transform Infrared (FTIR) analysis, and the changes in chemical composition was also monitored. The biomass pretreated with the optimized novel method could yield 0.798?g of reducing sugars per gram of pretreated biomass upon enzymatic hydrolysis.     

Turbulence in noninteger dimensions by fractal Fourier decimation

Fractal decimation reduces the effective dimensionality D of a flow by keeping only a (randomly chosen) set of Fourier modes whose number in a ball of radius k is proportional to k(D) for large k. At the critical dimension D(c)=4/3 there is an equilibrium Gibbs state with a k(-5/3) spectrum, as in V. L'vov et al., Phys. Rev. Lett. 89, 064501 (2002). Spectral simulations of fractally decimated two-dimensional turbulence show that the inverse cascade persists below D=2 with a rapidly rising Kolmogorov constant, likely to diverge as (D-4/3)(-2/3).     

Porphyrin nanochannels reinforced by hydrogen bonding

Carboxyl groups were introduced at the peripheral positions of dodecaphenylporphyrin to link nanochannel structures with intermolecular hydrogen bonds to make the supramolecular structures robust.     

Electrical and structural properties of Pd/V/n‐type InP (111) Schottky structure as a function of annealing temperature

Palladium/Vanadium (Pd/V) Schottky structures are fabricated on n‐type InP (100) and the electrical, structural and surface morphological characteristics have been studied at different annealing temperatures. The extracted barrier height of as‐deposited Pd/V/n‐InP Schottky diode is 0.59 eV (I–V) and 0.79 eV (C–V), respectively. However, the Schottky barrier height of the Pd/V Schottky contact slightly increases to 0.61 eV (I–V) and 0.84 eV (C–V) when the contact is annealed at 200 °C for 1 min. It is observed that the Schottky barrier height of the contact slightly decreases after annealing at 300, 400 and 500 °C for 1 min in N₂ atmosphere. From the above observations, it is clear that the electrical characteristics of Pd/V Schottky contacts improve after annealing at 200 °C. This indicates that the optimum annealing temperature for the Pd/V Schottky contact is 200 °C. Basing on the auger electron spectroscopy and X‐ray diffraction results, the formation of Pd‐In intermetallic compound at the interface may be the reason for the increase of barrier height upon annealing at 200 °C. The formation of phosphide phases at the Pd/V/n‐InP interface could be the reason for the degradation in the barrier heights after annealing at 300, 400 and 500 °C. From the AFM results, it is evident that the overall surface morphology of the Pd/V Schottky contacts is fairly smooth. Copyright © 2011 John Wiley & Sons, Ltd.     

Photophysical characterization of 1,8 naphthalimide in micelle-diblock copolymer nano-composite: a case of morphological transformation and vesicle formation

This paper reports a morphological transition of the spherical colloidal structures of the sodium dodecyl sulfate-polyethylene-b-polyethylene glycol (SDS-PE-b-PEG) complex and anionic micelle (SDS) to "rod-shaped" colloidal structures induced by a charge transfer dye, 1,8-naphthalimide (NAPMD) (forms anions in aqueous solution by intermolecular charge transfer). The distinct steady-state results of NAPMD in the above two media point toward the formation of a new microenvironment. SDS and SDS-PE-b-PEG form unilamellar (ULV) and multilamellar vesicles (MLV), respectively, along with the rod-shaped colloidal structures as observed from transmission electron microscopy (TEM) images. This dye causes a variation in the hydrophilic/hydrophobic ratio and forms a hydrogen bond with the copolymer in the SDS-PE-b-PEG complex and subjected to electrostatic interaction with the SDS micelle in aqueous solution, which causes this morphological transformation. These vesicles show complete encapsulation of a hydrophobic dye in its interior as evident from the TEM images. ULV get ruptured at low pH, pointing toward their lower stability over MLV at low pH value. The formation of these vesicles with complete idea of its mechanism, encapsulation of bioactive molecules and its rupture at lower pH raise hope as a potential nanoscale vehicle for biologically relevant compounds and their release at low pH medium.