A search for rare types of fission induced in silver and bromine nuclei

Ternary and quaternary fission produced in silver and bromine nuclei have been studied withK5 nuclear emulsion exposed to 1.8 GeV/cK ⁻ beams. The frequency of the ternary events is found to be ∼0.08 of that of the binary events produced in the same volume of the emulsion. The range ratio and range distribution of the fission fragments are studied and the angles between each pair of the fragments are determined. Ranges are found to vary from 5 to 40μ with a maximum number lying between 5 and 10μ. The angles between the fission fragments are found to form a broad distribution extending from 40° to 180°. A few of the events have also been analysed to give them a possible identity. A possible case of quaternary fission has also been reported. This paper was presented at the Symposium on 3rd High Energy Physics held at Bhubaneswar during November 1976.     

Lifetime measurements for some levels in Be-like Cl XIV and S XIII

Lifetime measurements have been carried out for some low lying (n = 2) levels in the four-electron ions Cl XIV and S XIII using the beam-foil technique. Accurate oscillator strengths for the 2 s2 ¹ S - 2 s 2 p ¹ P o transition have been determined by the inclusion of prominent cascades in the analysis. Lifetimes of the levels of the 2 p2 ³ P j multiplet have also been measured for both ions. The results are compared with theoretical predictions and earlier measurements. Received: 29 October 1997 / Revised: 10 February 1998 / Accepted: 5 March 1998     

Detailed electrical measurements on sago starch biopolymer solid electrolyte

The biopolymer solid electrolyte has been synthesized and characterized. Potassium iodide (KI) has been added in polymer matrix to develop solid polymer electrolyte. Relationships between electrical, ionic transport parameter and mechanism have been studied in detail. Impedance spectroscopy reveals the detailed electrical studies and ion transport mechanism. The ion dissociation factor is compared with a measured dielectric constant at a fixed frequency. The dielectric data are calculated which support the ionic conductivity data.     

On some permutation binomials and trinomials over $$\mathbb {F}_{2^n}$$

In this work, we completely characterize (1) permutation binomials of the form \(x^{{{2^n -1}\over {2^t-1}}+1}+ ax \in \mathbb {F}_{2^n}[x], n = 2^st, a \in \mathbb {F}_{2^{2t}}^{*}\), and (2) permutation trinomials of the form \(x^{2^s+1}+x^{2^{s-1}+1}+\alpha x \in \mathbb {F}_{2^t}[x]\), where s, t are positive integers. The first result, which was our primary motivation, is a consequence of the second result. The second result may be of independent interest.     

A copper(II) complex of benzimidazole-based ligand: synthesis,structure, redox aspects and fluorescence properties

Employing 1-(2-methoxybenzyl)-2-(2-methoxyphenyl)-1H-benzimidazole (bpb) as a monodentate ligand, a new greenish-blue copper(II) complex, [Cu(bpb)₂(NO₃)₂] (1a), has been synthesized. 1a has been characterized analytically and spectroscopically. The X-ray crystal structure of 1a reveals that it adopts a cis disposition with respect to the ligands. The solid state structure of 1a is stabilized by intramolecular offset face-to-face π–π stacking. Non-covalent supramolecular edge-to-face C–H?π interactions with neighboring molecules give 1-D supramolecular chains that further lead to the formation of an assembled 3-D supramolecular metal-organic framework via hydrogen bonding interactions. 1a shows blue fluorescence most likely due to intramolecular offset face-to-face π–π stacking. At room temperature, 1a is one-electron paramagnetic. It shows a rhombic EPR spectrum with g₁ = 2.12, g₂ = 2.42, and g₃ = 2.52 in the solid state at liquid nitrogen temperature. In cyclic voltammetry, 1a displays a one-electron oxidative Cu(II)/Cu(III) couple. Our DFT calculations, corroborate the observed experimental results of 1a.     

Excited electronic state decomposition of furazan based energetic materials: 3,3'-diamino-4,4'-azoxyfurazan and its model systems, diaminofurazan and furazan

We report the first experimental and theoretical study of gas phase excited electronic state decomposition of a furazan based, high nitrogen content energetic material, 3,3'-diamino-4,4'-azoxyfurazan (DAAF), and its model systems, diaminofurazan (DAF) and furazan (C2H2N2O). DAAF has received major attention as an insensitive high energy explosive; however, the mechanism and dynamics of the decomposition of this material are not clear yet. In order to understand the initial decomposition mechanism of DAAF and those of its model systems, nanosecond energy resolved and femtosecond time resolved spectroscopies and complete active space self-consistent field (CASSCF) calculations have been employed to investigate the excited electronic state decomposition of these materials. The NO molecule is observed as an initial decomposition product from DAAF and its model systems at three UV excitation wavelengths (226, 236, and 248 nm) with a pulse duration of 8 ns. Energies of the three excitation wavelengths coincide with the (0-0), (0-1), and (0-2) vibronic bands of the NO A 2Sigma+<--X 2Pi electronic transition, respectively. A unique excitation wavelength independent dissociation channel is observed for DAAF, which generates the NO product with a rotationally cold (20 K) and a vibrationally hot (1265 K) distribution. On the contrary, excitation wavelength dependent dissociation channels are observed for the model systems, which generate the NO product with both rotationally cold and hot distributions depending on the excitation wavelengths. Potential energy surface calculations at the CASSCF level of theory illustrates that two conical intersections between the excited and ground electronic states are involved in two different excitation wavelength dependent dissociation channels for the model systems. Femtosecond pump-probe experiments at 226 nm reveal that the NO molecule is still the main observed decomposition product from the materials of interest and that the formation dynamics of the NO product is faster than 180 fs. Two additional fragments are observed from furazan with mass of 40 amu (C2H2N) and 28 amu (CH2N) employing femtosecond laser ionization. This observation suggests a five-membered heterocyclic furazan ring opening mechanism with rupture of a CN and a NO bond, yielding NO as a major decomposition product. NH2 is not observed as a secondary decomposition product of DAAF and DAF.     

The Total Synthesis of Eleutherobin: A Surprise Ending

An “sp ² –sp ³ Stille coupling” of the vinyl triflate 1 and the stannyl compound 2 is a key step toward the completion of the total synthesis of eleutherobin, a natural product exhibiting taxol-like cytotoxic activity.     

Molecular interactions between amine and cyclic ketones at different temperatures

Measurement of densities ρ, viscosities η, and ultrasonic speeds u has been carried out for binary mixtures of N,N-diethylaniline (N,N-DEA) with acetophenone, cyclopentanone, cyclohexanone (CH), and 2-methylcyclohexanone (Me-CH) and their pure liquids at (303.15 and 308.15) K. These experimental data have been used to calculate the excess molar volume V ^E, deviation in ultrasonic velocity ?u, deviation in isentropic compressibility ?κ _s , and deviation in viscosity ?η. The variation of these properties with composition of the mixtures suggests dipole–dipole interactions and charge-transfer complex formation between N,N-diethylaniline and dipolar ketones. The magnitude of the property is found to depend on the chain length of the ketones’ molecule. The viscosity data have been correlated using three equations: Grunberg and Nissan (Nature 164:799–800, 1949), Katti and Chaudhri (J Chem Eng Data 9:442–443, 1964), and Hind et al. (Trans Faraday Soc 56:328–330, 1960). These results have been fitted to the Redlich–Kister polynomial using multiparametric nonlinear regression analysis to estimate the binary coefficients and standard errors.     

Graphene oxide (GO) catalyzed transamidation of aliphatic amides: An efficient metal-free procedure

Transamidation involves direct interconversion of an amide with amine, and represents an alternative to the common method of amide formation from the reaction of carboxylic acid with an amine. While the carboxamides have huge potential in biological systems and polymer industries, their formation from carboxylic acids requires activation by a suitable catalyst. A metal-free transamidation of aliphatic amide with aromatic amine catalyzed by graphene oxide (GO) has been developed and established as a general, synthetically useful and selective procedure. Graphene oxide bearing several carboxylic acids on the edges and having large surface area acts as an efficient and recyclable catalyst for transamidation.     

Cu(OAc)2 entrapped on ethylene glycol-modified melamine–formaldehyde polymer as an efficient heterogeneous catalyst for Suzuki–Miyaura coupling reactions

Research on Chemical Intermediates - This work is described as an environmental friendly approach for Cu(OAc)2 entrapped on ethylene glycol-modified melamine–formaldehyde-based polymeric...