Experimental measurements of acoustical properties of snow and inverse characterization of its geometrical parameters

Snow is a sound absorbing porous sintered material composed of solid matrix of ice skeleton with air (+water vapour) saturated pores. Investigation of snow acoustic properties is useful to understand the interaction between snow structure and sound waves, which can be further used to devise non-destructive way for exploring physical (non-acoustic) properties of snow. The present paper discusses the experimental measurements of various acoustical properties of snow such as acoustic absorption coefficient, surface impedance and transmission losses across different snow samples, followed by inverse characterization of different geometrical parameters of snow. The snow samples were extracted from a natural snowpack and transported to a nearby controlled environmental facility at Patsio, located in the Great Himalayan range of India. An impedance tube system (ITS), working in the frequency range 63–6300 Hz, was used for acoustic measurements of these snow samples. The acoustic behaviour of snow was observed strongly dependent upon the incident acoustic frequency; for frequencies smaller than 1 kHz, the average acoustic absorption coefficient was found below than 0.4, however, for the frequencies more than 1 kHz it was found to be 0.85. The average acoustic transmission loss was observed from 1.45 dB cm⁻¹ to 3.77 dB cm⁻¹ for the entire frequency range. The real and imaginary components of normalized surface impedance of snow samples varied from 0.02 to 7.77 and −6.05 to 5.69, respectively. Further, the measured acoustic properties of snow were used for inverse characterization of non-acoustic geometrical parameters such as porosity, flow resistivity, tortuosity, viscous and thermal characteristic lengths using the equivalent fluid model proposed by Johnson, Champoux and Allard (JCA). Acoustically derived porosity and flow resistivity were also compared with experimentally measured values and good agreement was observed between them.     

Investigating Two-Photon-Induced Fluorescence in Rhodamine-6G in Presence of Cetyl-Trimethyl-Ammonium-Bromide

We investigate the effect of cetyl-trimethyl-ammonium-bromides (CTAB) concentration on the fluorescence of Rhodamine-6G in water. This spectroscopic study of Rhodamine-6G in presence of CTAB was performed using two-photon-induced-fluorescence at 780 nm wavelength using high repetition rate femtosecond laser pulses. We report an increment of ～10 % in the fluorescence in accordance with ～12 % enhancement in the absorption intensity of the dye molecule around the critical micellar concentration. We discuss the possible mechanism for the enhancement in the two-photon fluorescence intensity and the importance of critical micellar concentration.     

Synthesis and characterization of immobilized activated carbon doped TiO2 thin films

Immobilized activated carbon doped TiO₂ thin films were prepared by sol–gel dip coating method by using Titanium IV isopropoxide as a precursor. Aim of our work is to synthesize and investigate the structural, surface morphology and optical properties of the synthesized thin film. X-ray diffraction pattern reveals that the crystallinity of the film increases with increase in temperature. Also, the structural parameters such as particle size, microstrain and dislocation density have been calculated. The formation of nanosphere of diameter ranging from 300 nm to 500 nm has been confirmed by Scanning electron microscope. Photocatalytic active large optical band gap at 3.75 eV was found by using UV–visible sspectrum.     

All- optical phase encoded 4-to-1 phase multiplexer using four wave mixing in semiconductor optical amplifier

Optics has already showed its potency over its electronic complements in case of superfast computing and communication systems. Semiconductor optical amplifier, (SOA) with its several nonlinear properties, plays a very crucial role in the development of high-speed all-optical processor. Multiplexer and demultiplexer are the extremely important element of the processor which takes part in utilizing different actions like encoding, decoding, routing, and the different process of data conversion and generation, etc. In this paper, the authors have proposed a scheme of phase encoded all-optical phase multiplexer using four wave mixing (FWM) property of semiconductor optical amplifier. Thus, the improved tolerance against fiber-nonlinearity and higher receiver sensitivity of phase encoding method with the fast occurring processes like FWM in SOA offers higher speed in this proposed scheme of multiplexing.     

A Quasi-3D Threshold Voltage Model for Dual-Metal Quadruple-Gate MOSFETs

Due to challenges with relentless scaling of conventional bulk complementary metal-oxide- semiconductor （CMOS） devices, non-conventional CMOS devices have been of great interest to scale metaboxide-semiconductor field effect transistors （MOSFETs） to the 32nm gate length and below effectively. Among non-conventional CMOS devices, quadruple-gate （QG） MOSFETs have been gaining interest because they are sup- posed to provide excellent electrostatic controllability for ultra-large-scale integration （ULSI） applications. A number of attempts have been made to analyze QG MOSFETs analytically with a great amount of success. Sharma et al. have presented an an- alytical threshold voltage model for QG MOSFETs using an isomorphic polynomial function for solv- ing the 3D Poisson equation. Chiang has presented a number of models of scaling length,threshold voltage and subthreshold current for QG MOS- FETs adopting a concept of the so-called equivalent number of gates （ENGs）.     

Dielectric, thermal and optical study of an unusually shaped liquid crystal

Dielectric measurements have been carried out for the determination of real and imaginary parts of the permittivity of a newly synthesized, unusually shaped liquid crystal. The sample has been investigated in the frequency range from 100 Hz to 10 MHz within a temperature range 80-130 °C. The dielectric measurements in the smectic A phase indicate a Cole-Cole type of dispersion, and the activation energy was found to be 5.5 meV by using the Arrhenius plot of relaxation time. In addition to this, thermal and optical transmittance studies have also been conducted in the above mentioned temperature range, and the temperature dependence of these parameters has been discussed in detail. The phase transition temperature obtained from a differential scanning calorimetry (DSC) study matches within 2 °C that was obtained from an optical transmittance study. The dielectric and optical behavior of the unusually shaped liquid crystal has been explained on the basis of a proposed theoretical model in which a sample possesses two different conformers having induced polarizations in opposite directions.     

Bioactivity of SiO2-CaO-P2O5-Na2O glasses containing zinc-iron oxide

Glasses with composition x(ZnO,Fe₂O₃)(65 − x)SiO₂20(CaO,P₂O₅)15Na₂O (6 ≤ x ≤ 21 mol%) were prepared by melt-quenching technique. Bioactivity of the glasses was investigated in vitro by examining apatite formation on the surface of glasses treated in acellular simulated body fluid (SBF) with ion concentrations nearly equal to those in human blood plasma. Formation of bioactive apatite layer on the samples treated in SBF was confirmed by using Fourier transform infrared reflection (FTIR) spectroscopy, grazing incidence X-ray diffraction (GI-XRD) and scanning electron microscope (SEM) equipped with energy dispersive X-ray spectrometer. Development of an apatite structure on the surface of the SBF treated glass samples as functions of composition and time could be established using the GI-XRD data. FTIR spectra of the glasses treated in SBF show features at characteristic vibration frequencies of apatite after 1-day of immersion in SBF. SEM observations revealed that the spherical particles formed on the glass surface were made of calcium and phosphorus with the Ca/P molar ratio being close to 1.67, corresponding to the value in crystalline apatite. Increase in bioactivity with increasing zinc-iron oxide content was observed. The results have been used to understand the evolution of the apatite surface layer as a function of glass composition and immersion time in SBF.     

Direct visualization of Young’s boundary diffraction wave

Experimental investigations on Young’s boundary diffraction wave are presented where a wavefront division interferometric scheme is used on diffracted wavefront to generate two-beam interference fringes in the geometrically shadow region. These fringes have good visibility and are observable in the whole space, strongly advocating the physical existence of Young’s boundary diffraction wave as a separate entity. Analysis of these fringes may provide vital information about the structure and nature of boundary diffraction wave e.g. existence in whole space, dependence of amplitude on obliquity factor etc.     

Preparation of MgB<Subscript>2</Subscript>/Fe superconductor wire by electrical self-heating

MgB₂/Fe wires were prepared by electrical self-heating of in situ powder-in-tube wires for the first time at ambient conditions. Characterization of the wires processed at 750 °C, 800 °C and 850 °C for 15 min by XRD, SEM, ϱ–T, susceptibility and J_C measurements shows that the MgB₂ formed is of high quality particularly with respect to phase purity and transport J_C. The method considerably reduces the overall energy consumption vis-à-vis the production cost, simplifies the complexity of the fabrication procedure and is promising for manufacture of high-quality MgB₂ superconducting wires. PACS 74.70.Ad; 74.62.Bf; 74.25.Fy; 74.25.Ha; 81.20.Hy